Sharp CD-DP900 (serv.man29) Service Manual / Technical Bulletin ▷ View online
AUD2003 02 04
Month of Issue: February 2003
Classification:
White
AUDIO TECHNICAL BULLETIN
Page 1 of 1
Sharp Electronics (UK) Limited
Reference EAA1202
Revision 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
MODELS
CDDP900H
CDXP200H
CDXP250H
CDXP300H
CDXP500H
CDXP700H
SYMPTOM
Damage to the CD changer mechanism while being transported.
ACTION
Before transporting the unit, the CD changer mechanism need to be put into the
lock position. To put the CD changer mechanism into the lock position, follow the
procedure outlined below:
lock position. To put the CD changer mechanism into the lock position, follow the
procedure outlined below:
1. Put the unit into the stand-by mode.
2. While holding down the CLOCK and X-BASS/DEMO buttons, press the ON/
2. While holding down the CLOCK and X-BASS/DEMO buttons, press the ON/
STAND-BY button until "CLEAR AL" appears on the display
3. Release the CLOCK and X-BASS/DEMO buttons
4. While holding down the TUNING DOWN▼button and the XBASS/DEMO
4. While holding down the TUNING DOWN▼button and the XBASS/DEMO
buttons press the ON/STAND-BY button until "WAIT" then "FINISHED" appears
in the display
in the display
5. Release the buttons and unplug the unit from the AC supply
6. Unit is now ready for transport
6. Unit is now ready for transport
Display