Sharp CD-ES222E User Manual / Operation Manual ▷ View online
13
CD-ES222E
03/10/29
CD-ES222E(UK).fm
TINSEA002SJZZ
CD Playb
ack
Listening to a CD (CDs)
This system can also play audio CD-R and CD-RW discs, but cannot
record.
Some audio CD-R and CD-RW discs may not be playable due to the
state of disc or the device that was used for recording.
record.
Some audio CD-R and CD-RW discs may not be playable due to the
state of disc or the device that was used for recording.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the OPEN/CLOSE button to open the disc tray.
4
Place the CD(s) on the disc tray, label side up.
When loading a third disc, press the DISC SKIP button to
turn the disc tray, then place the CD in the open position.
turn the disc tray, then place the CD in the open position.
z
CDs can be placed on any open position on the disc tray.
z
Be sure to place 8 cm (3") CDs in the middle of the disc po-
sitions.
sitions.
5
Press the OPEN/CLOSE button to close the disc tray.
Total number of tracks on the
CD whose number is flashing
CD whose number is flashing
Total playing time of the CD
whose number is flashing
whose number is flashing
6
To select the CD you want to listen to first, press one of the
1 - 3 buttons on the remote control.
7
Press the / button to
start playback.
start playback.
z
Playback will begin from track 1 on the disc you have select-
ed to play. After that disc finishes playing, the next disc will
automatically start playback.
ed to play. After that disc finishes playing, the next disc will
automatically start playback.
z
When the last track on the third disc has finished playing, the
CD player will automatically stop.
CD player will automatically stop.
z
When there is no CD in one of the disc 1 - 3 positions, that
position will be skipped and the next CD will begin to play.
position will be skipped and the next CD will begin to play.
12 cm (5")
8 cm (3")
4
14
CD-ES222E
03/10/29
CD-ES222E(UK).fm
TINSEA002SJZZ
CD Playb
ack
Listening to a CD (CDs) (continued)
To interrupt playback:
Press the button on the remote control.
To resume playback from the same point, press the button.
Press the button on the remote control.
To resume playback from the same point, press the button.
To stop playback:
Press the button.
Press the button.
To remove the CDs:
Whilst in the stop mode, press the OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the DISC
SKIP button to rotate the disc tray and remove the remaining disc.
Whilst in the stop mode, press the OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the DISC
SKIP button to rotate the disc tray and remove the remaining disc.
Caution:
z
Do not place two CDs in one disc tray.
z
Do not play discs with special shapes (heart- or octagon-shaped).
This may cause malfunction of the CD player.
This may cause malfunction of the CD player.
z
Do not push the disc tray whilst it is moving.
z
Do not turn the disc tray by hand. This may cause malfunctions.
z
If the power fails whilst the tray is open, wait until the power is re-
stored.
stored.
z
If the disc tray is stopped with force, the unit will not function. If this
occurs, press the ON/STAND-BY button to enter the power stand-
by mode and then turn the power on again.
occurs, press the ON/STAND-BY button to enter the power stand-
by mode and then turn the power on again.
z
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
unit away from the TV or radio.
z
If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play back.
skip or not play back.
To locate the beginning of a track
Notes:
z
You can locate the beginning of a track on one disc only.
z
You can skip to any track by pressing the
or
button
repeatedly until the desired track number appears.
To locate the desired portion
Notes:
z
Normal playback will resume when the
or
button is
released.
z
You can locate the desired portion on one disc only.
z
When the end of the last track is reached during fast forward,
"END" will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast re-
verse, the unit will enter the playback mode.
"END" will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast re-
verse, the unit will enter the playback mode.
Pause indicator
To move to the beginning of the next track:
Press the
button for less than 0.5 seconds during playback.
To restart the track being played:
Press the
button for less than 0.5 seconds during playback.
For audible fast forward:
Press and hold down the
button during playback.
For audible fast reverse:
Press and hold down the
button during playback.
15
CD-ES222E
03/10/29
CD-ES222E(UK).fm
TINSEA002SJZZ
CD Playb
ack
Advanced CD playback
Starting playback with a desired track
You can play a disc starting with the desired track.
Notes:
z
When the DISC SKIP button is pressed during playback, the next
disc will begin automatically.
disc will begin automatically.
z
When one of the 1 - 3 buttons on the remote control is pressed
during playback, the selected disc will begin automatically.
during playback, the selected disc will begin automatically.
Random play
The tracks on the disc(s) can be played in random order automatically.
To cancel random play:
Press the button.
Press the button.
Notes:
z
The random play will stop automatically when all tracks are
played once. (The same track will not be played back twice.)
played once. (The same track will not be played back twice.)
z
If you press the
button during random play, you can move
to the track selected next by the random operation. On the other
hand, the
hand, the
button does not allow you to move to the previ-
ous track. The beginning of the track being played will be located.
z
In random play, the CD player will select and play tracks automat-
ically. (You cannot select the order of the tracks.)
ically. (You cannot select the order of the tracks.)
Repeat play
All tracks on up to 3 discs, or a programmed sequence can be con-
tinuously repeated.
tinuously repeated.
To cancel repeat play:
Press the / button again. " " will go out.
Press the / button again. " " will go out.
Caution:
After performing repeat play, be sure to press the button. Other-
wise, the disc(s) will play continuously.
After performing repeat play, be sure to press the button. Other-
wise, the disc(s) will play continuously.
1
Whilst in the stop mode, press one of the 1 - 3 buttons
on the remote control or DISC SKIP button to select the de-
sired disc.
on the remote control or DISC SKIP button to select the de-
sired disc.
2
Press the
or
button to select the desired
track.
Selected disc number
Selected track number
3
Press the / button to start playback.
Playback of the selected track is started. When the end of the
last track is reached, the next disc will automatically be started.
Playback of the selected track is started. When the end of the
last track is reached, the next disc will automatically be started.
Press the RANDOM button on the remote control to begin ran-
dom play.
dom play.
To repeat all tracks on up to 3 discs:
Press the / button twice.
To repeat a desired track:
Perform steps 1 - 4 in the "Programmed play" section on page 16
and then press the / button twice.
and then press the / button twice.
To repeat random play:
Press the / button during random play.
4
16
CD-ES222E
03/10/29
CD-ES222E(UK).fm
TINSEA002SJZZ
CD Playb
ack
Advanced CD playback (continued)
Programmed play
You can choose up to 32 selections for playback in the order you like.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indica-
tor will be displayed. Then follow steps 1 - 3 to add tracks. The new
tracks will be stored after the last track of the original programme.
If a programme has been previously stored, the "MEMORY" indica-
tor will be displayed. Then follow steps 1 - 3 to add tracks. The new
tracks will be stored after the last track of the original programme.
Notes:
z
Opening the disc tray automatically cancels the programmed
sequence.
sequence.
z
Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the pro-
grammed selections will not be cleared.
mode or change the function from CD to another, the pro-
grammed selections will not be cleared.
z
During programme operation, random play is not possible.
Care of compact discs
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collec-
tion and player.
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collec-
tion and player.
z
Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
side from which signals are read. Do not mark this surface.
z
Keep your discs away from direct sunlight, heat, and excessive
moisture.
moisture.
z
Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
1
Whilst in the stop mode, press
one of the 1 - 3 buttons on
the remote control to select
the desired disc.
one of the 1 - 3 buttons on
the remote control to select
the desired disc.
Selected disc number
2
Press the
or
but-
ton to select the desired track.
Selected track number
3
Press the MEMORY/SET (MEMORY) button to save the
track number.
track number.
Playback order
When the track is memorised, "MEMORY" will appear.
4
Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be
programmed.
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR button.
by pressing the CLEAR button.
5
Press the / button to start playback.
To clear the programmed selections:
Whilst the "MEMORY" indicator is lit, set the
CD to the stop mode and then press the
CLEAR button.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed. When all the tracks are cleared,
"MEMORY" will disappear.
Whilst the "MEMORY" indicator is lit, set the
CD to the stop mode and then press the
CLEAR button.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed. When all the tracks are cleared,
"MEMORY" will disappear.
NO
YES
Correct
Correct
Click on the first or last page to see other CD-ES222E service manuals if exist.