Panasonic TH-49SF2U / TH-49SF2E / TH-49SF2W (serv.man2) Service Manual ▷ View online
ADJ-5
SECTION 3 ADJUSTMENTS
<49SF2U/E/W>
1.2.3. Confirmation of version
1. Display the CAT mode (Refer to Section 1 - 3.1.)
2. The CAT mode menu appears on the screen. Select the [CD Mode] menu with [pq] buttons and press the [MUTE] button
for more than 3 seconds to enter the CD mode.
1.2.4. Confirmation of version (User mode)
1. Press [SETUP] button on remote controller.
2. The Setup menu appears on the screen. Select the [Language] menu with [pq] buttons and press the [Enter] button.
3. The Options menu appears on the screen. Select the [Display software information] menu with [pq] buttons and press the
[MUTE] button to confimation menu.
Sub CPU firmware version
ADJ-6
SECTION 3 ADJUSTMENTS
<49SF2U/E/W>
1.3.1. Tools and preparation
1. Computer : Used for firmware transforming
2. Communication cable : LAN cable (Use LAN cable that is compatible with category 5 or above.)
3. Software & updating file : Update Tool & firmware download from service website.
(UpdateTool_FP_x.x.x.x.exe :
Ver.1.0.0.0 or later
)
4. Extract the software and file package to your favorite directory on your computer.
5. Connect the LAN terminal (IN) and PC with a LAN cable.
1.3.2. Updating procedure
1.3. LAN updating
Updatable firmware list << O: Updatable, X: Not updatable, ---: No firmware >>
Model
Firmware
MAIN
SUB
EEPROM
VSRX
FPGA1
LICENSE
FRC
SF2 series
O
X
O
O
---
O
---
1. Start up the updating software [Update Tool – FP.exe].
・
The main screen of the Update Tool opens.
■
Description of each button
[Connection Check]
Connects to the Display unit and displays the model
information.
[Find]
Selects data file to update.
[Update]
Sends to the Display unit the selected data file.
[CLOSE]
Close the Update Tool.
※
For further information of error code, refer to the item [7. ERROR MESSAGE LIST].
ADJ-7
SECTION 3 ADJUSTMENTS
<49SF2U/E/W>
2. Input the IP Address and Connection Port
・
Set up the IP Address and Connection Port of connected the Display
unit.
3. Press the [Find] button, and Explorer opens
・
Select the data file to update,
press [Open].
・
Set up the Display unit to the following
Network settings menu / Network control : On
Options menu / LAN control protocol :Protocol 2
A preservation place of the data file
is displayed in full path.
Firmware (or data) name
and a version (included in
the data file) are displayed.
※
For firmware (or data) name, refer to the item
[Updatable firmware list].
SAMPLE
SAMPLE
ADJ-8
SECTION 3 ADJUSTMENTS
<49SF2U/E/W>
4. Press the [Connection Check] button
It connects to the Display unit and displays the model information.
※
※
This operation is omissible for update.
・
”Connecting” is displayed during the connection
confirmation with the Display unit.
・
Succeed in connection, the Display unit information is
displayed. (Model name, Version, Serial number)
・
Confirmation is over, Press the [CLOSE] button.
5. Press the [Update] button, Send the selected data file.
・
Connection to the Display unit.
・
The confirmation window of upload will
appear and then click [OK] to start updating.
Original version of firmware
New version of firmware
SAMPLE
SAMPLE
SAMPLE
Click on the first or last page to see other TH-49SF2U / TH-49SF2E / TH-49SF2W (serv.man2) service manuals if exist.