Panasonic KX-TG6551CAM / KX-TGA650RUM / KX-TGA651RUM Service Manual ▷ View online
25
KX-TG6551CAM/KX-TGA650RUM/KX-TGA651RUM
8.2.
Copying Phonebook Items when Repairing
You can copy the handset phonebook to another (compatible Panasonic) handset. This will help to save the original phonebook
data which the customer has registered.
Refer to the following procedures.
data which the customer has registered.
Refer to the following procedures.
Note:
• BS=Base Unit, HS=Handset
• If the max number of handsets are already registered to the base unit, a new handset cannot be registered.
• To register the handset, refer to Registering a Handset to the Base Unit (P.38).
• To cancel the handset, refer to Deregistering a Handset (P.38).
• To copy the handset phonebook, refer to Copying Phonebook Entries in the Operating Instructions.
• If the max number of handsets are already registered to the base unit, a new handset cannot be registered.
• To register the handset, refer to Registering a Handset to the Base Unit (P.38).
• To cancel the handset, refer to Deregistering a Handset (P.38).
• To copy the handset phonebook, refer to Copying Phonebook Entries in the Operating Instructions.
BS
HS
Phonebook
data
data
Phonebook data is stored in a handset.
1. Register HS (A) to BS (B).
HS (A) is normal, therefore no need to copy the
phonebook data.
HS (A) is normal, therefore no need to copy the
phonebook data.
1. Register HS (A) to BS (B) as a handset no. 2.
2. Copy the phonebook data from HS (A) to HS (B).
3. Cancel the HS 2 (HS (A)).
2. Copy the phonebook data from HS (A) to HS (B).
3. Cancel the HS 2 (HS (A)).
BS (A)
NG
HS (A)
BS (A)
NG
BS (B)
Service center has
a normal BS (B).
a normal BS (B).
HS (A)
Case 1: A base unit has a defect.
(Replacing a base unit PCB etc...)
(Replacing a base unit PCB etc...)
HS (A)
BS (B)
HS (B)
HS (A)
Case 2: A base unit has a defect.
(Replacing both a base unit and a handset)
(Replacing both a base unit and a handset)
Service center has a normal
BS (B) and a normal HS (B).
BS (B) and a normal HS (B).
2
26
KX-TG6551CAM/KX-TGA650RUM/KX-TGA651RUM
Note:
• BS=Base Unit, HS=Handset
• If the max number of handsets are already registered to the base unit, a new handset cannot be registered.
• To register the handset, refer to Registering a Handset to the Base Unit (P.38).
• To cancel the handset, refer to Deregistering a Handset (P.38).
• To copy the handset phonebook, refer to Copying Phonebook Entries in the Operating Instructions.
• If the max number of handsets are already registered to the base unit, a new handset cannot be registered.
• To register the handset, refer to Registering a Handset to the Base Unit (P.38).
• To cancel the handset, refer to Deregistering a Handset (P.38).
• To copy the handset phonebook, refer to Copying Phonebook Entries in the Operating Instructions.
1. Cancel HS (A).
2. Register HS (B) as a handset no. 1.
3. Register HS (A) as a handset no. 2.
4. Copy the phonebook data from HS (A) to HS (B).
5. Cancel HS 2 (HS (A)).
2. Register HS (B) as a handset no. 1.
3. Register HS (A) as a handset no. 2.
4. Copy the phonebook data from HS (A) to HS (B).
5. Cancel HS 2 (HS (A)).
BS (A)
NG
HS (A)
BS (A)
HS (B)
HS (A)
Case 3: A handset has a defect.
(Radio transmission is functioning.)
(Radio transmission is functioning.)
NG
1. Register HS (A) as a handset no. 2.
2. Copy the phonebook data from HS (A) to HS (B).
3. Cancel HS 2 (HS (A)).
2. Copy the phonebook data from HS (A) to HS (B).
3. Cancel HS 2 (HS (A)).
NG
HS (A)
BS (B)
HS (B)
HS (A)
Case 4: A handset has a defect.
(Radio transmission is functioning.)
(Radio transmission is functioning.)
NG
Service center has
a normal HS (B).
a normal HS (B).
Service center has a normal
BS (B) and a normal HS (B).
BS (B) and a normal HS (B).
2
2
1
BS (A)
27
KX-TG6551CAM/KX-TGA650RUM/KX-TGA651RUM
8.3.
How to Clear User Setting
Units are reset to the Factory settings by this operation (Erase recorded Voice messages, stored Phone numbers, Caller list and
etc.)
etc.)
Note:
• Some menus are not reset. Refer to Operating Instructions (P.20).
• The reset menus differ depending on the following operations.
• This operation should not be performed for a usual repair.
• The reset menus differ depending on the following operations.
• This operation should not be performed for a usual repair.
8.3.1.
Resetting both base unit and handset
Both the base unit and the registered handset which you did the following steps
to
are reset. Other registered handsets
will not be reset.
Note:
(*1) Refer to Registering a Handset to the Base Unit (P.38).
8.3.2.
Resetting only handset
The only handset is reset by doing the following steps
to
.
Note: (*2)
• The handset registration to the base unit is cancelled.
• If the handset needs to be registered to the base unit, refer to Registering a Handset to the Base Unit (P.38).
• If users do not bring the base unit with them, the registration procedure has to be done by users themselves.
• If the handset needs to be registered to the base unit, refer to Registering a Handset to the Base Unit (P.38).
• If users do not bring the base unit with them, the registration procedure has to be done by users themselves.
1
④
1
Connect the AC adaptor to the base unit and install the charged batteries into the handset.
2
Confirm the handset is registered to the base unit ( lights).
If the handset is not registered to the base unit ( lights), register it. (*1)
3
Lift the handset and press
{ih} to put the handset in standby mode.
4
Press , , and key of the handset simultaneously until a confirmation tone is heard.
5
Disconnect the AC adaptor, then remove the battery.
1
5
9
Handset
Base unit
w
1
④
1
Install the charged batteries into the handset.
2
Lift the handset and press {ih} to put the handset in standby mode.
4
Remove the battery.
3
Press , , and key of the handset simultaneously until a confirmation tone is heard. (*2)
3
5
7
#
Handset
28
KX-TG6551CAM/KX-TGA650RUM/KX-TGA651RUM
9 Troubleshooting Guide
9.1.
Troubleshooting Flowchart
Flow Chart
Cross Reference:
Check Power (P.29)
Check Battery Charge (P.30)
Check Link (P.31)
Check the RF part (P.35)
Check Handset Transmission (P.39)
Check Handset Reception (P.39)
Check Caller ID (P.39)
Check Battery Charge (P.30)
Check Link (P.31)
Check the RF part (P.35)
Check Handset Transmission (P.39)
Check Handset Reception (P.39)
Check Caller ID (P.39)
Power ON Base Unit
FLOW CHART
Check Power
OK
Range
Check the RF part
Handset Voice Transmission
Check Handset Transmission
Handset Voice Reception
OK
OK
OK
Check Handset Reception
Caller ID function
Check Caller ID
Caller ID Error
No voice
No voice
No charge
Not working
NG
No link
OK
Link
Battery Charge
OK
Check Battery Charge
Check Link
Click on the first or last page to see other KX-TG6551CAM / KX-TGA650RUM / KX-TGA651RUM service manuals if exist.