PT-RZ670, PT-RW630 (serv.man8) — Panasonic Projector Other Service Manuals (repair manual)

Model
PT-RZ670 PT-RW630 (serv.man8)
Pages
42
Size
6.36 MB
Type
PDF
Document
Other Service Manuals
Brand
Device
Projector / 1-CHIP DLP BASED PROJECTOR
File
pt-rz670-pt-rw630-sm8.pdf
Date

View Panasonic PT-RZ670 / PT-RW630 (serv.man8) Other Service Manuals online

1. The name of each part  ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 INF-2
1. 1. Projector body
1. 2. Control panel
1. 3. Connecting terminals
1. 4. Remote control
2. OSD Menu Navigation  ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 INF-5
3. Service Mode  ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 INF-9
3. 1. Setting to Service Mode
3. 2. Resetting to User Mode
3. 3. Functions in Service Mode
4. External control  ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 INF-14
4. 1. Control through Serial terminal
4. 2. Control through LAN terminal
4. 3. Control commands List
5. Notification for service operation  ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 INF-20
5. 1. Before service operation
5. 2  Service
6 Troubleshooting  ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 
INF-22
6. 1. Shutdown system
6. 2. System log data acquisition method
6. 3. Troubleshooting
Rev. 1  2015-04
CONTENTS
SECTION 1
SERVICE  INFORMATION
Model No.
PT-RZ670
PT-RW630
SECTION 1  SERVICE  INFORMATION
< RZ670/RW630 >
1. The name of each part
  1. 1. Projector body
1
2
3
4
5
6
7
7
10
8
8
11
9
16
17
14
13
15
7
7
7
Front
Side
Rear
8
8
8
12
Projection direction
Bottom
1  Remote control signal receiver (front)
2  Power indicator <ON (G)/STANDBY (R)>
Displays the status of the power.
3  Light source indicator <LIGHT1>
Displays the status of light source 1.
4  Light source indicator <LIGHT2>
Displays the status of light source 2.
5  Temperature indicator <TEMP>
Displays the internal temperature status.
6  (Not available with this projector)
7 Adjustable 
feet
Adjusts the projection angle.
8  Air intake port
9 Projection 
lens
(Only models with lens)
10  Remote control signal receiver (rear)
11  Air exhaust port
12  Burglar hook port
Attaches a burglar prevention cable, etc.
13 Control 
panel
 
 
14 Connecting 
terminals
 
 
15 Security 
slot
This security slot is compatible with the Kensington security 
cables.
16  <MAIN POWER> switch
Turns on/off the main power.
17  <AC IN> terminal
Connect the supplied power cord.
Attention
 
f Do not block the ventilation ports (intake and exhaust) of the projector.
INF - 2
SECTION 1  SERVICE  INFORMATION
< RZ670/RW630 >
  1. 2. Control panel
  1. 3. Connecting terminals
9
10
11
12
13
14
2
4
3
1
5
6
7
8
1  Power on <
b> button
Starts projection when the <MAIN POWER> switch on the 
projector is set to <ON> when the power is switched off 
(standby mode).
2  Power standby <
v> button
Sets the projector to the state where the projector is switched 
off (standby mode) when the <MAIN POWER> switch on the 
projector is set to <ON> and in projection mode.
3 <RGB1> 
button
Switches the input to RGB1.
4 <RGB2> 
button
Switches the input to RGB2.
5 <DVI-D> 
button
Switches the input to DVI-D.
6 <HDMI> 
button
Switches the input to HDMI.
7  <DIGITAL LINK> button
Switches the input to DIGITAL LINK.
8 <SDI> 
button
Switches the input to SDI.
(Only for PT-RZ670)
9 <MENU> 
button
Displays or hides the main menu. 
 
 
Returns to the previous menu when a sub-menu is displayed.
If you press the <MENU> button on the control panel for at least 
three seconds while the on-screen display is off (hidden), the 
on-screen display is turned on.
10 <LENS> 
button
Adjusts the focus, zoom, and shift (position) of the lens.
11 <ENTER> 
button
Determines and executes an item in the menu screen.
12 <SHUTTER> 
button
Used to temporarily turn off the image. 
 
 
13 
asqw buttons
Used to select items in the menu screen, change settings, and 
adjust levels.
Also used to enter a password in [SECURITY] or enter 
characters.
14  <AUTO SETUP> button
Automatically adjusts the image display position while projecting 
the image. [PROGRESS] is displayed while in automatic 
adjustment.
  
1
2
3
4
5
6
7
8
9
10
1  <REMOTE 1 IN> terminal/<REMOTE 1 OUT> terminal
These are the terminals to connect the remote control for serial 
control in a multiple projector environment.
2  <REMOTE 2 IN> terminal
This is a terminal to remotely control the projector using the 
external control circuit.
3  <SERIAL IN> terminal
This is the RS-232C compatible terminal to externally control 
the projector by connecting a computer.
4  <SERIAL OUT> terminal
This is a terminal to output the signal connected to the <SERIAL 
IN> terminal.
5  <SDI IN> terminal
This is the terminal to input SDI signals.
(Only for PT-RZ670)
6  <RGB 1 IN> (<R/P
R
/VIDEO>, <G/Y>, <B/P
B
/C>, <SYNC/HD>, 
<VD>) terminals
These are terminals to input RGB signals, YC
B
C
R
/YP
B
P
R
 
signals, Y/C signals, or video signals.
7  <RGB 2 IN> terminal
This is a terminal to input RGB signals or YC
B
C
R
/YP
B
P
R
 signals.
8  <DVI-D IN> terminal
This is the terminal to input DVI-D signals.
9  <HDMI IN> terminal
This is the terminal to input HDMI signals.
10  <DIGITAL LINK/LAN> terminal
This is the LAN terminal to connect to the network. This is also 
used when connecting a video signal transmission device via 
the LAN terminal.
Attention
 
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
INF - 3
SECTION 1  SERVICE  INFORMATION
< RZ670/RW630 >
  1. 4. Remote control
1
3
2
4
5
7
6
8
9
10
15
12
11
13
14
16
17
Front
Top
Bottom
1  Power standby <
v> button
Sets the projector to the state where the projector is switched 
off (standby mode) when the <MAIN POWER> switch on the 
projector is set to <ON> and in projection mode.
2  Power on <
b> button
Starts projection when the <MAIN POWER> switch on the 
projector is set to <ON> when the power is switched off 
(standby mode).
3  Remote control indicator
Blinks if any button in the remote control is pressed.
4  Lens (<FOCUS>, <ZOOM>, <SHIFT>) buttons
Adjusts the projection lens. 
 
 
5  <MENU> button/<ENTER> button/
asqw buttons
Used to navigate through the menu screen. 
 
 
6  <ON SCREEN> button
Switches the on-screen display function on (display) or off 
(hide).  
 
7  Input selection (<RGB1/2>, <DIGITAL LINK>, <DVI-D>, 
<VIDEO>, <SDI>, <HDMI>) buttons
Switches the input signal to project. 
 
 
(SDI input is supported only for PT-RZ670.)
8 <FUNCTION> 
button
Assigns a frequently used operation as a shortcut button. 
 
 
9  Number (<0> - <9>) buttons
Used for entering an ID number or a password in a multiple 
projector environment.
10  <AUTO SETUP> button
Automatically adjusts the image display position while projecting 
the image.
[PROGRESS] is displayed while in automatic adjustment. 
11 <SHUTTER> 
button
Used to temporarily turn off the image.
 
12  <TEST PATTERN> button
Displays the test pattern. 
 
 
13 <STATUS> 
button
Displays the projector information.
14 <DEFAULT> 
button
Resets the content of the sub-menu to the factory default. 
15  <ID SET> button
Sets the ID number of the remote control in a multiple projector 
environment.  
 
16  Remote control signal transmitter
17  Remote control wired terminal
This is the terminal used to connect to the projector via a cable 
when used as a wired remote control.
 
 
Attention
 
f Do not drop the remote control.
 
f Avoid contact with liquids or moisture.
 
f Do not attempt to modify or disassemble the remote control.
Note
 
f When operating the remote control by directly pointing at the remote control signal receiver of the projector body, operate the remote 
control within a distance approx. 30 m (98'5") from the remote control signal receiver. The remote control can control at angles of up to ±30° 
vertically and horizontally, but the effective control range may be reduced.
 
f If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate properly.
 
f
 
f
. Use 
it in a place distant from the light source.
 
f The power indicator <ON (G)/STANDBY (R)> will blink if the projector receives a remote control signal.
 
f The operation of the <VIDEO> button is disabled in the factory default settings. The operation is enabled when [REMOTE CONTROL] is set 
to [USER] and [VIDEO BUTTON] of [INPUT SELECT BUTTON] is set to other than [DISABLE], from the [SECURITY] menu 
→ [CONTROL 
DEVICE SETUP]
 
 
INF - 4
Page of 42
Display

Download Panasonic PT-RZ670 / PT-RW630 (serv.man8) Other Service Manuals

Here you can view online or download Panasonic PT-RZ670 / PT-RW630 (serv.man8) Other Service Manuals in pdf. This Other Service Manuals can help you recover, restore, fix, disassemble and repair Panasonic PT-RZ670 / PT-RW630 (serv.man8) Projector. Information contained in Panasonic PT-RZ670 / PT-RW630 (serv.man8) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).