Panasonic PT-VZ570 / PT-VZ570D / PT-VZ570T / PT-VW530 / PT-VW530D / PT-VW530T / PT-VX600 / PT-VX600D / PT-VX600T / PT-VX60 Service Manual ▷ View online
INF-7
SECTION 1 SERVICE INFORMATION
Note
f
Pressing the <MENU> button or <RETURN> button while the menu screen is displayed returns to the previous menu.
f
Some items may not be adjusted or used for certain signal formats to be input to the projector. The menu items that cannot
be adjusted or used are shown in gray characters, and they cannot be selected. [DIGITAL CINEMA REALITY] and [FRAME
LOCK] may not be displayed depending on the input signal.
f
Some items can be adjusted even if signals are not input.
f
Individual adjustment screen is cleared automatically if no operation is performed for approximately five seconds.
f
For menu items, refer to “Main menu” (
Æ
page 47) and “Sub menu” (
Æ
page 47).
Resetting adjustment values to the factory default
If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to the factory
default settings.
button
1) Press the <DEFAULT> button on the remote control.
Note
f
You cannot reset all the settings to the factory default at a time.
f
To reset all the settings adjusted in the sub-menu item to the factory default at a time, execute the [PROJECTOR SETUP]
menu → [INITIALIZE ALL]. (
Æ
page 76)
f
Some items cannot be reset by pressing the <DEFAULT> button. Adjust each item manually.
Main menu
The main menu consists of the following 7 menu items.
When a main menu item is selected, the screen changes to a submenu selection screen.
Main-menu item
Page
[PICTURE]
50
[POSITION]
55
[LANGUAGE]
63
[DISPLAY OPTION]
64
[PROJECTOR SETUP]
70
[SECURITY]
77
[NETWORK]
80
Sub menu
The sub-menu screen of the selected main menu appears, and you can set and adjust the various items in the submenu.
[PICTURE]
Sub-menu item
Factory default
Page
[PICTURE MODE]
[STANDARD]*
1
50
[CONTRAST]
[0]
50
Chapter 4 Settings - Menu Navigation
ENGLISH - 47
INF-8
SECTION 1 SERVICE INFORMATION
Sub-menu item
Factory default
Page
[BRIGHTNESS]
[0]
50
[COLOR]*
2
[0]
51
[TINT]*
2
[0]
51
[SHARPNESS]
[8]
51
[COLOR TEMPERATURE]
[DEFAULT]
51
[IRIS]
[ON]
52
[ADVANCED MENU]
-
52
[DAYLIGHT VIEW]
[AUTO]
52
[DIGITAL CINEMA REALITY]*
2
[ON]
53
[NOISE REDUCTION]*
3
[OFF]
53
[TV-SYSTEM]*
3
[AUTO]
53
[RGB/YP
B
P
R
] / [RGB/YC
B
C
R
]*
4
[AUTO]
53
*1 It may be different depending on the input signal.
*2 Only for movie-based signals.
*3 Only when the <VIDEO IN> terminal is selected.
*4 Only when the <COMPUTER 1 IN> / <COMPUTER 2 IN/1 OUT> / <HDMI 1 IN> / <HDMI 2 IN> terminal is selected.
Note
f
The factory default settings may vary depending on the picture mode.
[POSITION]
Sub-menu item
Factory default
Page
[REALTIME KEYSTONE]
[ON]
55
[SCREEN ADJUSTMENT]
-
55, 57
[SHIFT]
-
60
[DOT CLOCK]*
1
[0]
61
[CLOCK PHASE]*
1
[0]
61
[OVER SCAN]
-
61
[ASPECT]
-
61
[FRAME LOCK]*
1
[OFF]
62
*1 Only for still image signals.
[LANGUAGE]
Details (Æ page 63)
[DISPLAY OPTION]
Sub-menu item
Factory default
Page
[ON-SCREEN DISPLAY]
-
64
[HDMI SIGNAL LEVEL]
[AUTO]
65
[CLOSED CAPTION SETTING]
-
65
[SCREEN SETTING]
-
66
[STARTUP LOGO]
[DEFAULT LOGO]
67
[AUTO SETUP SETTING]
[AUTO]
67
[SIGNAL SEARCH]
[ON]
67
[BACK COLOR]
[BLUE]
67
[WIDE MODE]
-
68
[SXGA MODE]
-
68
[P-TIMER]
-
68
[OTHER FUNCTIONS]
-
69
[PROJECTOR SETUP]
Sub-menu item
Factory default
Page
[STATUS]
-
70
[COMPUTER1 INPUT SETTING]
[RGB/YP
B
P
R
]
70
[COMPUTER2 SELECT]
[COMPUTER2 IN]
70
[PROJECTOR ID]
[ALL]
71
Chapter 4 Settings - Menu Navigation
48 - ENGLISH
INF-9
SECTION 1 SERVICE INFORMATION
Sub-menu item
Factory default
Page
[INITIAL START UP]
[LAST MEMORY]
71
[PROJECTION METHOD]
[FRONT/DESK]
71
[LAMP POWER]
[NORMAL]
71
[ECO MANAGEMENT]
-
72
[EMULATE]
[DEFAULT]
73
[FUNCTION BUTTON]
-
73
[AUDIO SETTING]
-
74
[TEST PATTERN]
-
75
[FILTER COUNTER]
-
76
[INITIALIZE ALL]
-
76
[SECURITY]
Sub-menu item
Factory Default
Page
[PASSWORD]
[OFF]
77
[PASSWORD CHANGE]
-
77
[TEXT DISPLAY]
[OFF]
78
[TEXT CHANGE]
-
78
[MENU LOCK]
[OFF]
78
[MENU LOCK PASSWORD]
-
78
[CONTROL DEVICE SETUP]
-
79
[NETWORK]
Sub-menu item
Factory default
Page
[WIRED LAN]
-
80
[NAME CHANGE]
-
80
[NETWORK CONTROL]
[ON]
81
[AMX D. D.]
[OFF]
81
[Crestron Connected(TM)]
[OFF]
81
[STATUS]
-
81
[INITIALIZE]
-
81
Note
f
Some items may not be adjusted or used for certain signal formats to be input to the projector.
The menu items that cannot be adjusted or used are shown in gray characters, and they cannot be selected.
f
Sub-menu items and factory default settings differ depending on the selected input terminal.
Chapter 4 Settings - Menu Navigation
ENGLISH - 49
INF-10
SECTION 1 SERVICE INFORMATION
3. Service Mode
This projector has Service Mode in addition to standard on-screen menus (User Mode).
This mode enables some menu settings for the service operation.
3. 1. Setting to Service Mode
1. Press the [MENU] button on the control panel of the projector or on the remote controller to display the main menu on the
screen.
2. Select a sub menu "ON-SCREEN DISPLAY" of the main menu "DISPLAY OPTION".
3. Select a sub menu "INPUT GUIDE" and press the [ENTER] button for more than 3 seconds. The projector set into the
service mode and the "EXTRA OPTION" menu will be displayed on the screen.
3. 2. Cancelling the Service Mode
1. In the service mode, press the [MENU] button on the control panel of the projector or on the remote controller to cancel the
service mode. The menu of "Use mode" will be displayed.
3. 3. Functions of Service Mode
* Function varies according to a version of the main microcomputer software.
3. 3. 1. EXTRA OPTION
"EXTRA OPTION" menu will be displayed.
(;75$237,21
)5((=(0(66$*(
21
)$1)8//02'(
2))
9*$3
$872
(08/$7(
%$8'5$7(
%$8'5$7(
9(56,21
0$
,13876(/(&7
6(/)&+(&.
7(673$77(51
)/,&.(5$'-867
02'(/126(77,1*
3$1(/7<3(6(77,1*
6(/)&+(&.
7(673$77(51
)/,&.(5$'-867
02'(/126(77,1*
3$1(/7<3(6(77,1*
/
,1387$872&$/,%5$7,21
:+,7(%$/$1&($'-867
.(<6721(&$/,%5$7,21
&/2*6(1625&$/,%5$5,21
5*%3,;(/$'-867
*+267)%&$/,%5$7,21
:+,7(%$/$1&($'-867
.(<6721(&$/,%5$7,21
&/2*6(1625&$/,%5$5,21
5*%3,;(/$'-867
*+267)%&$/,%5$7,21
1.
2.
3.
4.
5.
6.
3.
4.
5.
6.
7.
8.
9.
9.
10.
11.
12.
13.
14.
15.
16.
13.
14.
15.
16.
17.
18.
Click on the first or last page to see other PT-VZ570 / PT-VZ570D / PT-VZ570T / PT-VW530 / PT-VW530D / PT-VW530T / PT-VX600 / PT-VX600D / PT-VX600T / PT-VX60 service manuals if exist.