Panasonic AG-DVX100BP / AG-DVX100E / AG-DVX100BE / AG-DVX100AN / AG-DVX102BEN / AG-DVC180BMC Service Manual ▷ View online
INF-13
5-2-2. Other item.
5-3. ADJUST MENU (VCR mode)
NOTE: Please do not change the setting of the items of “DEBUG DISP” and “DEBUG MODE”. These items
are for factory use only.
DIAGNOSTIC MENU
BER DISPLAY OFF
SAMPLE SPEED SLOW
DIF INFO OFF
CYLINDER 10000H
TAPE RUN 10000H
THREADING 10000T
PUSH MENU TO EXIT
These items are displayed even by the CAMERA
SERVICE menu. (refer to item 5-1-3 and 5-1-5. )
SERVICE menu. (refer to item 5-1-3 and 5-1-5. )
ADJUST MENU
ATF GAIN OFF
LINEARITY OFF
AUDIO FILTER ON
Y LEVEL 1B
C LEVEL 27
DEBUG DISP OFF
DEBUG MODE OFF
LCD OFFSET OFF
C LEVEL 27
DEBUG DISP OFF
DEBUG MODE OFF
LCD OFFSET OFF
PUSH MENU TO EXIT
Setting item for LISTA Measurement
These items are displayed even by
the CAMERA SERVICE menu.
(refer to item 5-1-1 and 5-1-4. )
the CAMERA SERVICE menu.
(refer to item 5-1-1 and 5-1-4. )
ADJUST MENU
EVF OFFSET OFF
PUSH MENU TO EXIT
These items are displayed even by
the CAMERA SERVICE menu.
(refer to item 5-1-6. )
the CAMERA SERVICE menu.
(refer to item 5-1-6. )
INF-14
5-3-1. Setting item for LISTA Measurement
ATF GAIN
The speed of the tape changes if this item set to “ON” for the ATF sensitivity confirmation.
After selected “ON”, By pressing SET(STILL) of OPERATION LEVER, enter the adjustment mode and then exit the
The speed of the tape changes if this item set to “ON” for the ATF sensitivity confirmation.
After selected “ON”, By pressing SET(STILL) of OPERATION LEVER, enter the adjustment mode and then exit the
menu once. The VTR mode is operated when the menu mode is exited temporarily. The screen below is displayed.
NOW SERVO ADJUST
PUSH MENU TO RETURN
It will be returned to ADJUST MENU when the MENU button is pressed in this condition.
LINEARITY
The ATF sensitivity changes if this item set to “ON” for the LINEARITY confirmation.
After selected “ON”, By pressing SET(STILL) of OPERATION LEVER, enter the adjustment mode and then exit the
LINEARITY
The ATF sensitivity changes if this item set to “ON” for the LINEARITY confirmation.
After selected “ON”, By pressing SET(STILL) of OPERATION LEVER, enter the adjustment mode and then exit the
menu once. The VTR mode is operated when the menu mode is exited temporarily. The screen below is displayed.
NOW SERVO ADJUST
PUSH MENU TO RETURN
It will be returned to ADJUST MENU when the MENU button is pressed in this condition.
Press MENU button.
After selected “ON”, By pressing SET(STILL) of OPERATION LEVER
NOW SERVO ADJUST
PUSH MENU TO RETURN
(Adjustment mode screen)
ADJUST MENU
ATF GAIN OFF
LINEARITY OFF
AUDIO FILTER ON
Y LEVEL 1B
C LEVEL 27
DEBUG DISP OFF
DEBUG MODE OFF
LCD OFFSET OFF
C LEVEL 27
DEBUG DISP OFF
DEBUG MODE OFF
LCD OFFSET OFF
PUSH MENU TO EXIT
OFF
ON
INF-15
6. EEPROM
Several information are stored in EEPROM. Please refer to below explanation, which data stored in EEPROM.
6-1. Each Menu Data
6-1-1. Setting menu data
n : Each setting value are stored in VTR EEPROM.
▲ : Each setting value are stored in CAMERA EEPROM.
NOTE1: The item “PROGRESSIVE” and “NAME EDIT” in SCENE FILE screen, which is stored in VTR EEPROM.
NOTE2: The item “Aspect CONV” in CAMERA SETUP screen, which is stored in VTR EEPROM.
NOTE1: The item “PROGRESSIVE” and “NAME EDIT” in SCENE FILE screen, which is stored in VTR EEPROM.
NOTE2: The item “Aspect CONV” in CAMERA SETUP screen, which is stored in VTR EEPROM.
6-1-2. SERVICE menu data
Please refer to as follows.
ITEM STORED
IN
DEFECT COMP
X
AUDIO FILTER
VTR EEPROM
VTR SUB MICON
VTR SUB MICON (IC3001)
VTR MAIN MICON
VTR MAIN MICON (IC2001)
VTR EEPROM
VTR EEPROM
VTR EEPROM SUM
VTR EEPROM
CAM MICON
CAM MICON (IC301)
CAM EEPROM
CAM EEPROM
CYLINDER VTR
EEPROM
TAPE RUN
VTR EEPROM
THREADING VTR
EEPROM
Y LEVEL
VTR EEPROM
C LEVEL
VTR EEPROM
DIF INFO
X
DEBUG DISP
X
DEBUG MODE
X
LCD OFFSET
VTR EEPROM
EVF OFFSET
VTR EEPROM
n
n
n
n
n
Common display items
▲
▲
▲
▲
n
▲
▲
▲
n
n
n
CAMERA MENU
1. SCENE FILE
2. CAMERA SETUP
3. SW MODE
4. AUTO SW
5. RECORDING SETUP
6. DISPLAY SETUP
7. OTHER FUNCTIONS
PUSH MENU TO EXIT
VCR FUNCTIONS
1. PLAYBACK FUNCTIONS
2. RECORDING SETUP
3. AV IN/OUT SETUP
4. DISPLAY SETUP
5. OTHER FUNCTIONS
PUSH MENU TO EXIT
INF-16
6-1-3. DIAGNOSTIC menu data
Please refer to as follows.
ITEM STORED
IN
BER DISPLAY
X
SAMPLE SPEED
X
DIF INFO
X
CYLINDER VTR
EEPROM
TAPE RUN
VTR EEPROM
THREADING VTR
EEPROM
6-1-4. ADJUST menu data
Please refer to as follows.
ITEM STORED
IN
ATF GAIN
X
LINEARITY X
AUDIO FILTER
AUDIO FILTER
X
Y LEVEL
VTR EEPROM
C LEVEL
VTR EEPROM
DEBUG DISP
X
DEBUG MODE
X
LCD OFFSET
VTR EEPROM
EVF OFFSET
VTR EEPROM
6-1-5. The other data
Except setting menu data, below indicated information are stored in EEPROM.
EEPROM INFORMATION
REMARK
CAMERA adjustment value
Adjustment values are set by EVR software.
CAMERA EEPROM
Control data
------------------
VTR adjustment Value
Adjustment values are set by EVR software or
SERVCE/ADJUST menu.
SERVCE/ADJUST menu.
HOUR METER
------------------
Time code data
------------------
VTR EEPROM
Control data
------------------
Click on the first or last page to see other AG-DVX100BP / AG-DVX100E / AG-DVX100BE / AG-DVX100AN / AG-DVX102BEN / AG-DVC180BMC service manuals if exist.