Sharp CD-E700H User Manual / Operation Manual ▷ View online
02/12/6
CD-E700H(H)E2.fm
E-14
ENGLISH
8
CD-E700H
CD P
layback
"
Programmed play
You can choose up to 32 selections for playback in the order you
like.
like.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indica-
tor will be displayed. Then follow steps 1 - 3 to add tracks. The new
tracks will be stored after the last track of the original programme.
If a programme has been previously stored, the "MEMORY" indica-
tor will be displayed. Then follow steps 1 - 3 to add tracks. The new
tracks will be stored after the last track of the original programme.
Notes:
!
Opening the disc tray automatically cancels the programmed
sequence.
sequence.
!
Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the pro-
grammed selections will not be cleared.
mode or change the function from CD to another, the pro-
grammed selections will not be cleared.
!
During programme operation, random play is not possible.
1
Whilst in the stop mode, press
one of the 1 - 3 buttons on
the remote control to select
the desired disc.
one of the 1 - 3 buttons on
the remote control to select
the desired disc.
Selected disc number
2
Press the direct search but-
tons on the remote control to
select the desired track.
tons on the remote control to
select the desired track.
Selected track number
You can also select a track by pressing the
or
button.
3
Press the MEMORY/SET (MEMORY) button to save the
track number.
track number.
Playback order
When the track is memorised, "MEMORY" will appear.
4
Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be
programmed.
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR button.
by pressing the CLEAR button.
5
Press the / button to start playback.
To clear the programmed selections:
Whilst the "MEMORY" indicator is lit, set the
CD to the stop mode and then press the
CLEAR button.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed. When all the tracks are cleared,
"MEMORY" will disappear.
Whilst the "MEMORY" indicator is lit, set the
CD to the stop mode and then press the
CLEAR button.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed. When all the tracks are cleared,
"MEMORY" will disappear.
02/12/6
CD-E700H(H)E2.fm
E-15
ENGLISH
CD-E700H
Radio
Listening to the radio
"
Tuning
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
Press the TUNER (BAND) button to display the "ST" indicator.
!
" " will appear when an FM broadcast is in stereo.
!
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monau-
ral, and the sound becomes clearer.
extinguish the "ST" indicator. The reception changes to monau-
ral, and the sound becomes clearer.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
desired frequency band (FM or AM).
3
Press the TUNING/TIME ( or ) button to tune in to the de-
sired station.
Manual tuning:
Press the TUNING/TIME button as many times as required to
tune in to the desired station.
Auto tuning:
When the TUNING/TIME button is pressed for more than 0.5
seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
sired station.
Manual tuning:
Press the TUNING/TIME button as many times as required to
tune in to the desired station.
Auto tuning:
When the TUNING/TIME button is pressed for more than 0.5
seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
Notes:
!
When radio interference occurs, auto scan tuning may stop
automatically at that point.
automatically at that point.
!
Auto scan tuning will skip weak signal stations.
!
To stop the auto tuning, press the TUNING/TIME button
again.
again.
!
When an RDS (Radio Data System) station is tuned in, the
frequency will be displayed first, and then the RDS indicator
will light. Finally, the station name will appear.
frequency will be displayed first, and then the RDS indicator
will light. Finally, the station name will appear.
!
Full auto tuning can be achieved for RDS stations "ASPM",
see page 22.
see page 22.
FM stereo mode indicator
FM stereo receiving indicator
02/12/6
CD-E700H(H)E2.fm
E-16
ENGLISH
8
CD-E700H
Radio
!
Memorising a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
the push of a button. (Preset tuning)
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or if the AC lead is discon-
nected.
The backup function protects the memorised stations for a few
hours should there be a power failure or if the AC lead is discon-
nected.
!
To recall a memorised station
Press the PRESET ( or ) button for less than 0.5 seconds to
select the desired station.
This can be operated by pressing the TUNER PRESET ( or )
button on the remote control.
select the desired station.
This can be operated by pressing the TUNER PRESET ( or )
button on the remote control.
!
To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
set memory scan)
!
To erase entire preset memory
1
Perform steps 1 - 3 in "Tuning" on page 15.
2
Press the MEMORY/SET button to enter the preset tuning
saving mode.
saving mode.
3
Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
channel 1.
4
Within 30 seconds, press the MEMORY/SET button to store
that station in memory.
that station in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
the station is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
set station.
When a new station is stored in memory, the station previously
memorised will be erased.
memorised will be erased.
1
Press the PRESET ( or ) button for more than 0.5 seconds.
"
The preset number will flash and the programmed stations will
be tuned in sequentially, for 5 seconds each.
be tuned in sequentially, for 5 seconds each.
"
This can be operated by pressing the TUNER PRESET ( or
) button on the remote control.
2
Press the PRESET ( or ) button again when the desired sta-
tion is located.
tion is located.
1
Press the ON/STAND-BY button to enter the stand-by mode.
2
Whilst pressing down the TUNER (BAND) button and the X-
BASS/DEMO button, press the ON/STAND-BY button until
"TUNER CL" appears.
BASS/DEMO button, press the ON/STAND-BY button until
"TUNER CL" appears.
02/12/6
CD-E700H(H)E2.fm
E-17
ENGLISH
CD-E700H
Tape Playbac
k
Listening to a cassette tape (TAPE 1 or TAPE 2)
Before playback:
Playback is possible in the TAPE 1 compartment as well as the
TAPE 2 compartment.
TAPE 2 compartment.
To stop playback:
Press the button.
Press the button.
Fast forward/rewind: (TAPE 2 only)
Caution:
"
To remove the cassette, press the button, and then open the
compartment.
compartment.
"
Before changing from one tape operation to another, press the
button.
button.
"
If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not
open. In this case, wait until the power is restored.
remain engaged with the tape and the cassette door will not
open. In this case, wait until the power is restored.
"
For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not rec-
ommended.)
the best sound. (Metal or CrO tapes are not rec-
ommended.)
"
Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
they may cause malfunctions.
"
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
tighten the slack with a pen or a pencil.
1
Press the ON/STAND-BY button to turn the power on.
2
Open the cassette door by pushing the area marked "PUSH
EJECT ".
EJECT ".
3
Load a cassette into the TAPE 1
compartment or TAPE 2 compart-
ment with the side to be played
facing toward you.
compartment or TAPE 2 compart-
ment with the side to be played
facing toward you.
4
Press the TAPE (1 2) button to select the cassette you
want to listen to.
want to listen to.
5
Press the / button to start playback.
1
Press the button, then press the TAPE (1 2) button to select
TAPE 2.
TAPE 2.
2
To advance the tape, press the
button. To rewind it, press the
button.
TAPE 1
TAPE 2
Click on the first or last page to see other CD-E700H service manuals if exist.