Panasonic KX-TCD500RUN / KX-TCA150RUN Service Manual ▷ View online
9 DISASSEMBLY INSTRUCTIONS
9.1. Base Unit
Shown in Fig.-
To Remove
Remove
1
Lower Cabinet
Screws (2.6 × 12)..........(A) × 2
2
Main P.C. Board
Main P.C. Board
17
KX-TCD500RUN / KX-TCA150RUN
9.2. Handset
Shown in Fig.-
To Remove
Remove
3
Lower Cabinet
Screws (2 × 10)..........(B) × 2
4
Follow the procedure.
5
Main P.C. Board
Screw (2 × 8)..............(C ) × 1
Screws (2 × 8).............(D ) × 2
Main P.C. Board
Screws (2 × 8).............(D ) × 2
Main P.C. Board
18
KX-TCD500RUN / KX-TCA150RUN
10 ASSEMBLY INSTRUCTIONS
10.1. Warning When Constructing the Base Unit
CHG terminal comes out of rib by pulling black lead wire when opening the cabinet and turning
the PCB over. The terminal cannot have enough elastic force, cannot have good contact with
handset, and it will result in charge problem.
the PCB over. The terminal cannot have enough elastic force, cannot have good contact with
handset, and it will result in charge problem.
OK
NG
Rib
CHG terminal is properly fit in the cabinet.
19
KX-TCD500RUN / KX-TCA150RUN
Flow Chart
Cross Reference:
Check Power (P.21)
Bell Reception (P.28)
Check Battery Charge (P.22)
Check Link (P.23)
Check Handset Transmission (P.27)
Check Handset Reception (P.27)
SIGNAL ROUTE (P.49)
11 TROUBLESHOOTING GUIDE
20
KX-TCD500RUN / KX-TCA150RUN
Click on the first or last page to see other KX-TCD500RUN / KX-TCA150RUN service manuals if exist.