Sharp CD-E700H User Manual / Operation Manual ▷ View online
02/12/6
CD-E700H(H)E1.fm
E-10
ENGLISH
8
CD-E700H
Basic
Operati
o
n
Setting the clock
In this example, the clock is set for the 24-hour (0:00) display.
To confirm the time display:
Note:
The "CLOCK" or time will flash at the push of the CLOCK button
when the AC power supply is restored after a power failure or
unplugging the unit.
Readjust the clock as follows.
The "CLOCK" or time will flash at the push of the CLOCK button
when the AC power supply is restored after a power failure or
unplugging the unit.
Readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" is not flash-
ing in step 2, step 3 (for selecting the 24-hour or 12-hour display)
will be skipped.
Perform "Setting the clock" from step 1. If the "CLOCK" is not flash-
ing in step 2, step 3 (for selecting the 24-hour or 12-hour display)
will be skipped.
To change the 24-hour or 12-hour display:
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK button and within 5 seconds, press the
MEMORY/SET button.
MEMORY/SET button.
3
Press the TUNING/TIME ( or ) button to select 24-hour or
12-hour display and then press the MEMORY/SET button.
12-hour display and then press the MEMORY/SET button.
"0:00"
The 24-hour display will appear.
(0:00 - 23:59)
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
"AM 0:00"
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
Note that this can only be set when the unit is first installed or it
has been reset. [Refer to "Clearing all the memory (reset)" on
page 30 for details.]
has been reset. [Refer to "Clearing all the memory (reset)" on
page 30 for details.]
4
Press the TUNING/TIME ( or ) button to adjust the hour
and then press the MEMORY/SET button.
and then press the MEMORY/SET button.
"
Press the TUNING/TIME ( or ) button once to advance
the time by 1 hour. Hold it down to advance continuously.
the time by 1 hour. Hold it down to advance continuously.
"
When the 12-hour display is selected, "AM" will change au-
tomatically to "PM".
tomatically to "PM".
5
Press the TUNING/TIME ( or ) button to adjust the min-
utes and then press the MEMORY/SET button.
utes and then press the MEMORY/SET button.
"
Press the TUNING/TIME ( or ) button once to advance
the time by 1 minute. Hold it down to change the time in 5-
minute intervals.
the time by 1 minute. Hold it down to change the time in 5-
minute intervals.
"
The hour will not advance even if minutes advance from "59"
to "00".
to "00".
Press the CLOCK button.
The time display will appear for about 5
seconds.
The time display will appear for about 5
seconds.
1
Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 30 for details.]
memory (reset)" on page 30 for details.]
2
Perform "Setting the clock" from step 1.
02/12/6
CD-E700H(H)E2.fm
E-11
ENGLISH
CD-E700H
CD P
layback
Listening to a CD (CDs)
This system can also play audio CD-R and CD-RW discs, but can-
not record.
Some audio CD-R and CD-RW discs may not be playable due to the
state of disc or the device that was used for recording.
not record.
Some audio CD-R and CD-RW discs may not be playable due to the
state of disc or the device that was used for recording.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the OPEN/CLOSE button to open the disc tray.
4
Place the CD(s) on the disc tray, label side up.
When loading a third disc, press the DISC SKIP button to
turn the disc tray, then place the CD in the open position.
turn the disc tray, then place the CD in the open position.
!
CDs can be placed on any open position on the disc tray.
!
Be sure to place 8 cm (3") CDs in the middle of the disc po-
sitions.
sitions.
5
Press the OPEN/CLOSE button to close the disc tray.
Total number of tracks on
the CD whose number is
flashing
the CD whose number is
flashing
Total playing time of the CD
whose number is flashing
whose number is flashing
6
To select the CD you want to listen to first, press one of the
1 - 3 buttons on the remote control.
7
Press the / button to start playback.
!
Playback will begin from track 1 on the disc you have select-
ed to play. After that disc finishes playing, the next disc will
automatically start playback.
ed to play. After that disc finishes playing, the next disc will
automatically start playback.
!
When the last track on the third disc has finished playing, the
CD player will automatically stop.
CD player will automatically stop.
!
When there is no CD in one of the disc 1 - 3 positions, that
position will be skipped and the next CD will begin to play.
position will be skipped and the next CD will begin to play.
12 cm (5") 8 cm (3")
02/12/6
CD-E700H(H)E2.fm
E-12
ENGLISH
8
CD-E700H
CD P
layback
To interrupt playback:
Press the CD button on the remote control.
To resume playback from the same point, press the button.
Press the CD button on the remote control.
To resume playback from the same point, press the button.
To stop playback:
Press the button.
Press the button.
To remove the CDs:
Whilst in the stop mode, press the OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the
DISC SKIP button to rotate the disc tray and remove the remaining
disc.
Whilst in the stop mode, press the OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the
DISC SKIP button to rotate the disc tray and remove the remaining
disc.
Caution:
!
Do not place two CDs in one disc tray.
!
Do not play discs with special shapes (heart- or octagon-
shaped). It may cause malfunctions.
shaped). It may cause malfunctions.
!
Do not push the disc tray whilst it is moving.
!
Do not turn the disc tray by hand. This may cause malfunctions.
!
If the power fails whilst the tray is open, wait until the power is
restored.
restored.
!
If the disc tray is stopped with force, "ER-CD10" will appear on
the display for 3 seconds and the unit will not function. If this
occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.
the display for 3 seconds and the unit will not function. If this
occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.
!
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
unit away from the TV or radio.
!
If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play back.
skip or not play back.
"
To locate the beginning of a track
Notes:
!
You can locate the beginning of a track on a single disc only.
!
You can skip to any track by pressing the
or
button
repeatedly until the desired track number appears.
"
To locate the desired portion
Notes:
!
Normal playback will resume when the
or
button is
released.
!
You can locate the desired portion on a single disc only.
!
When the end of the last track is reached during fast forward,
"END" will appear on the display and CD operation will be
paused. When the beginning of the first track is reached during
fast reverse, the unit will enter the playback mode.
"END" will appear on the display and CD operation will be
paused. When the beginning of the first track is reached during
fast reverse, the unit will enter the playback mode.
To move to the beginning of the next track:
Press the
button for less than 0.5 seconds during playback.
To restart the track being played:
Press the
button for less than 0.5 seconds during playback.
For audible fast forward:
Press and hold down the
button during playback.
For audible fast reverse:
Press and hold down the
button during playback.
02/12/6
CD-E700H(H)E2.fm
E-13
ENGLISH
CD-E700H
CD P
layback
Advanced CD playback
"
Direct search of the track
By using the direct search buttons, the desired tracks can be played.
To stop playback:
Press the button.
Press the button.
Notes:
!
The selected track can be started simply by pressing the direct
search buttons during playback. (It is not necessary to press the
search buttons during playback. (It is not necessary to press the
/ button.)
!
A track number higher than the number of tracks on the disc can-
not be selected.
not be selected.
!
During random play, direct search is not possible.
"
Repeat play
All tracks on up to 3 discs, or a programmed sequence can be con-
tinuously repeated.
tinuously repeated.
To cancel repeat play:
Press the / button again. " " will go out.
Press the / button again. " " will go out.
"
Random play
The tracks on the disc(s) can be played in random order automatically.
To cancel random play:
Press the button.
Press the button.
Notes:
!
If you press the
button during random play, you can move
to the track selected next by the random operation. On the other
hand, the
hand, the
button does not allow you to move to the previ-
ous track. The beginning of the track being played will be located.
!
In random play, the CD player will select and play tracks auto-
matically. (You cannot select the order of the tracks.)
matically. (You cannot select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the but-
ton. Otherwise, the disc(s) will play continuously.
After performing repeat or random play, be sure to press the but-
ton. Otherwise, the disc(s) will play continuously.
1
Whilst in the stop mode, press one of the 1 - 3 buttons
on the remote control or DISC SKIP button to select the de-
sired disc.
on the remote control or DISC SKIP button to select the de-
sired disc.
2
Use the direct search buttons
on the remote control to select
the desired track.
on the remote control to select
the desired track.
Selected track number
!
The direct search buttons allow you to select up to number 9.
!
When selecting number 10 or more, use the "+10" button.
A. For example, to choose 13
1 Press the "+10" button once.
2 Press the "3" button.
B. For example, to choose 30
1 Press the "+10" button three times.
2 Press the "0" button.
1 Press the "+10" button three times.
2 Press the "0" button.
3
Press the / button to start playback.
Playback of the selected track is started. When the end of last
track of the disc selected is reached, the next disc will be auto-
matically started.
track of the disc selected is reached, the next disc will be auto-
matically started.
To repeat all tracks on up to 3 discs:
Press the / button twice.
Press the / button twice.
To repeat a desired track:
Perform steps 1 - 4 in the "Programmed play" section on page 14
and then press the / button twice.
Perform steps 1 - 4 in the "Programmed play" section on page 14
and then press the / button twice.
Press the RANDOM button on the remote control to begin ran-
dom play.
dom play.
Click on the first or last page to see other CD-E700H service manuals if exist.