DOWNLOAD Panasonic KX-TG9127UAS / KX-TG9127UAT / KX-TGA910UAS / KX-TGA910UAT Service Manual ↓ Size: 2.83 MB | Pages: 105 in PDF or view online for FREE

37

38

• If the max number of handsets are already registered to the base unit, a new handset cannot be registered.
• To register the handset, refer to Registering a Handset to a Base Unit (P.22).
• To cancel the handset, refer to Cancelling a Handset (P.22).
• To copy the handset phonebook, refer to Copying Phonebook Entries (P.23).

39

Units are reset to the Factory settings by this operation (Erase recorded Voice messages, stored Phone numbers, Caller list and
etc.)

• Some menus are not reset. Refer to Operation Instructions (P.20).
• The reset menus differ depending on the following operations.
• This operation should not be performed for a usual repair.

Both the base unit and the registered handset which you did the following steps 

 to   are reset. Other registered handsets

will not be reset.

(*1) Refer to Registering a Handset to a Base Unit (P.22).

The only handset is reset by doing the following steps 

 to  .

• The registration of the base unit and the handset are cancelled.
• If the handset needs to be registered to the base unit, refer to Registering a Handset to a Base Unit (P.22).
• If users do not bring the base unit with them, the registration procedure has to be done by users themselves.

40

Check Power (P.41)
Bell Reception (P.47)
Check Battery Charge (P.42)
Check Link (P.43)
Check Handset Transmission (P.46)
Check Handset Reception (P.46)
Signal Route (P.14)
Check Caller ID (P.46)
Check TAM Operation (P.47)