Panasonic TX-LR65WT600 Service Manual ▷ View online
Data Copy by USB Memory
Purpose
a) Board replacement (Copy the data when exchanging A-board):
a) Board replacement (Copy the data when exchanging A-board):
When exchanging A-board, the data in original A-board can be copied to USB Memory and then copy to new A-board.
b) Hotel (Copy the data when installing a number of units in hotel or any facility):
When installing a number of units in hotel or any facility, the data in master TV can be copied to USB Memory and the copy
to other TVs.
to other TVs.
Preparation
Make pwd file as startup file for (a) or (b) in an empty USB Memory.
1. Insert an empty USB Memory to your PC.
2. Right-click a blank area in a USB Memory window, point to New, and then click text document. A new file is created by
2. Right-click a blank area in a USB Memory window, point to New, and then click text document. A new file is created by
default (New Text Document.txt).
3. Right-click the new text document that you just created and select rename, and then change the name and extension
of the file to the following file name (a) or (b) and press ENTER.
File name:
(a) For Board replacement: boardreplace.pwd
(b) For Hotel: hotel.pwd
(b) For Hotel: hotel.pwd
Note:
Please make only one file to prevent the operation error.
No any other file should be in USB Memory.
(After exchanging)
Copy back from USB Memory
TV
A-board
USB
Memory
(Before exchanging)
Copy to USB Memory
Following data can be copied.
User setting data
(inc. Hotel mode setting data)
Channel scan data
Adjustment and factory preset data
User setting data
(inc. Hotel mode setting data)
Channel scan data
Adjustment and factory preset data
Master TV
Other TV
Other TV
Other TV
Following data can be copied.
User setting data
(inc. Hotel mode setting data)
Channel scan data
User setting data
(inc. Hotel mode setting data)
Channel scan data
Copy to USB Memory
Copy from USB Memory
USB
Memory
17
Data Copy from TV set to USB Memory
1. Turn on the TV set.
2. Insert USB Memory with a startup file (pwd file) to USB Terminal.
2. Insert USB Memory with a startup file (pwd file) to USB Terminal.
On-screen Display will be appeared according to the startup file automatically.
3. Input a following password for (a) or (b) by using remote control.
(a) For Board replacement: 2770
(b) For Hotel: 4850
(b) For Hotel: 4850
Data will be copied from TV set to USB Memory.
It takes around 2 to 6 minutes maximum for copying.
It takes around 2 to 6 minutes maximum for copying.
4. After the completion of copying to USB Memory, remove USB Memory from TV set.
5. Turn off the TV set.
5. Turn off the TV set.
Note:
Following new folder will be created in USB Memory for data from TV set.
(a) For Board replacement: user_setup
(b) For Hotel: hotel
(b) For Hotel: hotel
Data copy
(Board replacement) or (Hotel)
(Board replacement) or (Hotel)
Input Password
2770 or 4850
2770 or 4850
Performing
Completion
Performing
Data Copy(Board replacement )
Input password
-----
Data Copy(Board replacement )
Input password
-----
Data Copy(Board replacement )
Copy TV to Media
Please wait for a while
Please do not remove the Media
GETTING
Data Copy(Board replacement )
Data copy has been successful
Please remove Media
FINISH
18
Data Copy from USB Memory to TV set
1. Turn on the TV set.
2. Insert USB Memory with Data to USB Terminal.
2. Insert USB Memory with Data to USB Terminal.
On-screen Display will be appeared according to the Data folder automatically.
3. Input a following password for (a) or (b) by using remote control.
(a) For Board replacement: 2771
(b) For Hotel: 4851
(b) For Hotel: 4851
Data will be copied from USB Memory to TV set.
4. After the completion of copying to USB Memory, remove USB Memory from TV set.
(a) For Board replacement: Data will be deleted after copying (Limited one copy).
(b) For Hotel: Data will not be deleted and can be used for other TVs.
(b) For Hotel: Data will not be deleted and can be used for other TVs.
5. Turn off the TV set.
Note:
1. Depending on the failure of boards, function of Data for board replacement does not work.
2. This function can be effective among the same model numbers.
2. This function can be effective among the same model numbers.
Input Password
Performing
Input Password
2771 or 4851
2771 or 4851
Performing
Completion
Performing
Data Copy(Board replacement )
Input password
-----
Data Copy(Board replacement )
Copy Media to TV
Please wait for a while
Please do not remove the Media
WRITING
Data Copy(Board replacement )
Data copy has been successful
Please turn off the TV for system
initializing
FINISH
19
Option Bytes Description
OPTION1
b0
Enable Compatible with Video and
Sound for VIF
Sound for VIF
ON (1) / OFF (0)
b1
TEXT Ch Refresh
ON (1) / OFF (0)
b2
ID-1
ON (1) / OFF (0)
b3
Macrovision Auto-judge
ON (1) / OFF (0)
b4
“BassBoost” sound menu enable
ON (1) / OFF (0)
b5
“Digital Remaster” sound menu enable
ON (1) / OFF (0)
b6
Enable HDMI force reset
ON (1) / OFF (0)
b7
TINT_Component_HDMI
ON (1) / OFF (0)
OPTION2
b0
Adjust gain enable
ON (1) / OFF (0)
b1
A2 BG enable (5.5MHz)
ON (1) / OFF (0)
b2
A2 DK1 enable (6.26MHz)
ON (1) / OFF (0)
b3
A2 DK3 enable (5.742MHz)
ON (1) / OFF (0)
b4
NICAM scan
ON (1) / OFF (0)
b5
NICAM BG enable (5.5MHz)
ON (1) / OFF (0)
b6
NICAM I enable (6.0MHz)
ON (1) / OFF (0)
b7
NICAM DK enable (6.5MHz)
ON (1) / OFF (0)
OPTION3
b0
NICAM priority
ON (1) / OFF (0)
b1
Starhub scan enable (Singapore)
ON (1) / OFF (0)
b2
Enable special edge smoother function
(CHINA)
(CHINA)
ON (1) / OFF (0)
b3
A2 DK2 enable
ON (1) / OFF (0)
b4
Inhibition of countermeasure
for SIF signal drop
for SIF signal drop
ON (1) / OFF (0)
b5
Get onid from physical CH (CHINA)
ON (1) / OFF (0)
b6
SSU search enable for HOTEL model
ON (1) / OFF (0)
b7
SASO mute (ASIA)
ON (1) / OFF (0)
OPTION4
b1
Enable Compatible with Video and
Sound for VIF
Sound for VIF
ON (1) / OFF (0)
b2
3DYC color motion detect
ON (1) / OFF (0)
b3
RF Clamp Current minimum (TAIWAN)
ON (1) / OFF (0)
b4
SHOP banner enable
ON (1) / OFF (0)
b5
Enable LGD panel problem soft
countermeasure
countermeasure
ON (0) / OFF (1)
b6
PIP
ON (1) / OFF (0)
b7
Enable workaround for Polsat CAM
problem (POLAND)
problem (POLAND)
ON (1) / OFF (0)
20
Click on the first or last page to see other TX-LR65WT600 service manuals if exist.