Sharp CD-CH1000 User Manual / Operation Manual ▷ View online
17
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
7
Press the
06
06
06
06
06
button to start playback.
●
Playback will begin from track 1 on the DISC 1.
After that disc finishes playing, the next disc will automatically play.
After that disc finishes playing, the next disc will automatically play.
●
When there is no CD in one of the disc tray 1 - 6 positions, that position will
be skipped and the next CD will be played.
be skipped and the next CD will be played.
●
When the last track on the DISC 6 has finished playing, the CD player will
stop automatically.
stop automatically.
To interrupt playback:
Press the
06
button.
To resume playback from the same point, press the
06
button again.
To stop playback:
Press the
■
button.
To exchange other CDs whilst playing a disc:
Press the
7
button for the stopped disc and exchange discs.
To remove the CDs:
Whilst in the stop mode, press the desired
7
button.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Caution:
●
Do not place two CDs in one disc tray.
●
Do not push the disc tray whilst it is moving.
●
If the power fails whilst the tray is open, wait until the power is restored.
●
If the disc tray is stopped forcibly, “E-CD20” will appear in the display and the unit
will not function.
If this occurs, press the ON/STAND-BY button to enter the power stand-by mode
and then turn the power on again.
will not function.
If this occurs, press the ON/STAND-BY button to enter the power stand-by mode
and then turn the power on again.
●
If TV or radio interference occurs during CD operation, move the unit away from the
TV or radio.
TV or radio.
●
If a disc is damaged, dirty, or loaded upside down, the disc will be skipped.
Advanced CD Playback
■
To locate the desired portion
For audible fast forward:
Press and hold down the
Press and hold down the
2
button during playback.
For audible fast reverse:
Press and hold down the
Press and hold down the
3
button during playback.
Notes:
●
Normal playback will resume when the
3
or
2
button is released.
●
When the end of the last track is reached during fast forward, “DISC END” will
appear in the display and CD operation will be paused. When the beginning of the
first track is reached during fast reverse, the unit will enter the playback mode.
appear in the display and CD operation will be paused. When the beginning of the
first track is reached during fast reverse, the unit will enter the playback mode.
●
You can locate the desired portion on a single disc only.
■
To locate the beginning of a track
To move to the beginning of the next track:
Slightly turn the jog dial clockwise during playback.
Slightly turn the jog dial clockwise during playback.
●
You can also skip to the desired track by turning the jog dial.
To restart the track being played:
Slightly turn the jog dial anti-clockwise during playback.
Slightly turn the jog dial anti-clockwise during playback.
●
You can also skip to the desired track by turning the jog dial.
Notes:
●
You can locate the beginning of a track on a single disc only.
●
The
5
or
4
button on the remote control allows you to locate the beginning of a
track.
CD
18
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
Advanced CD Playback (continued)
■
To specify a disc to play
You can play a disc by specifying the disc number.
Press one of the DISC 1 - DISC 6 buttons to select the desired disc.
●
Only the chosen disc will be played and stopped automatically.
Notes:
When one of the DISC 1 - DISC 6 buttons is green, it is ready to play that disc.
If there is not a disc on the tray, playback will not begin and the button will turn dark.
When one of the DISC 1 - DISC 6 buttons is green, it is ready to play that disc.
If there is not a disc on the tray, playback will not begin and the button will turn dark.
To stop playback:
Press the
Press the
■
button.
Selected disc number
■
Programmed play
By specifying discs from 1 to 6, and tracks from 1 to 99, you can choose up to 32
selections for playback in the order you like.
selections for playback in the order you like.
1
When in the stop mode, press the MEMORY button.
2
Press one of the DISC 1 - DISC 6 buttons to select the desired disc.
3
Turn the jog dial to select the desired track.
4
Press the MEMORY button.
(
When the track is memorised, the
above display will appear.)
●
To delete the last track you selected, press the CLEAR button whilst
“MEMORY” flashes.
“MEMORY” flashes.
5
Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be pro-
grammed.
grammed.
6
Press the
06
06
06
06
06
button to start playback.
●
At this time, playback will not begin even if one of the DISC 1 - DISC 6
buttons is pressed.
buttons is pressed.
To cancel the programmed play mode:
Whilst in the stop mode, press the CLEAR button. The MEMORY indicator will disap-
pear and all the programmed content will be cleared.
pear and all the programmed content will be cleared.
Notes:
●
Opening any tray of the programmed discs automatically cancels the programmed
sequence.
●
Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD to another function, the programmed selections will not be
cleared.
the function from CD to another function, the programmed selections will not be
cleared.
●
During programme operation, random play is not possible.
Playback order
Selected track number
Selected disc number
Playback order
Playback time
CD
19
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
Advanced CD playback (continued)
■
Repeat or Random play
1
Press the PLAY MODE button repeatedly to select the playback
mode.
mode.
2
Press the
06
06
06
06
06
or one of the DISC 1 - DISC 6 buttons to start play-
back.
or
●
If playback is started by pressing the
06
button, repeat or random play will
be performed on all discs.
●
If playback is started by pressing one of the DISC 1 - DISC 6 buttons, repeat
or random play will be performed on that disc.
or random play will be performed on that disc.
To repeat a programmed sequence:
Perform steps 1 - 6 in the “Programmed play” section and then select the repeat play-
back.
back.
Notes:
●
After using repeat or random play, be sure to press the
■
button.
Otherwise, the disc(s) will play continuously.
●
In random play, the CD player will select and play tracks automatically.
(You cannot select the order of the tracks.)
(You cannot select the order of the tracks.)
To cancel repeat or random play:
Press the PLAY MODE button repeatedly to select the normal play mode.
■
Switching the time display
Each time the TIME button on the remote control is pressed during playback or
in the pause mode, the display will change.
in the pause mode, the display will change.
The elapsed playing time for the current
track will be displayed.
track will be displayed.
The remaining playing time for the current
track will be displayed.
track will be displayed.
The total remaining playing time for the
disc will be displayed.
disc will be displayed.
Notes:
●
During random play, the total remaining playing time will not be displayed.
●
Depending on the CD, the playing time display may not match the total playing time
which is indicated on the CD jacket, as the time between tracks is not included.
which is indicated on the CD jacket, as the time between tracks is not included.
Normal playback mode
Random playback mode
Repeat playback mode
CD
20
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
Listening to a Cassette Tape
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE button.
3
Open the cassette door by pushing the area marked “PUSH
EJECT
EJECT
7
7
7
7
7
”.
PUSH EJECT
7
4
Load the cassette into the cassette compartment.
●
Face the desired side toward you and load the cassette as shown.
5
Press the
0
0
0
0
0 6
6
6
6
6
button to start playback.
To stop playback:
Press the
■
button.
Fast forward/rewind:
To advance the tape, press the
2
button.
To rewind it, press the
3
button.
Caution:
●
To remove the cassette, press the
■
button, and then open the compartment.
●
If a power failure occurs during tape operation, the tape head will remain engaged
with the tape and the cassette door will not open. Wait until power is restored.
with the tape and the cassette door will not open. Wait until power is restored.
●
Even if the
06
button is pressed during tape playback, the unit will not enter the
pause mode.
■
Cassette tape
●
For playback, use normal or low-noise tape for the best
sound. (Metal or CrO
sound. (Metal or CrO
2
tape is not recommended.)
For recording, use only normal tape.
●
Do not use C-120 tapes or poor-quality tapes, as they may
cause malfunctions.
cause malfunctions.
●
Before loading a tape into the cassette compartment, tighten
the slack with a pen or pencil.
the slack with a pen or pencil.
T
ape Playback
Click on the first or last page to see other CD-CH1000 service manuals if exist.