Sharp CD-CH1000 User Manual / Operation Manual ▷ View online
13
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
Basic Operation
General Control
■
Display Brightness (2 levels)
You can switch the display brightness by pressing the DIMMER button.
When dark
When bright
■
Demonstration Mode
The first time the unit is plugged, the unit will enter the demonstration mode.
You will see words scroll.
You will see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode), press the DEMO
button. The unit will enter the low power consumption mode.
button. The unit will enter the low power consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the DEMO button again.
■
Opening and closing the control panel
The control panel is motorised.
The control panel automatically opens when the power is turned on, and
closes when the unit is set to the power stand-by mode.
The control panel automatically opens when the power is turned on, and
closes when the unit is set to the power stand-by mode.
When the power is turned on, you can open or close the control panel by
pressing the control panel open/close
pressing the control panel open/close
7
button.
Caution:
●
Do not push the control panel whilst it is opening or closing.
●
Do not press buttons on the control panel strongly. The hinge of the panel may be
broken.
broken.
●
Be careful not to jam your fingers in the control panel.
*CH1000H_P13_15(Basic)
00.7.7, 1:02 PM
13
14
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
Basic Operation
Sound Control
■
Volume control
Press the VOLUME
W
button to increase the volume and the VOLUME
X
button for decreasing.
■
Bass control
When the power is first turned on, the unit will enter the extra bass mode
which emphasises the bass frequencies, and “X-BASS” will appear.
To cancel the extra bass mode, press the X-BASS button.
which emphasises the bass frequencies, and “X-BASS” will appear.
To cancel the extra bass mode, press the X-BASS button.
Bass is emphasised.
Cancelled.
■
Equalizer
When the EQUALIZER button is pressed, the current mode setting will be
displayed. To change to a different mode, press the EQUALIZER button re-
peatedly until the desired sound mode appears.
displayed. To change to a different mode, press the EQUALIZER button re-
peatedly until the desired sound mode appears.
The sound is not modified.
Bass and treble are emphasised.
Treble is reduced.
Vocals (midrange tones) are
emphasised.
*CH1000H_P13_15(Basic)
00.7.7, 1:02 PM
14
15
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
Basic Operation
To confirm the time display:
Press the DISPLAY button. The time display will appear for about 3 seconds.
Note:
“CLOCK” will appear or time will flash at the push of the DISPLAY button when the AC
power supply is restored after a power failure or after unplugging the unit.
Reset the clock as follows.
“CLOCK” will appear or time will flash at the push of the DISPLAY button when the AC
power supply is restored after a power failure or after unplugging the unit.
Reset the clock as follows.
To reset the clock:
Perform “Setting the Clock” from the beginning.
At this time, step 4 (for selecting the 24-hour or 12-hour display) will be skipped.
At this time, step 4 (for selecting the 24-hour or 12-hour display) will be skipped.
To change the 24-hour or 12-hour display:
Clear all the programmed contents.
[Refer to “If trouble occurs (reset)” on page 38 for details.]
Preform “Setting the clock” from the beginning.
[Refer to “If trouble occurs (reset)” on page 38 for details.]
Preform “Setting the clock” from the beginning.
Setting the Clock
In this example, the clock is set for the 24-hour (0:00) display.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the MENU button.
3
Turn the jog dial to select “CLOCK” and within 10 seconds, press
the ENTER button.
the ENTER button.
4
Turn the jog dial to select the 24-hour or 12-hour display and
within 2 minutes, press the ENTER button.
within 2 minutes, press the ENTER button.
5
Turn the jog dial to adjust the hour and within 2 minutes, press
the ENTER button.
the ENTER button.
●
When the 12-hour display is selected, “AM” will change automatically to “PM”.
6
Turn the jog dial to adjust the minutes and within 2 minutes, press
the ENTER button.
the ENTER button.
●
The hour will not advance even if minutes advance from “59” to “00”.
●
The clock starts from “0” second. (Seconds are not displayed.)
The time display will disappear after a few seconds.
The time display will disappear after a few seconds.
“0:00”
→
The 24-hour display will appear. (0:00 - 23:59)
“AM 12:00”
→
The 12-hour display will appear. (AM 12:00 - PM 11:59)
“AM 0:00”
→
The 12-hour display will appear. (AM 0:00 - PM 11:59)
*CH1000H_P13_15(Basic)
00.7.7, 1:03 PM
15
16
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
Listening to a CD (CDs)
■
To play discs in turn (from Disc 1 to Disc 6)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the DISC 1
7
7
7
7
7
button to open the disc tray 1.
4
Place the CD on the disc tray 1, label side up.
●
Be sure to place 8 cm (3") CD in the middle of the disc trays.
5
Press the DISC 1
7
7
7
7
7
button to close the disc tray 1.
6
You can place discs on the trays 2 - 6 by following steps 3 - 5.
Note:
The system will search CD trays until it finds a CD and will not search the rest of the
trays.
The system will search CD trays until it finds a CD and will not search the rest of the
trays.
12 cm (5”)
8 cm (3”)
Total number of tracks
Total playing time
Means "disc
inside"
inside"
This system can play audio CD-R and CD-RW discs just as CD discs, but cannot
perform recording.
perform recording.
CD
Click on the first or last page to see other CD-CH1000 service manuals if exist.