DOWNLOAD Sharp CD-DP900 (serv.man4) Service Manual ↓ Size: 110.09 KB | Pages: 2 in PDF or view online for FREE

Model
CD-DP900 (serv.man4)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
110.09 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Audio / System / Basic operation
File
cd-dp900-sm4.pdf
Date

Sharp CD-DP900 (serv.man4) User Manual / Operation Manual ▷ View online

14
CD-DP900E(UK)_1.fm
02/1/10
CD-DP900E
B
asic Ope
ration
- Sound c
ontr
o
l -
Sound control
 
Volume control
Press the VOLUME (  or  ) button to increase or decrease the volume.
Extra bass (X-BASS)/Pre-programmed 
equaliser
(Main unit operation)
You can select the extra bass and pre-programmed equaliser modes with the same
button on the main unit.
Changing the mode:
When the EQUALIZER/X-BASS/DEMO button is pressed, the current mode setting
will be displayed. To change to a different mode, press the EQUALIZER/X-BASS/
DEMO button repeatedly until the desired sound mode appears.
 
(Remote control operation)
To enter or cancel the extra bass mode:
When the power is first turned on, the unit will enter the extra bass mode which
emphasises the bass frequencies, and "X-BASS" will appear. To cancel the extra
bass mode, press the X-BASS button.
Selecting a pre-programmed equaliser mode:
When the EQUALIZER MODE button is pressed, the current mode setting will be dis-
played. To change to a different mode, press the EQUALIZER MODE button repeat-
edly until the desired sound mode appears.
Note:
If the EQUALIZER MODE button on the remote control is pressed in the extra bass
mode, it will be cancelled automatically.
0
1
2
29
30 MAXIMUM
.....
The sound is not modified.
Bass frequencies are emphasised.
Bass and treble are emphasised.
Bass and treble are slightly emphasised.
Treble is cut a little.
Treble is reduced a lot.
Vocals (midrange tones) are emphasised.
ROCK (X-BASS off)
X-BASS (X-BASS on)
FLAT (X-BASS off)
CLASSIC (X-BASS off)
POPS (X-BASS off)
JAZZ (X-BASS off)
VOCAL (X-BASS off)
FLAT
ROCK
POPS
JAZZ
CLASSIC
VOCAL
15
CD-DP900E(UK)_1.fm
02/1/10
CD-DP900E
B
asic Ope
ration
S
e
tting the
 c
loc
k
 -
Setting the clock
In this example, the clock is set for the 24-hour (0:00) display.
Note:
To readjust the clock:
Perform "Setting the clock" from step 1. If the time display is flashing, step 3 (for
selecting the 24-hour or 12-hour display) will be skipped.
To change the 24-hour or 12-hour display:
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK button and within 5 seconds, press the MEMO-
RY/SET button.
3
Press the TUNING/TIME (  or  ) button to select 24-hour or 12-
hour display and then press the MEMORY/SET button.
"0:00"
The 24-hour display will appear.
 (0:00 
23:59)
"AM 12:00"
The 12-hour display will appear.
 
(AM 12:00 - PM 11:59)
"AM 0:00"
The 12-hour display will appear.
 
(AM 0:00 - PM 11:59)
Note that this can only be set when the unit is first installed or it has been reset. 
[Refer to "Clearing all the memory (reset)" on page 29 for details.]
4
Press the TUNING/TIME (  or  ) button to adjust the hour and then
press the MEMORY/SET button.
Press the TUNING/TIME (  or  ) button once to advance the time by 1 hour. 
Hold it down to advance continuously.
When the 12-hour display is selected, "AM" will change automatically to "PM".
5
Press the TUNING/TIME (  or  ) button to adjust the minutes and
then press the MEMORY/SET button.
Press the TUNING/TIME (  or  ) button once to advance the time by 1 
minute. Hold it down to change the time in 5-minute intervals.
The hour will not advance even if minutes advance from "59" to "00".
The clock begins counting from "0" seconds. (Seconds are not displayed.) 
The time display will disappear after a few seconds.
To confirm the time display:
Press the CLOCK button.
The time display will appear for about 5 seconds.
1
Clear all the programmed contents. [Refer to "Clearing all the memory (reset)" on 
page 29 for details.] 
2
Perform "Setting the Clock" from step 1.
Display

Sharp CD-DP900 (serv.man4) User Manual / Operation Manual ▷ Download

  • DOWNLOAD Sharp CD-DP900 (serv.man4) Service Manual ↓ Size: 110.09 KB | Pages: 2 in PDF or view online for FREE
  • Here you can View online or download the User Manual / Operation Manual for the Sharp CD-DP900 (serv.man4) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp CD-DP900 (serv.man4) System. Information contained in Sharp CD-DP900 (serv.man4) User Manual / Operation Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.