DOWNLOAD Panasonic PT-RZ575 (serv.man2) Service Manual ↓ Size: 29.7 MB | Pages: 99 in PDF or view online for FREE

ADJ-12

    [Display example] 

      • When LD1 is open failure

 

  [Reference]

      • All LD units location

6. Click the [Reset] button corresponding to the  replaced LD unit No.

 

When the open failure occurred, the text 

characters becomes red.

In addition, "OFF" is displayed on status.

LD4

LD3

LD2

LD1

ADJ-13

7. A confirmation window is displayed.

  If LD No. is correct, click the [OK] button and reset the runtime.

 

Display example of LD1 reset

8. Completion screen is displayed, and click the [OK] button.

  Confirm the runtime is set to 0h.

 

Display example of LD1 reset

9. After completing the reset, restart the projector and check the runtime with the [STATUS] screen.

ADJ-14

*  Firmware updating can be done via the LAN terminal or the serial terminal. (Updating of DIGITAL LINK firmware can be 

done via the serial terminal only.)

1. Computer : Use it for runtime reset  with service tool.

2. Communication cable : 

 

3. Service Software : [MainSubNet Update Tool.exe] Download from the projector service Web (PASS).

4. Firmware : Download the firmware file from the projector service Web (PASS) to the PC.

1. Check the settings of the projector.

    

Serial terminal connection

  1) The [INPUT SELECT] of sub menu [RS-232C] must be set according to the connection method.

  2) The [EMULATE] of sub menu [RS-232C], please set to [DEFAULT]. (in service mode)

  3) Check the RS-232C settings (ID, Baudrate and Parity) and take a note.

         

LAN terminal connection

  1) Check the network IP address of the projector and take a note.

  2) Set the IP address of computer to approximate value of projector IP address.

  3) When connecting using DIGITAL LINK compatible device.

      The [DIGITAL LINK MODE] of sub menu [NETWORK], please set to [AUTO] or [ETHERNET].

  [Note]

   • If you have changed the each menu settings, please return settings of the original (customers) after work.

2. Connect the projector and the PC by using a communication cable.

1. Switch the projector to "Normal-Standby" mode (STANDBY/ON indicator is lighting in red).
2. Activate a [MainSubNet Update Tool.exe] service software and select the Model No., then click the [OK] button.

  

Serial terminal connection

LAN terminal connection

Computer

Projector

Communication cable

D-Sub 9P

(male)

Computer

Projector

LAN cable

 (straight)

LAN cable

 (straight)

Hub

Serial terminal connection

  D-sub 9pin (male/female RS-232C straight)

LAN terminal connection

  LAN cable (When connecting directly, use a cross cable)

(SOLID SHINE Series → RZ575/RZ570)

ADJ-15

3. Select the connection method, and enter the setting information of the projector.

     

Serial terminal connection

    • Select [SERIAL] menu and set up the Serial Port, Baudrate and Parity of the PC.

    

 

     

LAN terminal connection

    • Select [LAN] menu and set up the IP address, Username, Password and Command Port of the projector.

        [Note] • If the Username and Password has been changed, please select serial terminal connection.

4. After completing the connection setup, click the [Connection Check] button.

    • When "Check : OK" is displayed, click the [OK] button and proceed to the next step.

    • If "Check : NG" is displayed, check the setting in step 3.

Items

Default

SERIAL

Port

–

Baud Rate

9600bps

Parity

None

LAN

IP Address

192.168.0.8

Username

admin1

Password

panasonic

Command Port

1024