Panasonic PT-VZ575N / PT-VZ575ND / PT-VZ575NT / PT-VW535N / PT-VW535ND / PT-VW535NT / PT-VX605N / PT-VX605ND / PT-VX605NT Service Manual ▷ View online
DIS-3
SECTION 2 DISASSEMBLY PROCEDURES
1.3. Mechanical parts location
1.4. Optical parts location
DEC dial
Top cover unit
Lamp cover
Teminal cover
Lamp unit
Bottom case
G-Polarizer
B-Polarizer
Lighting case top
Lighting case bottom
Prism beam
splitter(PBS)
splitter(PBS)
Iris unit
Integrator
lens-out
lens-out
Integrator
lens-in
lens-in
R-Polarizer
Lens shift unit *
Projection lens *
Optical block *
Power box
Lens ring
Lens cap
Air filter unit
Filter cover
Duct assy
Lighting block
* Projection lens, lens shift unit and optical block are not supplied separately for PT-VZ575N. Only they will be
supplied as an assemblied one parts.
DIS-4
SECTION 2 DISASSEMBLY PROCEDURES
2. Mechanical and Electrical Parts Disassembly
2.1. Disassembly flow chart
* Before Disassembly the projector, turn the projectir off and disconnect the power plug from the wall outlet.
* To assemble, reverse the disassembly procedures.
* When tore off sticky tapes, please use a new thing without reusing it on the occasion of assembling.
2.10. Intake fan removal
Cable reforming
2.9. Top panel duct assy removal
2.8. Power box assy removal
2.7. Lighting assy removal
2.6. Lamp house and lamp duct assy removal
2.5.1 [NT]-P.C.Board, [WL]-P.C.Board removal
2.5. [A]-P.C.Board unit removal
2.4. Top cover unit removal
2.2. Air filter cover,air filter unit removal
2.3. Lamp unit and lamp cover removal
Completed Product
DIS-5
SECTION 2 DISASSEMBLY PROCEDURES
2.2. Air filter cover, air filter unit removal
1. Open the air filter cover then remove it.
2. Hold the tab of the air filter unit and pull out whole air filter unit.
2.3. Lamp unit and lamp cover removal
1. Loosen 1 screw-A and remove the lamp cover to upward.
2. Loosen 3 screws-B on the lamp unit and pull it upward off.
B
B
B
A
A
SMXAA308R0SAA
B
THEC239N
Lamp unit
Lamp cover
Air filter unit
Air filter cover
DIS-6
SECTION 2 DISASSEMBLY PROCEDURES
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
2.4. Top cover unit removal
1. Remove 15 screws-A and take the top cover unit upward off.
2. Remove 1 screw-B and take the lens ring .
A
B
SFPDN30100SA-
2.5. [A]-P.C.Board unit removal
1. Remove 2 screws-A and 3 screws-B and remove [A]-P.C.Board unit.
2. Remove 1 screw-C and remove holder dial upward off.
A
C
A
B
B
B
A
XYN3+F6FJ
B
XYC3+FG10FJK
C
SFPDN308R0SV-
Top cover unit
DEC_sheet _RC
DEC dial
Lens ring
[A]-P.C.Board unit
[R]-P.C.Board unit
Holder dial
Click on the first or last page to see other PT-VZ575N / PT-VZ575ND / PT-VZ575NT / PT-VW535N / PT-VW535ND / PT-VW535NT / PT-VX605N / PT-VX605ND / PT-VX605NT service manuals if exist.