Panasonic KX-TC1019RUB Service Manual ▷ View online
23.6. Check Link
Base Unit
53
KX-TC1019RUB
Portable Unit
54
KX-TC1019RUB
Base Unit
Portable Unit
23.7. Bell Reception
23.8. Initial Set-up after Replacing EEPROM
<Important>
When EEPROM is replaced, following procedure is required to initialize the contents of the EEPROM.
1. BASE UNIT
a. Set the BASE UNIT to the test mode.
b. Turn the BASE UNIT OFF.
c.
Write the ID CODE according to the ID CODE label on the BASE UNIT.
d. Turn the BASE UNIT OFF.
e. Make sure the contents of the EEPROM
•
ID CODE: It should be linked with the PORTABLE UNIT.
•
DIAL MODE: TONE
•
FLASH time: 700 msec
2. PORTABLE UNIT
a. Set the PORTABLE UNIT to the test mode.
b. Turn the PORTABLE UNIT OFF.
c.
Write the ID CODE according to the ID CODE label on the PORTABLE UNIT.
d. Turn the PORTABLE UNIT OFF.
e. Make sure the contents of the EEPROM
•
ID CODE: It should be linked with the BASE UNIT.
55
KX-TC1019RUB
24 CABINET AND ELECTRICAL PARTS LOCATION (BASE
UNIT)
56
KX-TC1019RUB
Click on the first or last page to see other KX-TC1019RUB service manuals if exist.