Sharp CD-BA1300 User Manual / Operation Manual ▷ View online
20
(Continued)
„
To recall stations that have been stored in
memory (PTY search)
memory (PTY search)
You can search for desired stations by specifying the pro-
gramme type (news, sports, traffic programme, etc. ... see
pages 16-17) from among the stations that have been
stored in memory. (ASPM is convenient for storing stations
in memory.)
gramme type (news, sports, traffic programme, etc. ... see
pages 16-17) from among the stations that have been
stored in memory. (ASPM is convenient for storing stations
in memory.)
1
Press the ON/STAND-BY button to turn the power
on.
on.
2
Press the TUNER (BAND) button.
3
Press the TUNER (BAND) button to select the FM ST
or FM band.
or FM band.
4
Press the PTY.TI SEARCH button.
z
"PTY TI" and "SELECT" will appear alternately for about
6 seconds.
6 seconds.
5
Within 6 seconds, press the PRESET ( or ) but-
ton to select the programme type you want.
ton to select the programme type you want.
z
Each time the button is pressed, the programme type will
appear. If the button is held down for more than 0.5 sec-
onds, the programme type will appear continuously.
appear. If the button is held down for more than 0.5 sec-
onds, the programme type will appear continuously.
6
Whilst the selected programme type is flashing
(within 4 seconds), press the PTY.TI SEARCH button
again.
(within 4 seconds), press the PTY.TI SEARCH button
again.
z
After the name of the selected programme type has been
lit for 2 seconds, "SEARCH" will appear, and the search
operation will start.
lit for 2 seconds, "SEARCH" will appear, and the search
operation will start.
Note:
If the programme type has changed from flashing to steadily
lit and the PTY.TI SEARCH button is pressed, nothing will
happen. In this case, start again from step 4.
Each time a station of the programme type you want is
encountered, you will be able to listen to the broadcast.
The channel number will flash for about 3 seconds. The sta-
tion name will flash for 7 seconds, and then remain lit.
If the programme type has changed from flashing to steadily
lit and the PTY.TI SEARCH button is pressed, nothing will
happen. In this case, start again from step 4.
Each time a station of the programme type you want is
encountered, you will be able to listen to the broadcast.
The channel number will flash for about 3 seconds. The sta-
tion name will flash for 7 seconds, and then remain lit.
z
If you want to listen to another station of that programme
type, press the PTY.TI SEARCH button whilst the chan-
nel number or station name is flashing. The unit will look
for the next station of that type.
type, press the PTY.TI SEARCH button whilst the chan-
nel number or station name is flashing. The unit will look
for the next station of that type.
Note:
z
If no station of the programme type you want can be
found, "NOT FOUND" will appear for 4 seconds.
found, "NOT FOUND" will appear for 4 seconds.
If you have selected the traffic programme:
If you select traffic programme (TP) as the programme type
in step 5 to receive only radio stations which broadcast traf-
fic programmes, "TP" will appear. (However, this does not
necessarily mean that you will hear any traffic announce-
ments at that time.) During a traffic announcement, "TA" will
appear. (Both "TP" and "TA" will appear during an
announcement.)
in step 5 to receive only radio stations which broadcast traf-
fic programmes, "TP" will appear. (However, this does not
necessarily mean that you will hear any traffic announce-
ments at that time.) During a traffic announcement, "TA" will
appear. (Both "TP" and "TA" will appear during an
announcement.)
(Main unit operation)
2,3
4,6
1
5
21
(Continued)
„
To manually recall the stations stored in
memory
memory
Press the PRESET ( or ) button.
z
Each time the button is pressed, the channel number will
change.
change.
z
After the channel number has been displayed for 2 sec-
onds, the frequency for that channel will appear for 2 sec-
onds, and then the station name will appear.
onds, the frequency for that channel will appear for 2 sec-
onds, and then the station name will appear.
„
Notes for Radio text
z
The radio text for 8 characters will be displayed steadily
for 4 seconds and then it will scroll across the display.
for 4 seconds and then it will scroll across the display.
z
In the radio text position, "NO RT" will appear if the RDS
station is not broadcasting any radio text.
station is not broadcasting any radio text.
z
Whilst radio text data is received or when the text con-
tents change, "RT" will be displayed.
tents change, "RT" will be displayed.
„
Notes for RDS operation
If any of the following events occur, it does not mean that the
unit is faulty.
unit is faulty.
z
"PS", "NO PS" and a station name appear alternately,
and the unit does not operate properly.
and the unit does not operate properly.
z
If a particular station is not broadcasting properly or a
station is conducting tests, the RDS reception function
may not work properly.
station is conducting tests, the RDS reception function
may not work properly.
z
When you receive an RDS station whose signal is too
weak, information like the station name may not be dis-
played, even if "RDS" is lit.
weak, information like the station name may not be dis-
played, even if "RDS" is lit.
„
To switch the display
Each time the DISPLAY MODE button is pressed whilst an
FM station is tuned in, the display will switch as follows:
FM station is tuned in, the display will switch as follows:
When the station you are tuning in is not an RDS station or
even if it is an RDS station but it is very weak signal, the dis-
play will change in the following order:
even if it is an RDS station but it is very weak signal, the dis-
play will change in the following order:
Notes:
z
"NO PS" , "NO PTY" or "NO RT" will flash for about 5
seconds, and then the frequency will be displayed.
seconds, and then the frequency will be displayed.
z
The display can only be switched whilst tuned to the FM
band.
band.
(Main unit operation)
PRESET( )
(Main unit operation)
DISPLAY
MODE
MODE
Station
name (PS)
name (PS)
Programme
type (PTY)
type (PTY)
Radio text
(RT)
(RT)
Frequency
"NO PS"
"NO PTY"
"NO RT"
Frequency
22
(Continued)
„
EON-PTY
1
Tune in the desired RDS station (whilst a station
name is displayed).
name is displayed).
2
Press the EON button when "EON" appears.
z
"PTY TI" and "SELECT" will appear alternately for about
6 seconds.
6 seconds.
3
Whilst they are displayed, select the desired pro-
gramme type using the PRESET ( or ) button.
gramme type using the PRESET ( or ) button.
z
The selected programme type will flash.
4
Within 4 seconds, press the PTY.TI SEARCH button.
z
The selected programme type and "WAITING" will be dis-
played for 2 seconds each.
played for 2 seconds each.
z
"PTY" will appear, and the unit will enter the EON-PTY
stand-by mode.
stand-by mode.
5
When a programme of the type specified starts on
an ON (other network) station, the unit will automati-
cally switch to the station broadcasting the selected
programme type, and "PTY" will flash.
an ON (other network) station, the unit will automati-
cally switch to the station broadcasting the selected
programme type, and "PTY" will flash.
6
When the programme specified for the ON station is
over, the unit will automatically return to the original
station you were tuned to.
over, the unit will automatically return to the original
station you were tuned to.
Note:
z
If the EON button is pressed when "EON" is not dis-
played, "NO EON" will appear for 5 seconds to indicate
that the unit cannot enter the EON stand-by mode.
played, "NO EON" will appear for 5 seconds to indicate
that the unit cannot enter the EON stand-by mode.
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON button.
("Programme type" "WAITING")
When in the EON stand-by mode, press the EON button.
("Programme type" "WAITING")
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON button.
Within 4 seconds, press it again. The EON stand-by mode
will be cancelled.
When in the EON stand-by mode, press the EON button.
Within 4 seconds, press it again. The EON stand-by mode
will be cancelled.
z
"PTY" will go out.
About the PTYI (Dynamic PTY Indicator):
PTYI (Dynamic PTY Indicator) will appear whilst the
Dynamic PTY station is received. Dynamic PTY indicates
that the PTY for the station tuned in, or the PTY referenced
in the EON data, is assessed whenever the programme
changes and may be changed.
PTYI (Dynamic PTY Indicator) will appear whilst the
Dynamic PTY station is received. Dynamic PTY indicates
that the PTY for the station tuned in, or the PTY referenced
in the EON data, is assessed whenever the programme
changes and may be changed.
Note:
z
When "PTYI" appears, if you press the DISPLAY MODE
button to display the programme type, you can check the
type of programme you are actually receiving.
button to display the programme type, you can check the
type of programme you are actually receiving.
(Main unit operation)
4
2
3
PTYI
Meaning
Lights up
Tuned into a dynamic PTY station.
Goes out
Tuned into a static PTY.
23
(Continued)
„
EON-TI
1
Tune in the desired RDS station (whilst a station
name is displayed).
name is displayed).
2
Press the EON button when "EON" appears.
z
"PTY TI" and "SELECT" will appear alternately for about
6 seconds.
6 seconds.
3
Whilst they are displayed, select the TI (Traffic Infor-
mation) using the PRESET ( or ) button.
mation) using the PRESET ( or ) button.
z
The selected "TI" will flash.
4
Within 4 seconds, press the PTY.TI SEARCH button.
z
"TI" and "WAITING" will appear for 2 seconds each.
z
"TI" will appear, and the unit will enter the EON-TI stand-
by mode.
by mode.
5
When a TA specified starts on an ON (other network)
station, the unit will automatically switch to that sta-
tion, and "TI" will flash.
station, the unit will automatically switch to that sta-
tion, and "TI" will flash.
6
When the traffic announcement is over, the unit will
automatically return to the original station you were
tuned to.
automatically return to the original station you were
tuned to.
Note:
z
If the EON button is pressed when "EON" is not dis-
played, "NO EON" will appear for 5 seconds to indicate
that the unit cannot enter the EON stand-by mode.
played, "NO EON" will appear for 5 seconds to indicate
that the unit cannot enter the EON stand-by mode.
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON button.
("TI" "WAITING")
When in the EON stand-by mode, press the EON button.
("TI" "WAITING")
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON button.
Within 4 seconds, press it again. The EON stand-by mode
will be cancelled.
When in the EON stand-by mode, press the EON button.
Within 4 seconds, press it again. The EON stand-by mode
will be cancelled.
z
"TI" will go out.
Note:
z
If neither "TP" nor "TA" appear, then even if "EON"
appears, the unit cannot enter the EON-TI stand-by
mode. In this condition, if the PTY.TI SEARCH button is
pressed after TI is selected, "NO TI" will flash for 4 sec-
onds.
appears, the unit cannot enter the EON-TI stand-by
mode. In this condition, if the PTY.TI SEARCH button is
pressed after TI is selected, "NO TI" will flash for 4 sec-
onds.
(Main unit operation)
4
2
3
Click on the first or last page to see other CD-BA1300 service manuals if exist.