Panasonic KX-TS2368RUW Service Manual ▷ View online
2 DISPLAY
5
KX-TS2368RUW
3 CONNECTION
3.1. Connecting the Handset
Connect the handset as shown below.
·
Use only a Panasonic Handset for the KX-T2378JXW.
3.2. Connecting the Telephone Line Cord
Connect the telephone line cord(s) to the unit as follows.
To connect a two-line telephone jack
To connect two single-line telephone jacks
6
KX-TS2368RUW
If you use the unit only as a single-line telephone
3.3. Connecting a Communication Device
After connecting the telephone line cord to a two-line telephone jack, you can connect a communication device (computer,
modem, fax, answering machine, etc.) through this unit using the LINE2/DATA jack.
modem, fax, answering machine, etc.) through this unit using the LINE2/DATA jack.
·
If the LINE2/DATA indicator lights red, the communication device is in use. Use LINE1 to make or answer other calls. Otherwise
the communication device may not operate properly.
the communication device may not operate properly.
7
KX-TS2368RUW
4 SETTINGS
4.1. Selecting the Dialing Mode
You can select the dialing mode by programming. If you have touch tone service, set to "Tone". If rotary or pulse service is used,
set to "Pulse". Your phone comes from the factory set to "Tone".
Make sure that a call is not put on hold.
set to "Pulse". Your phone comes from the factory set to "Tone".
Make sure that a call is not put on hold.
8
KX-TS2368RUW
Click on the first or last page to see other KX-TS2368RUW service manuals if exist.