DOWNLOAD Sony DSC-M1 (serv.man2) Service Manual ↓ Size: 5.67 MB | Pages: 51 in PDF or view online for FREE

Model
DSC-M1 (serv.man2)
Pages
51
Size
5.67 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / LEVEL 2
File
dsc-m1-sm2.pdf
Date

Sony DSC-M1 (serv.man2) Service Manual ▷ View online

SERVICE MANUAL
DIGITAL STILL CAMERA
LEVEL
 
2
Link
SERVICE NOTE
DISASSEMBLY
BLOCK DIAGRAMS
FRAME SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SPECIFICATIONS
SERVICE NOTE
DISASSEMBLY
BLOCK DIAGRAMS
FRAME SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SPECIFICATIONS
Link
Revision History
Revision History
Ver 1.3  2005. 12
On the FP-035 FLEXIBLE, LD-175 and SY-114 board
This service manual provides the information that is premised the circuit board replacement service and not intended repair
inside the FP-035 FLEXIBLE, LD-175 and SY-114 board.
Therefore, schematic diagram, printed wiring board, waveforms, mounted parts location and electrical parts list of the FP-035
FLEXIBLE, LD-175 and SY-114 board are not shown.
The following pages are not shown.
Mounted parts location ............................. Page 4-64
Electrical parts list ................................... Pages 5-12 to 5-16
How to use
Acrobat Reader
How to use
Acrobat Reader
Schematic diagram ............................. Pages 4-25 to 4-46
Printed wiring board ............................ Pages 4-55 to 4-60
Waveforms ........................................... Page 4-62
Sony EMCS Co.
9-876-778-31
DSC-M1
DSC-M1
DSC-M1
US Model
Canadian Model
Australian Model
Chinese Model
E Model
Tourist Model
Hong Kong Model
Korea Model
Japanese Model
• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (9-876-778-51).
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (9-876-778-41).
• Reference number search on printed wiring boards is available.
2005L1600-1
  ©2005.12
Published by DI Technical Support Department
— 2 —
DSC-M1
SPECIFICATIONS
Camera
[System]
Image device
7.66 mm (1/2.4 type) color CCD
Primary color filter
Total pixels number of camera
Approx. 5 255 000 pixels
Effective pixels number of camera
Approx. 5 090 000 pixels
Lens
Carl Zeiss Vario-Tessar
3  zoom lens
f = 6.7 – 20.1 mm (38 – 114 mm
 when 
converted to a 35 mm still camera)
F3.5 – 4.4
Exposure control
Automatic exposure, Scene
 selection 
(9 modes)
White balance
Automatic, Daylight, Cloudy, 
Fluorescent, Incandescent, Flash
File format (DCF compliant)
Still images: Exif Ver. 2.2 JPEG 
compliant, DPOF compatible
Movies: MPEG4 compli
ant (Stereo)
Recording media
“Memory Stick Duo”
Flash
Recommended distance (ISO set to
 
Auto): 
0.3 m to 1.8 m (11 7/8 inches to 
70 7/8 inches) (W)
0.5 m to 1.7 m (19 3/4 inches to 
67 inches) (T)
[Input and Output connectors]
Multi connector
USB communication
Hi-Speed USB (USB 2.0 compli
ant)
[LCD screen]
LCD panel
6.2 cm (2.5 type) TFT drive
Total number of dots
123 200 (560
×
220) dots
[Power, general]
Used battery pack
NP-FT1
Power requirements
3.6 V
Power consumption (during normal 
shooting)
1.4 W
Operating temperature
0
°
C to +40
°
C (+32
°
F to +104
°
F)
Storage temperature
–20
°
C to +60
°
C (–4
°
F to +140
°
F)
Dimensions
51.0
×
114.0
×
27.8 mm 
(2 1/8
×
4 5/8
×
1 1/8 inches) 
(W/H/D, excluding maximum 
protrusions)
Mass
Approx. 220 g (8 oz) (including 
battery pack NP-FT1, “Memory Stick 
Duo” and wrist strap)
Microphone
Electret condenser microphone
Speaker
Piezoelectric speaker
Exif Print Compatible
PRINT Image Matching II
Compatible
PictBridge
Compatible
UC-MA Cyber-shot Station
[Input and Output connectors]
A/V OUT (STEREO) jack (Stereo)
Minijack
Video: 1 Vp-p, 75 
, unbalanced,
sync negative
Audio: 327 mV (at a 47 k
 load)
Output impedance 1 k
USB jack B
USB connection
High-Speed USB
(USB 2.0 High-Speed compatible)
DC IN jack
Camera connector
AC-LM5/LM5A AC Adaptor
Input rating
100 V to 240 V AC,
50/60 Hz
AC-LM5
10 W
AC-LM5A
11 W
Output rating
4.2 V DC, 1.5 A
Operating temperature
0
°
C to +40
°
C (+32
°
F to +104
°
F)
Storage temperature
–20
°
C to +60
°
C (–4
°
F to +140
°
F)
Dimensions
AC-LM5
Approx. 47
×
30
×
80 mm
(1 7/8
×
1 3/16
×
3 1/4 inches)
AC-LM5A
Approx. 48
×
29
×
81 mm
(1 15/16
×
1 3/16
×
3 1/4 inches)
(W/H/D, excluding projecting parts)
Mass
AC-LM5
Approx. 170 g (6.0 oz)
AC-LM5A
Approx. 160 g (5.6 oz)
excluding power cord (mains lead)
NP-FT1 battery pack 
Used battery 
Lithium-ion battery 
Maximum voltage 
DC 4.2 V 
Nominal voltage 
DC 3.6 V
Capacity 2.4 Wh (680 mAh)
Accessories
  AC-LM5/LM5A AC Adaptor (1) 
  Power cord (mains lead) (1)
  Cyber-shot Station UC-MA (1)
  NP-FT1 battery pack (1)
  Battery case (1)
  USB cable (1)
  A/V connecting cable (1)
 Wrist 
strap 
(1)
  “Memory Stick Duo” (32 MB) (1)
  Memory Stick Duo Adaptor (1)
  CD-ROM (USB driver SPVD-012) (1)
 Operating 
instructions 
(1)
Design and specifications are subject to change 
without notice.
— 3 —
DSC-M1
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
 : LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
°
C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°
C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 
0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
— 4 —
DSC-M1
TABLE OF CONTENTS
1.
SERVICE NOTE
........................................................ 1-1
2.
DISASSEMBLY
2-1.
DISASSEMBLY ······························································ 2-1
2-2.
SERVICE POSITION ····················································· 2-7
2-3.
CIRCUIT BOARDS LOCATION ································· 2-10
2-4.
FLEXIBLE BOARDS LOCATION ······························ 2-11
HELP (List of caution points is shown here.)
3.
BLOCK DIAGRAMS
3-1.
OVERALL BLOCK DIAGRAM (1/2) ··························· 3-1
3-2.
OVERALL BLOCK DIAGRAM (2/2) ··························· 3-3
3-3.
POWER BLOCK DIAGRAM (1/2) ································ 3-5
3-4.
POWER BLOCK DIAGRAM (2/2) ································ 3-7
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-1.
FRAME SCHEMATIC DIAGRAM ································ 4-1
4-2.
SCHEMATIC DIAGRAMS
• FLASH UNIT (FL80000) (FLASH)
SCHEMATIC DIAGRAM ······························ 4-5
• FP-036 FLEXIBLE (MULTI CONNECTOR)
SCHEMATIC DIAGRAM ······························ 4-7
• FP-037 FLEXIBLE (CCD IMAGER)
SCHEMATIC DIAGRAM ······························ 4-9
• FP-039 FLEXIBLE (BATTERY)
SCHEMATIC DIAGRAM ···························· 4-11
• FP-040 FLEXIBLE (LITHIUM BATTERY)
SCHEMATIC DIAGRAM ···························· 4-12
• MS-252 (MS I/O, CONNECTOR)
SCHEMATIC DIAGRAM ···························· 4-13
• FP-038 FLEXIBLE (RELAY)
SCHEMATIC DIAGRAM ···························· 4-13
• FP-041 FLEXIBLE (LCD O/T SWITCH)
SCHEMATIC DIAGRAM ···························· 4-13
• CONTROL SWITCH BLOCK (PB80000)
SCHEMATIC DIAGRAM ···························· 4-15
• MOTOR UNIT (PI (SENSOR) BOARD) (PI SENSOR)
SCHEMATIC DIAGRAM ···························· 4-16
• PM-045 (1/2) (LCD PANEL DRIVE)
SCHEMATIC DIAGRAM ···························· 4-17
• PM-045 (2/2) (MIC AMP)
SCHEMATIC DIAGRAM ···························· 4-19
• CONTROL SWITCH BLOCK (PW80000) (1/2)
(FUNCTION KEY)
SCHEMATIC DIAGRAM ···························· 4-21
• CONTROL SWITCH BLOCK (PW80000) (2/2)
(CONNECTOR)
SCHEMATIC DIAGRAM ···························· 4-23
Shematic diagram of the FP-035, LD-175 and SY-114
board are not shown.
Pages from 4-25 to 4-46 are not shown.
4-3.
PRINTED WIRING BOARDS
• FP-036 FLEXIBLE (MULTI CONNECTOR)
PRINTED WIRING BOARD ······················· 4-49
• FP-037 FLEXIBLE (CCD IMAGER)
PRINTED WIRING BOARD ······················· 4-49
• FP-038 FLEXIBLE (RELAY)
PRINTED WIRING BOARD ······················· 4-50
• FP-041 FLEXIBLE (LCD O/T SWITCH)
PRINTED WIRING BOARD ······················· 4-50
• MS-252 (MS I/O, CONNECTOR)
PRINTED WIRING BOARD ······················· 4-51
• FP-040 FLEXIBLE (LITHIUM BATTERY)
PRINTED WIRING BOARD ······················· 4-51
• PM-045 (LCD PANEL DRIVE, MIC AMP)
RINTED WIRING BOARD ························· 4-53
Printed wiring board of the FP-035, LD-175 and
SY-114 board are not shown.
Pages from 4-55 to 4-60 are not shown.
4-4.
WAVEFORMS ······························································ 4-61
Waveforms of the SY-114 board are not shown.
Page 4-62 is not shown.
4-5.
MOUNTED PARTS LOCATION ································· 4-63
Mounted parts location of the SY-114 board is not
shown.
Page 4-64 is not shown.
5.
REPAIR PARTS LIST
5-1.
EXPLODED VIEWS ······················································ 5-1
5-1-1. OVERALL SECTION ····················································· 5-3
5-1-2. BATTERY HOLDER SECTION ···································· 5-4
5-1-3. LCD SECTION-1 ···························································· 5-5
5-1-4. LCD SECTION-2 ···························································· 5-6
5-1-5. LENS SECTION ····························································· 5-7
5-2.
ELECTRICAL PARTS LIST ·········································· 5-9
Electrical parts list of the FP-035, LD-175 and SY-114
board are not shown.
Pages from 12 to 5-16 are not shown.
Page of 51
Display

Sony DSC-M1 (serv.man2) Service Manual ▷ Download

  • DOWNLOAD Sony DSC-M1 (serv.man2) Service Manual ↓ Size: 5.67 MB | Pages: 51 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony DSC-M1 (serv.man2) in PDF for free, which will help you to disassemble, recover, fix and repair Sony DSC-M1 (serv.man2) Digital Camera. Information contained in Sony DSC-M1 (serv.man2) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.