Panasonic PT-RZ12KE / PT-RS11K (serv.man3) Service Manual ▷ View online
INF-15
SECTION 1 SERVICE INFORMATION
<RZ12K/RS11K>
3. 3. 2. Additional function of each menu
1. [PICTURE] menu
• [LIGHTS OUT FADE-IN], [LIGHTS OUT FADE-OUT] and [AI WINDOW] is added to the setting of the sub menu [DYNAM-
IC CONTRAST] - [USER SETTING].
- LIGHTS OUT FADE-IN* : Sets up the time period of fade-in operation at the light out timer operaton. (Off, 0.5 to 10 sec.)
- LIGHTS OUT FADE-OUT* : Sets up the time periods of fade-out operation at the light out timer operaton.(Off, 0.5 to 10 sec.)
* If LIGHTS OUT TIME setting is DISABLE, those will be grayed out.
- AI WINDOW : Sets up the APL detective area. (AUTO/MANUAL, further settings are available in MANUAL mode)
AI WINDOW
AI MODE
AI MODE
AI WINDOW
AI MODE
AI MODE
VERTICAL SIZE
HORIZONTAL SIZE
VERTIACAL POSITION
HORIZONTAL POSITION
HORIZONTAL SIZE
VERTIACAL POSITION
HORIZONTAL POSITION
5
AUTO
MANUAL
90%
90%
90%
5
DYNAMIC CONTRAST
AUTO CONTRAST
BRIGHT SIGNAL LEVEL
LIGHTS OUT TIMER
LIGHTS OUT SIGNAL LEVEL
MANUAL INTENSITY
DYNAMIC GAMMA
0%
DISABLE
30%
OFF
LIGHTS OUT FADE-IN
LIGHTS OUT FADE-OUT
OFF
OFF
OFF
255
AI WINDOW
2. [POSITION] menu
• [DVI EQUALIZER] is added to a sub menu.
When noise contamination to DVI input caused by long cable or external
device, set this item so that the noise decreases. (AUTO/LOW/MID/HIGH)
3. [DISPLAY OPTION] menu
• The following items are added to [SDI IN] sub menu.
[XYZ TO RGB SETTING]
- FACTORY SETTING : Uses the value of FACTORY Yxy conversion factor to the original data of XYZ → RGB.
- MEASURED : Uses the value of MEASURED Yxy conversion factor to the original data of XYZ → RGB.
- REC709 : Uses the value of REC709 Yxy conversion factor to the original data of XYZ → RGB.
- DCI P3 : Uses the value of DCI P3 Yxy conversion factor to the original data of XYZ → RGB.
[XYZ TEST PATTERN]
- WHITE : 10% ~ 100%
- DARK GRAY : 1 ~ 10
- COLOR : Red/Green/Blue/Cyan/Magenta/Yellow of 1 ~ 2
12. INDICATOR SETTING
• Set this when you want to turn off the indicator LED.
– INDICATOR MODE
– NORMAL : The indicator maintains lighting (Default)
– OFF : The indicator will be forcibly turned off.
– TIMEOUT : The indicator turns off when no operation is taken for a certain time.
– NO ACTIVITY TIME
Setup the time to turn off when INDICATOR MODE setting is TIMEOUT.
You can set the time up to 15 minutes in 1 minute. (default setting is 15 MIN.)
*If INDICATOR MODE setting is NORMAL or OFF, this will be grayed out.
– INTERLOCKED 7SEG DISPLAY
Set this when you want to turn off the Self-diagnosis display (7SEG) on the control panel.
– ON : Self-diagnosis indication will be linked with setting of INDICATOR MODE. (Default)
– OFF : Self-diagnosis indication maintains lighting not linking with the setting of INDICATOR MODE.
*If INDICATOR MODE setting is NORMAL, this will be grayed out.
SDI IN
2/2
DUAL LINK
3G-SDI MAPPING
XYZ TO RGB SETTING
XYZ TEST PATTERN
AUTO
FACTORY SETTING
POSITION
SHIFT
ASPECT
ZOOM
CLOCK PHASE
ASPECT
ZOOM
CLOCK PHASE
+31
DVI EQUALIZER
GEOMETRY
OFF
4:3
AUTO
INF-16
SECTION 1 SERVICE INFORMATION
<RZ12K/RS11K>
4. [PROJECTOR SETUP] menu
(1) The following two items are added to the sub-menu.
1) "COOLING CONDITION"
- Fan control can be set manually. (Usually set to [AUTO].)
2) "HIGH ALTITUDE MODE"
- Altitude can be set manually. (Usually set to [AUTO].)
PROJECTOR SETUP
1/3
PROJECTOR ID
PROJECTION METHOD
PROJECTION METHOD
COOLING CONDITION
HIGH ALTITUDE MODE
OPERATION SETTING
OPERATING MODE
MAX LIGHT OUTPUT LEVEL
LIGHT OUTPUT
BRIGHTNESS CONTROL
STANDBY MODE
NO SIGNAL SHUT-OFF
NO SIGNAL LIGHTS-OUT
OPERATION SETTING
OPERATING MODE
MAX LIGHT OUTPUT LEVEL
LIGHT OUTPUT
BRIGHTNESS CONTROL
STANDBY MODE
NO SIGNAL SHUT-OFF
NO SIGNAL LIGHTS-OUT
100.0%
DISABLE
DISABLE
DISABLE
AUTO
NORMAL
NORMAL
ALL
FRONT/FLOOR
AUTO
AUTO
100.0%
COOLING CONDITION
●
AUTO
FLOOR SETTING
CEILING SETTING
VERTICAL UP SETTING
VERTICAL DOWN SETTING
PORTRAIT SETTING
CEILING SETTING
VERTICAL UP SETTING
VERTICAL DOWN SETTING
PORTRAIT SETTING
HIGH ALTITUDE MODE
HIGH ALTITUDE MODE
HIGH ALTITUDE MODE
ALTITUDE
0m
AUTO
(2) In the [BRIGHTNESS CONTROL STATUS] sub menu, [DETAILED INFORMATION] is displayed by pressing the [ENTER]
key. The detailed information of brightness control can be checked.
BRIGHTNESS CONTROL STATUS
LINK
■
PROJECTOR2
1:
■
PROJECTOR1
2:
■
PROJECTOR3
3:
4:
5:
6:
7:
UPDATE
4:
5:
6:
7:
UPDATE
192.168. 0. 8
GROUP A
192.168. 0. 9
192.168. 0. 10
DETAILED INFORMATION
GROUP
GROUP MAX TARGET GAIN
IP ADDRESS
PROJECTOR NAME
LIGHT OUTPUT
TARGET GAIN
FM GAIN
GROUP MAX TARGET GAIN
IP ADDRESS
PROJECTOR NAME
LIGHT OUTPUT
TARGET GAIN
FM GAIN
A
120%
63%
57%
192.168. 0. 8
PROJECTOR2
51%
(3) [SHUTTER COUNTER] is added in sub menu [INITIALIZE].
- Initialize the count if replaced the mechanical shutter.
INITIALIZE SHUTTER COUNTER?
INITIALIZE
ALL USER DATA
REGISTERED SIGNAL
NETWORK/E-MAIL
LOGO IMAGE
REGISTERED SIGNAL
NETWORK/E-MAIL
LOGO IMAGE
SHUTTER COUNTER
(4) The following items are added to the sub menu "STATUS ".
1) Page 2
- VERTICAL TILT
Vertical angle
- HORIZONTAL TILT
Horizontal angle
STATUS
2/14
INPUT
BACKUP INPUT STATUS
SIGNAL NAME
SIGNAL FREQUENCY
NUMBER OF REGISTERED SIGNAL
REMOTE2 STATUS
AC VOLTAGE
VERTICAL TILT
HORIZONTAL TILT
BACKUP INPUT STATUS
SIGNAL NAME
SIGNAL FREQUENCY
NUMBER OF REGISTERED SIGNAL
REMOTE2 STATUS
AC VOLTAGE
VERTICAL TILT
HORIZONTAL TILT
0°
65.22kHz/59.99Hz
100V
DISABLE
-
SXGA60+-A1
0/96
RGB2
0°
INF-17
SECTION 1 SERVICE INFORMATION
<RZ12K/RS11K>
STATUS
3/14
DIGITAL LINK VERSION
FPGA VERSION
CPLD VERSION
FM R VERSION
FM G VERSION
FM B VERSION
LD DRIVER VERSION
LD SUB VERSION
FRC VERSION
POWER VERSION
FPGA VERSION
CPLD VERSION
FM R VERSION
FM G VERSION
FM B VERSION
LD DRIVER VERSION
LD SUB VERSION
FRC VERSION
POWER VERSION
10.20 / 30.40 / 40.50
1.30.20.5
1.00 / 1.00
1.00.00
1.00.00
1.00.00
1.00 / 1.00
00.0000.00
00.0000.00
00.0000.00
10.20
STATUS
7/14
MAIN VERSION
FPGA VERSION
FPGA VERSION
10.20.28
BMP VER.
ENG VER.
RUS VER.
KOR VER.
CHI VER.
JPN VER.
1.00
1.00
1.00
1.00
1.00
1.00
1.00
STATUS
8/14
TEMP(°C)
P.SENSOR
Y=12345.6 / x=0.123 / y=0.456
AIR FLOW
076.0/054 -12.0/20.0 75.0/1.0
FAN MODE
atm
RD1
RD2
RD3
RD4
RD5
RD6
EX1
EX2
IN1
IN2
PRI1
PRI2
BDMD
EEX1
EEX2
C-IN
LD
PUM1
PUM2
OK[2500]
OK[2500]
+0[1013hPa]
35.0(IN) / 21.0(OPT) / 45.0(OUT)
OK[2500]
OK[2500]
LOW
OK[2500]
OK[2500]
OK[2500]
OK[2500]
OK[2500]
OK[2500]
OK[2500]
OK[2500]
OK[2500]
OK[2500]
OK[2500]
OK[2500]
OK[2500]
35.0(LD1) / 35.0(LD2) /35.0(FPGA)
OK[2500]
OK[2500]
STATUS
9/14
ON COUNT
LD1-1
LD1-2
LD1-3
LD1-4
LD1-5
LD1-6
LD2-1
LD2-2
LD2-3
LD2-4
LD2-5
LD2-6
RUNTIME
LD1-1
LD1-2
LD1-3
LD1-4
LD1-5
LD1-6
LD2-1
LD2-2
LD2-3
LD2-4
LD2-5
LD2-6
20000h
20000h
20000h
20000h
20000h
20000h
20000h
20000h
20000h
20000h
20000h
20000h
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
2) Page 3
- DIGITAL LINK VERSION Digital LINK software version
- FPGA VERSION
FPGA software version (FPGA1/FPGA2/FPGA3)
- CPLD VERSION
CPLD software version
- FM R VERSION
Formatter (R) software version
- FM G VERSION
Formatter (G) software version
- FM B VERSION
Formatter (B) software version
- LD DRIVER VERSION
LD Driver software version
- FRC VERSION
FRC (Frame Rate Control) software version
- POWER VERSION
Power microprocessor software version
3) Page 5
- MAIN VERSION
Main microprocessor software version
- FPGA VERSION
FPGA software version [FPGA1/FPGA2/FPGA3]
- BMP VER.
Bitmap data version
- ENG VER. ~ JPN VER.
Version of the each font data (English/Russian/Ko-
rean/Chinese/Japanese/Closed caption)
4) page 8
- TEMP (C)
Intake air temperature(IN) / Optical module
temperature(OPT) / Exhaust air temperature(OUT) /
FPGA surrounding temperature (FPGA)
- P.SENSOR
Luminance sensor detected value
- AIR FLOW
Air flow sensor value/AD value, Sensor correction
value/AD value, Clogging threshold/Margin value
- FAN
Fan rotation mode [LOW/MID/HIGH]
- atm
Air pressure sensor value
- RD1
Status of Radiator 1 fan [rpm]
- RD2
Status of Radiator 2 fan [rpm]
- RD3
Status of Radiator 3 fan [rpm]
- RD4
Status of Radiator 4 fan [rpm]
- RD5
Status of Radiator 5 fan [rpm]
- RD6
Status of Radiator 6 fan [rpm]
- EX1
Status of Exhaust 1 fan [rpm]
- EX2
Status of Exhaust 2 fan [rpm]
- PRI1
Status of Color Prism 1 fan [rpm]
- PRI2
Status of Color Prism 2 fan [rpm]
- BDMD
Status of B-DMD fan [rpm]
- EEX1
Status of DMD Exhaust 1 fan [rpm]
- EEX2
Status of DMD Exhaust 2 fan [rpm]
- C-IN
Status of Signal Block fan [rpm]
- LD
Status of LD Driver fan [rpm]
- PUM1
Status of Pump 1 fan [rpm]
- PUM2
Status of Pump 2 fan [rpm]
5) page 9
- ON COUNT
Turn on times of each LD bank
- RUNTIME
Runtime of each LD bank
INF-18
SECTION 1 SERVICE INFORMATION
<RZ12K/RS11K>
6) Page 10
- LD1 STATUS
Status of each bank of LD1 (0 : Off/ 1: On /* : Intentional Off)
- LD2 STATUS
Status of each bank of LD2 (0 : Off/ 1: On /* : Intentional Off)
STATUS
10/14
LD1 STATUS
LD1-1 (Y)
LD1-1 (Y)
LD1-2 (B)
LD1-3 (Y)
LD1-4 (Y)
LD1-5 (Y)
LD1-6 (Y)
LD2 STATUS
LD2-1 (Y)
LD2-1 (Y)
LD2-2 (B)
LD2-3 (Y)
LD2-4 (Y)
LD2-5 (Y)
LD2-6 (Y)
1
1
1
1
1
1
1
1
1
1
1
1
7) Page 11
• Displays SDI signal information (No signal is displayed with "---").
STATUS
11/14
SDI PAYLOAD INFO.
VERSION IDENTIFIER
MODE
TRANSPORT
PICTURE
RATE
ASPECT
HORIZONTAL
SAMPLING
BIT DEPTH
MODE
TRANSPORT
PICTURE
RATE
ASPECT
HORIZONTAL
SAMPLING
BIT DEPTH
0x87
59.94
SD-SDI
INTERLACED
INTERLACED
INTERLACED
10bit
16:9
4:4:4 (RGB)
1920
- MODE
Mode ([NO SIGNAL], [SD-SDI], [HD-SDI], [3G-SDI])
- TRANSPORT
Conversion method ([PROGRESSIVE], [INTERLACED])
- PICTURE
Picture information ([PROGRESSIVE], [INTERLACED])
- RATE
Rate information ([23.98], [24], [25], [29.97], [30], [50], [59.94], [60])
- SAMPLING
Sampling information
([4:2:2 (YPBPR)], [4:2:2 (YCBCR)], [4:4:4 (YPBPR)], [4:4:4 (YCBCR)],
[4:4:4 (RGB)], [4:4:4:4 (YPBPR+A)], [4:4:4:4 (RGB+A)], 4:4:4 (XYZ)])
- BIT DEPTH
Bit depth ([8bit], [10bit], [12bit])
8) page 10~11
- LD1/LD2 ON /OFF history log
LD1 HISTORY
12/14
2014/03/11 18:30 ON
2014/03/11 18:45 OFF
2014/03/11 19:00 ON
2014/03/11 19:15 OFF
2014/03/11 19:30 ON
2014/03/11 19:45 OFF
2014/03/11 20:00 ON
2014/03/11 20:15 OFF
2014/03/11 20:30 ON
2014/03/11 20:45 OFF
2014/03/11 21:00 ON
2014/03/11 21:15 OFF
2014/03/11 18:45 OFF
2014/03/11 19:00 ON
2014/03/11 19:15 OFF
2014/03/11 19:30 ON
2014/03/11 19:45 OFF
2014/03/11 20:00 ON
2014/03/11 20:15 OFF
2014/03/11 20:30 ON
2014/03/11 20:45 OFF
2014/03/11 21:00 ON
2014/03/11 21:15 OFF
LD2 HISTORY
13/14
2014/03/11 18:30 ON
2014/03/11 18:45 OFF
2014/03/11 19:00 ON
2014/03/11 19:15 OFF
2014/03/11 19:30 ON
2014/03/11 19:45 OFF
2014/03/11 20:00 ON
2014/03/11 20:15 OFF
2014/03/11 20:30 ON
2014/03/11 20:45 OFF
2014/03/11 21:00 ON
2014/03/11 21:15 OFF
2014/03/11 18:45 OFF
2014/03/11 19:00 ON
2014/03/11 19:15 OFF
2014/03/11 19:30 ON
2014/03/11 19:45 OFF
2014/03/11 20:00 ON
2014/03/11 20:15 OFF
2014/03/11 20:30 ON
2014/03/11 20:45 OFF
2014/03/11 21:00 ON
2014/03/11 21:15 OFF
5. [TEST PATTERN] menu
• The following test patterns are added.
- Focus (background 70% gray) pattern
- Checker pattern
- Inverted checker pattern
Click on the first or last page to see other PT-RZ12KE / PT-RS11K (serv.man3) service manuals if exist.