Panasonic PT-VMZ60 / PT-VMZ50 / PT-VMZ40 / PT-VMW60 / PT-VMW50 (serv.man3) Service Manual ▷ View online
DIS-10
SECTION 2 DISASSEMBLY PROCEDURE
<VMZ60/VMZ50/VMZ40/VMW60/VMW50>
A
B
2.5.1. POWER fan removal
1. Remove 4 screws-A and take the POWER fan.
2. Remove 1 screw-B to remove the M3-PCB.
2.5. Power box and K-PCB/Inlet removal
1. Remove 5 screws-A to remove the Power box block.
2. Remove 2 screws-B and remove the K-PCB and AC Inlet.
A
B
B
B
A
A
A
A
A
A
A
A
A
B
K-PCB
Power box block
AC inlet
POWER fan
M3-PCB
DIS-11
SECTION 2 DISASSEMBLY PROCEDURE
<VMZ60/VMZ50/VMZ40/VMW60/VMW50>
2.5.2. P1-PCB removal
1. Remove 6 screws-C and take the P1-PCB downward off.
2.5.3. D-PCB removal
1. Remove 2 screws-D and take the power metal-3 off.
2. Remove 6 screws-E and take the D-PCB and power metal-1 assy off.
3. Remove 4 screws-F to remove the D-PCB.
C
C
C
C
C
C
D
D
E
E
E
E
E
E
F
F
F
F
P1-PCB
C
D
E
F
D-PCB
Power metal-3
Power metal-1
DIS-12
SECTION 2 DISASSEMBLY PROCEDURE
<VMZ60/VMZ50/VMZ40/VMW60/VMW50>
2.5.4. P2-PCB removal
1. Remove 5 screws-G to remove the P2-PCB from the power metal-2.
G
G
G
G
G
2.6. S-PCB, LD duct top, LD fan removal
1. Remove each 1 screw-A and remove the shift knob assy.
2. Remove 3 screws-B to take the S-PCB.
3. Remove 5 screws-C and take the LD duct top upward off.
4. Remove 2 screws-D to take the LD fan assy, and remove 3 screws-E
to take the LD fan.
A
A
B B
C
C
C
D D
E
E
E
C
C
B
A
C
B
D
E
Power metal-2
P2-PCB
G
Knob bracket
Shift knob
Knob idler
Spacer
S-PCB
LD duct top
LD fan
DIS-13
SECTION 2 DISASSEMBLY PROCEDURE
<VMZ60/VMZ50/VMZ40/VMW60/VMW50>
2.8. LD case block removal
1. Remove 2 screws-A, 3 screws-B and take the LD case block upward off.
A
A B
B
B
A
B
LD case block
A
A
B
B
Adjuster leg
LD unit block
A
B
2.7. Disassembling order of LD unit replacement
1. Remove the Filter cover following to step 2.1.
2. Remove the Top cover following to step 2.2.
3. Remove the Front cover following to step 2.4.
4. Remove the LD duct top following to step 2.6.
5. Remove the Adjuster leg by turning it from the bottom case.
6. Remove 2 screws-A and 2 screws-B and take the LD unit block out following to step
2.8.1.
After that, remove the LD unit following to steps 2.8.2 and 2.8.3.
* After replacing the LD unit with new one, take the needed adjustments following to
the item [1. Adjustment items and procedures] on SECTION 3 <ADJUSTMENT>.
Click on the first or last page to see other PT-VMZ60 / PT-VMZ50 / PT-VMZ40 / PT-VMW60 / PT-VMW50 (serv.man3) service manuals if exist.