Sharp AY-X127E Service Manual ▷ View online
AH-X127E
AU-X127E
AU-X127E
AY-X127E
AE-X127E
AE-X127E
42
7. Remove five screws which are fixing right side of the rear
cabinet.
8. Remove one screw which is fixing left side of the rear
cabinet.
10. Remove three screws which are fixing condenser box
cover.
11. Remove two screws which are fixing the control box.
9. Remove four screws which are fixing back side of the
rear cabinet.
And take out the rear cabinet.
And take out the rear cabinet.
12. Disconnect following connectors.
(AU-X127E: Fan motor / Thermistor)
(AE-X127E: Fan motor / Thermistor / Reverse valve)
(AE-X127E: Fan motor / Thermistor / Reverse valve)
(Above Figure is AE-X127E)
AH-X127E
AU-X127E
AU-X127E
AY-X127E
AE-X127E
AE-X127E
43
13. Cut the band.
14. Disconnect five wires from the control box to the reactor
and capacitors.
(To reactor: two wires / To capacitor: three wires)
(To reactor: two wires / To capacitor: three wires)
16. Remove two screws which are fixing heat insulator
assembly. And take it out.
17. Remove two screws which are fixing bulkhead. And take
it out.(Fixing the bottom part is used special screw)
15. Take out the control box and put it just under.
(The compressor cord is still wired)
18. Disconnect the compressor cord.(Three wires)
AH-X127E
AU-X127E
AU-X127E
AY-X127E
AE-X127E
AE-X127E
44
19. Take out the compressor cover.
20. Take out the thermistor from the tube.
21. Take out the thermistor from the holder.
(AE-X127E only)
[Reactor]
22. Disconnect the wires from the reactor to the condenser
22. Disconnect the wires from the reactor to the condenser
box.(4 wires)
23. Remove one screw which is fixing the reactor cover. And
take it out.
24. Remove two screws which are fixing the reactor. And
take it out.
[Fan motor angle]
25. Remove two screws which are fixing the fan motor. And
25. Remove two screws which are fixing the fan motor. And
take it out.
AH-X127E
AU-X127E
AU-X127E
AY-X127E
AE-X127E
AE-X127E
45
TINSEA162JBR0 7BO 1
Electrostatic Type
AZ-F1207
»
The filters are sealed in a plastic bag to keep
thier dust collection effect. Do not open the
bag until using the filters. (Otherwise the filters’
life may get shorter.)
thier dust collection effect. Do not open the
bag until using the filters. (Otherwise the filters’
life may get shorter.)
»
Do not expose the filters to direct sunlight.
(Otherwise they may deteriorate.)
(Otherwise they may deteriorate.)
Precautions
Applicable air-conditioner models
1
Open the panel and take out the
air filters.
air filters.
3
Slide the air filters into position.
Air Purifying Filter
for Air Conditioner
for Air Conditioner
(2-sheet package)
Panel
Air filter
Hooks
2
Replace the old air purifying filters
with new ones.
with new ones.
Unhook the filter
frame. Snap out in
the arrow marked
direction.
frame. Snap out in
the arrow marked
direction.
Place the
new filter
new filter
Snap the filter
frame back into
position.
frame back into
position.
4
Close the panel.
»
Push the arrow marked position
firmly to lock it in place.
Be careful not to
get injured with the
metallic edge
get injured with the
metallic edge
Replacement intervals guideline
Replace the air purifying filters at
the intervals of 3-6 months.
the intervals of 3-6 months.
»
The dirty filters are not washable
for reuse.
The filters are available at your
nearest dealer.
for reuse.
The filters are available at your
nearest dealer.
R
Type
How to Replace
AH-X127 series
AY-X127 series
AY-X127 series
1
3
Pull down
2
Push up and
unhook.
unhook.
Click on the first or last page to see other AY-X127E service manuals if exist.