Panasonic KX-TCD951GB / KX-TCD955GC Service Manual ▷ View online
KX-TCD951GB/KX-TCD955GC
9
1
Press
F
.
2
Press
or
until the arrow points to “
Program
”.
3
Press OK
.
4
Press
or
until the arrow points to “
Setting Base
”.
5
Press OK
.
• “
Input Command
” is displayed.
6
Press
3
.
7
Enter the base unit password.
• The factory preset is 0000. To change the base unit
password.
8
Press
1
.
• The current mode is displayed.
1: Tone
2: Pulse
Ex. Tone is selected.
9
To select Pulse, press
2
.
OR
To select Tone, press
To select Tone, press
1
.
10
Press OK
.
• A confirmation tone sounds.
• The display will return to “
• The display will return to “
Setting Base
”.
To return to the stand-by mode, press
C
or wait
for 60 seconds.
• If 5 beeps sound in step 7, the entered password is
incorrect. Enter the correct password.
• You can exit the programming mode any time by
pressing
C
.
(KX-TCD955GC)
Input Command
3 ----
Input Command
31 1
KX-TCD951GB/KX-TCD955GC
10
OPERATION
MAKING CALLS
TURNING THE POWER ON
Press
.
• After all possible configurations briefly appear, the display will change to the following. Then the handset is in the
stand-by mode.
The current connected base unit number is displayed. (KX-TCD951GB only)
(KX-TCD951GB)
(KX-TCD955GC)
• You can choose whether to display the base unit number, handset number or no display in the stand-by mode by
programming.
programming.
To turn the power OFF, press and hold
until a beep sounds.
• The display will go blank.
• The handset will not ring.
• The handset will not ring.
• Depending on the programming mode, you may not be able to turn the power off. First make sure the handset is set to the
stand-by mode.
Make sure that the power is ON.
1
Press
.
•
"
" is displayed. (KX-TCD955GC only)
2
Dial a phone number.
• The dialed number is displayed.
(KX-TCD951GB)
(KX-TCD955GC)
3
To hang up, press
or place the handset on the base unit.
•
The handset will return to the stand-by mode.
1 The number of new Caller ID calls received.
2 The current connected base unit number.
1
2
0 New Calls
Base 1
•
After a few seconds, the display will start showing the length of the call.
12345678
00-00-00
Click on the first or last page to see other KX-TCD951GB / KX-TCD955GC service manuals if exist.