Panasonic KX-TGA914EXS Service Manual ▷ View online
17
KX-TGA914EXS
7 Operation Instructions
7.1.
Registering the Cordless Camera
7.2.
Cancelling the Cordless Camera
8 Service Mode
8.1.
How to Clear User Setting
The unit is reset to the Factory settings by this operation.
Note:
Note:
This operation should not be performed for a usual repair.
1. Carry out PC Setting (P.34) in The Setting Method of JIG.
2. Execute the command “sendchar EPD 2”.
2. Execute the command “sendchar EPD 2”.
18
KX-TGA914EXS
9 Troubleshooting Guide
9.1.
Troubleshooting Flowchart
Cross Reference:
Check Power (P.19)
Check Link (P.20)
Check Camera (P.21)
Check Camera Unit Transmission (P.22)
Check Camera Unit Reception (P.22)
Check Link (P.20)
Check Camera (P.21)
Check Camera Unit Transmission (P.22)
Check Camera Unit Reception (P.22)
Note:
(*1) Refer to Registering the Cordless Camera (P.17).
(*2) How to Link Camera Unit and Handset (TGA910).
1. Press [INTERCOM] key of Handset.
2. Select registered camera by Handset navigator key
(up and down) and press
(*2) How to Link Camera Unit and Handset (TGA910).
1. Press [INTERCOM] key of Handset.
2. Select registered camera by Handset navigator key
(up and down) and press
.
3. Yellow-green LED changes from lighting to flashing and
link is complete.
link is complete.
19
KX-TGA914EXS
9.1.1.
Check Power
Cross Reference:
Power Supply Circuit (P.9)
Reset Circuit (P.11)
Reset Circuit (P.11)
Note:
(*1) Refer to Specifications (P.6) for part number and
supply voltage of AC adaptor.
supply voltage of AC adaptor.
20
KX-TGA914EXS
9.1.2.
Check Link
Cross Reference:
Check Point (P.23)
Note:
(*1) Refer to Troubleshooting by Symptom (Camera) (P.23).
Click on the first or last page to see other KX-TGA914EXS service manuals if exist.