Panasonic KX-TCD951EB / KX-TCD955EC Service Manual ▷ View online
9
KX-TCD951EB/KX-TCD955EC
1
Press
F
.
2
Press or until the arrow points to
“
Program
”
.
3
Press OK .
4
Press or until the arrow points to
“
Setting Base
”
.
5
Press OK .
•
“
Input Command
” is displayed.
6
Press
3
.
7
Enter the base unit password.
• The factory preset is 0000. To change the base unit
password.
8
Press
1
.
• The current mode is displayed.
1: Tone
2: Pulse
Ex. Tone is selected.
9
To select Pulse, press
2
.
O R
To select Tone, press
1
.
10
Press OK .
• A confirmation tone sounds.
• The display will return to “
Setting Base
”
.
To return to the stand-by mode, press
C
or wait
for 60 seconds.
• If 5 beeps sound in step 7, the entered password is
incorrect. Enter the correct password.
• You can exit the programming mode any time by
pressing
C
.
(KX-TCD955EC)
Input Command
3 ----
Input Command
31 1
KX-TCD951EB/KX-TCD955EC
10
O P E R ATION
MAKING CALLS
TURNING THE POWER ON
Press
PWR
.
•
After all possible configurations briefly appear, the display will change to the following. Then the handset is in the
stand-by mode.
The current connected base unit number is displayed. (KX-TCD951EB only)
(KX-TCD951EB)
(KX-TCD955EC)
• You can choose whether to display the base unit number, handset number or no display in the stand-by mode by
programming.
To turn the power OFF, press and hold
PWR
until a beep sounds.
• The display will go blank.
• The handset will not ring.
• Depending on the programming mode, you may not be able to turn the power off. First make sure the handset is set to the
stand-by mode.
Make sure that the power is ON.
1
P ress
.
•
"
" is displayed. (KX-TCD955EC only)
2
Dial a phone number.
• The dialed number is displayed.
(KX-TCD951EB)
(KX-TCD955EC)
3
To hang up, press
or place the handset on the base unit.
•
The handset will return to the stand-by mode.
1 The number of new Caller ID calls received.
2 The current connected base unit number.
1
2
0 New Calls
Base 1
•
After a few seconds, the display will start showing the length of the call.
12345678
00-00-00
11
KX-TCD951EB/KX-TCD955EC
TO DIAL AFTER CONFIRMING THE ENTERED NUMBER
With this feature you are able to confirm the entered number, before you start dialing.
1
Enter a phone number.
• The entered number is displayed.
• If you misdial, press
C
(
). Digits are erased from the right.
• To cancel, press
C
(
) firmly.
• If your line has rotary or pulse service, any access numbers entered after pressing
(KX-TCD951EB),
(KX-TCD955EC) will not be included when dialling.
2
Press
.
•
“
” is displayed. (KX-TCD955EC only)
• After a few seconds, the display will start showing the length of the call.
3
To hang up, press
or place the handset on the base unit.
• The handset will return to the stand-by mode.
• If “
” flashes and an alarm tone sounds after pressing
, move closer to the base unit. Then try again.
• You can choose whether to display the length of the call, call charge or phone number in the talk mode by programming.
1
Press
.
2
Press
F
.
3
While “
Redial
” is at the arrow, press OK .
• The last number dialed is automatically redialed.
TO REDIAL THE LAST NUMBER DIALLED
(KX-TCD951EB)
(KX-TCD955EC)
Press
RDL
.
• The last number dialed is automatically redialed.
1
Press
F
.
2
While “
Redial
” is at the arrow, press OK .
• The last number dialed is displayed.
3
Press or
until the desired number is displayed.
• To search from the most recent to oldest number, press
. To search from the oldest to most recent number,
press
.
• When the number at the top of the redial memory is
displayed, two beeps will sound.
• To exit the list, press
C
.
4
Press
.
• The number is dialed automatically.
• If “
No Stored Memory
” is displayed in step 2, the redial
memory is empty.
• If the same phone number is stored in the phonebook, the
name will be displayed.
TO REDIAL AFTER CONFIRMING THE NUMBERS IN REDIAL MEMORY
The unit automatically stores the last 10 numbers dialed into redial memory.
(KX-TCD951EB)
(KX-TCD955EC)
1
Press
RDL
.
• The last number dialed is displayed.
2
Select the desired number by pressing
RDL
.
• You can also search from the most recent to oldest
number by pressing
. To search from the oldest to
most recent number, press
.
•
“
” denotes the end of redial memory.
• To exit the list, press
C
firmly.
3
Press
.
• The number is dialed automatically.
Redial
Caller ID
New Phonebook
Redial
Go Back
KX-TCD951EB/KX-TCD955EC
12
SETTING THE RECEIVER VOLUME
TO SELECT THE RECEIVER VOLUME
3 levels (HIGH, MEDIUM, LOW) are available. The factory preset is MEDIUM.
While talking, press
or to select the desired level.
•
The display shows the volume level.
Ex. LOW is selected.
(KX-TCD951EB)
(KX-TCD955EC)
•
After a few seconds, the display will return to the length of the call.
O R
In the stand-by mode, proceed as follows.
ANSWERING CALLS
Make sure that the power is ON, otherwise the handset will not ring.
(KX-TCD951EB)
(KX-TCD955EC)
1
If the handset is off the base unit, press
.
•
You can also answer a call by pressing any dialing
button
0
to
9
,
or
(-Any Key Talk).
O R
If on the base unit, just lift up.
•
The handset and base unit will not ring if both ringer
volumes are set to OFF.
If you subscribe to a Caller ID service, the calling party
information will be displayed after the first ring. In order to
view the Caller ID information, please wait until the second
ring to answer a call.
1
Press
.
•
You can also answer a call by pressing any dialing
button
0
to
9
,
or
(—Any Key Talk).
2
To hang up, press
or place the handset on the
base unit.
•
The handset and base unit will not ring if both ringer
volumes are set to OFF.
1 Press
PROG
.
2 Press or
until "
" is displayed, then press
OK
.
• The current level is displayed.
Ex. LOW is selected.
3 Press or
to select the desired level.
4 Press
PROG
.
Receiver Volume
LOW HIGH
1 Press
F
.
2 Press
or
until the arrow points to "
Program
", then
press OK .
3 Press
or
until the arrow points to "
Receiver
Volume
", then press OK .
4 Press or
to select the desired level.
5 Press OK .
•
The display will return to "
Receiver Volume
". To return
to the stand-by mode, press
C
or wait for 60 seconds.
Click on the first or last page to see other KX-TCD951EB / KX-TCD955EC service manuals if exist.