Panasonic AG-HVX200P / AG-HVX200AN / AG-HVX200E / AG-HVX200MC / AG-HVX202EN Service Manual ▷ View online
INF-19
8-1. DIAGNOSTIC MENU
8-1-1. How to display the Error Rate.
This unit can be displayed Error Rate and it shows the playing condition of the VCR.
In case of the error rate is displayed, BER DISPLAY and SAMPLE SPEED mode is select on DIAGNOSTIC menu.
In case of the error rate is displayed, BER DISPLAY and SAMPLE SPEED mode is select on DIAGNOSTIC menu.
How to confirm the Error rate.
1. Select the TOTAL in item of BER DISPLAY.
2.
Record the color bar signal on LP mode and playback the recorded portion. Confirm that the number of bar on
display within 10 bars or less. The less bars displayed the better the error rate (LP mode can be set by item
REC SPEED in RECORDING SETUP menu).
REC SPEED in RECORDING SETUP menu).
When selecting TOTAL in BER DISPLAY
mode, it is displayed “TOT” and if select
VIDEO, it is displayed “VID” and if select
AUDIO, it is displayed “AUD”.
mode, it is displayed “TOT” and if select
VIDEO, it is displayed “VID” and if select
AUDIO, it is displayed “AUD”.
TOT
The color of the bar
In case of white display: Error rate is good
In case of red display: Error rate is bad
In case of white display: Error rate is good
In case of red display: Error rate is bad
CH1
CH2
TOT
CH1
CH2
DIAGNOSTIC MENU
BER DISPLAY
SAMPLE SPEED
EEPROM VERSION
CYLINDER
TAPE RUN
THREADING
1394 DIAG
1394 UID
PUSH MENU TO RETURN
DIAGNOSTIC MENU
BER DISPLAY
SAMPLE SPEED
EEPROM VERSION
CYLINDER
TAPE RUN
THREADING
1394 DIAG
1394 VID
PUSH MENU TO RETURN
OFF
VIDEO
AUDIO
TOTAL
AUDIO
TOTAL
SLOW
FAST
Select the item BER DISPLAY and press
SET(STILL) button.
Select VIDEO, AUDIO or TOTAL by PLAY or
STOP button and press SET(STILL) button.
Factory default setting is “OFF”.
SET(STILL) button.
Select VIDEO, AUDIO or TOTAL by PLAY or
STOP button and press SET(STILL) button.
Factory default setting is “OFF”.
After selecting BER DISPLAY mode, move to
item of SAMPLE SPEED by press PLAY or
STOP button
item of SAMPLE SPEED by press PLAY or
STOP button
The Audio Level Meter is change to error rate
display, when returning to the normal screen.
NOTE:
The display screen is changed only in the
TAPE-VCR mode.
display, when returning to the normal screen.
NOTE:
The display screen is changed only in the
TAPE-VCR mode.
OFF
SLOW
----
10000H
10000H
10000H
10000T
----
----
----
TOTAL
SLOW
----
10000H
10000H
10000H
10000T
----
----
----
Select SLOW or FAST by PLAY or STOP
button and press SET(STILL) button.
Factory default setting is “SLOW”.
button and press SET(STILL) button.
Factory default setting is “SLOW”.
INF-20
8-1-2. Software Version Display.
Each software version can be confirm at item “SOFT VERSION” and “EEPROM VERSION” in DIAGNOSTIC
menu.
Type
Name on display
Ref No.
Board
CAM MICON
IP504
CAMERA
SYS MICON
IP305
CODEC
VCR MICON
IP1(VTR MAIN MICON)
VTR
Microprocessor
VCR DUO
IC9(VTR SUB MICON)
VTR
P2CS OS
P2CS AP
P2CS AP
IP202(SH4)
IP203(SH4)
IP203(SH4)
CODEC
CAM FPGA
IP100(TG FPGA)
CAMERA
FLASH
SYS FPGA
IP706(OSD FPGA)
CODEC
CAM IP500 CAMERA
SYS IP306
SYS IP306
CODEC
EEPROM
VCR IP2 VTR
SOFT VERSION
DIAGNOSTIC MENU
SOFT VERSION
EEPROM VERSION
CYLINDER
TAPE RUN
THREADING
1394 DIAG
1394 UID
PUSH MENU TO RETURN
----
YES
Select YES and press SET(STILL) button to
move the SOFT VERSION display screen.
move the SOFT VERSION display screen.
SOFT VERSION
CAM MICON :
1.12-00-0.00
SYS MICON :
0.26-15-0.02
VCR MICON :
1.1A-00-0.00
VCR DUO
:
1.10-00-0.00
PSCS OS
:
1.10-00-0.00
PSCS AP
:
1.10-00-0.00
CAM FPGA :
1.10-00-0.00
SYS FPGA :
1.10-00-0.00
PUSH MENU TO RETURN
----
----
----
10000H
10000H
10000H
10000T
----
----
----
Only as for the TAPE-CAMERA mode,
the version number is displayed.
the version number is displayed.
Only as for the P2-CAMERA mode,
the version number is displayed.
the version number is displayed.
INF-21
EEPROM VERSION
8-1-3. Hour Meter Display.
ITEM Display
Data
Description
TAPE RUN
00000H
–
99999H
It displays the time that the tape is running in units of hours.
THREADING 00000T
–
99999T
It displays the number of times the tape is inserted.
CYLINDER 00000H
–
99999H
It displays the time that the cylinder is rotating in units of hours.
It displays same time as in the item HOUR METER of OTHER
FUNCTION menu.
It displays same time as in the item HOUR METER of OTHER
FUNCTION menu.
DIAGNOSTIC MENU
SOFT VERSION
EEPROM VERSION
CYLINDER
TAPE RUN
THREADING
1394 DIAG
1394 UID
PUSH MENU TO RETURN
----
YES
Select YES and press SET(STILL) button to
move the EEPROM VERSION display screen.
move the EEPROM VERSION display screen.
EEPROM VERSION
CAM :
1.12-00-0.00
SYS :
0.26-15-0.02
VCR :
1.1A-00-0.00
VCR CHKSUM :
D6D4
PUSH MENU TO RETURN
DIAGNOSTIC MENU
SOFT VERSION
EEPROM VERSION
CYLINDER
TAPE RUN
THREADING
1394 DIAG
1394 UID
PUSH MENU TO RETURN
----
----
----
10000H
10000H
10000H
10000T
----
----
----
----
----
----
10000H
10000H
10000H
10000T
----
----
----
TAPE RUN, THREADING are displayed in
addition to the rotating time of the Cylinder
(CYLINDER).
addition to the rotating time of the Cylinder
(CYLINDER).
This indicates the value of the check sum value of the
VTR EEPROM displayed in hexadecimal.
Only as for the TAPE mode, the version number is
displayed.
VTR EEPROM displayed in hexadecimal.
Only as for the TAPE mode, the version number is
displayed.
Only as for the TAPE mode, the version number is displayed.
INF-22
8-1-4. 1394 DIAG Display.
Items Description
Remark
NODE CNT
Number of NODE connections.
MY_ID
NODE ID of this unit.
ROOT_ID ROOT
ID
IRM_ID
PHY ID of IRM
IRM(Isochronous Resonance Manager)
RCV_ID
PHY ID of the equipment which is transmitting
the data to be receiving of this unit.
the data to be receiving of this unit.
GAP CNT
Current gap count value
8-1-5. 1394 UID Display.
1394 UID screen is indicate 3 kinds of ID product number P2, SBP2 and TAPE.
DIAGNOSTIC MENU
SOFT VERSION
EEPROM VERSION
CYLINDER
TAPE RUN
THREADING
1394 DIAG
1394 UID
PUSH MENU TO RETURN
----
YES
Select YES and press SET(STILL) button to
move the 1394 DIAG display screen.
Factory default setting is “----”.
move the 1394 DIAG display screen.
Factory default setting is “----”.
DIAGNOSTIC MENU
SOFT VERSION
EEPROM VERSION
CYLINDER
TAPE RUN
THREADING
1394 DIAG
1394 UID
PUSH MENU TO RETURN
----
YES
Select YES and press SET(STILL) button to
move the 1394 UID display screen.
Factory default setting is “----”.
move the 1394 UID display screen.
Factory default setting is “----”.
----
----
----
10000H
10000H
10000H
10000T
----
----
----
----
----
----
10000H
10000H
10000H
10000T
----
----
----
1394 UID
P2 : 0080458200000002
SBP2: 0080458200000001
TAPE: 0080458201020304
PUSH MENU TO RETURN
Click on the first or last page to see other AG-HVX200P / AG-HVX200AN / AG-HVX200E / AG-HVX200MC / AG-HVX202EN service manuals if exist.