Panasonic KX-TS2368RUW Service Manual ▷ View online
4.3. Setting the LCD Contrast
You can select the LCD contrast level from 1 to 4 by programming. Your phone comes from the factory set to 3.
Make sure that a call is not put on hold.
Make sure that a call is not put on hold.
4.4. Selecting the Ringer Volume
You can select the ringer volume of each line to HIGH, LOW or OFF. Your phone comes from the factory set to HIGH.
10
KX-TS2368RUW
5 SPECIAL FEATURES
5.1. FLASH Button
5.2. Selecting the Flash Time
The flash time depends on your telephone exchange or host PBX. You can select the following flash times: "80, 90, 100, 110,
200, 250, 300, 400, 600, 700 ms (milliseconds)". Your phone comes from the factory set to "600 ms".
Make sure that a call is not put on hold.
200, 250, 300, 400, 600, 700 ms (milliseconds)". Your phone comes from the factory set to "600 ms".
Make sure that a call is not put on hold.
·
If you are connected via a PBX, a longer flash time may be necessary to use PBX functions (transferring a call, etc.). Consult
your PBX installer for the correct setting.
your PBX installer for the correct setting.
11
KX-TS2368RUW
5.3. Setting the Pin Code
A 4-digit PIN Code (Personal Identification Number) prevents unauthorized persons from using your unit. The PIN Code is
required for the dial lock and call restriction to be set or canceled. The factory preset PIN code is "1111".
Make sure that a call is not put on hold.
required for the dial lock and call restriction to be set or canceled. The factory preset PIN code is "1111".
Make sure that a call is not put on hold.
12
KX-TS2368RUW
5.4. Dial Lock
You can prevent others from making a call to any number except the one pre-programmed in the memory of the EMERGENCY
button. Once you locked the dialing buttons, even emergency numbers cannot be dialed. Only incoming calls are accepted until
the dial lock is canceled.
Before using this feature, we recommend storing an emergency number in the memory of the EMERGENCY button. Even if the
dialing buttons are locked, the number stored in the button can be dialed.
button. Once you locked the dialing buttons, even emergency numbers cannot be dialed. Only incoming calls are accepted until
the dial lock is canceled.
Before using this feature, we recommend storing an emergency number in the memory of the EMERGENCY button. Even if the
dialing buttons are locked, the number stored in the button can be dialed.
·
If you choose not to program emergency numbers, but plan to use the dial lock, any number programmed into the
EMERGENCY button can be accessed.
EMERGENCY button can be accessed.
5.4.1. To Set the Dial Lock
5.4.2. To Cancel the Dial Lock
Follow steps 1 through 3 above again.
·
will disappear, and the unit will return to the standby mode.
13
KX-TS2368RUW
Click on the first or last page to see other KX-TS2368RUW service manuals if exist.