Panasonic PT-MZ16K / PT-MZ13K / PT-MZ10K (serv.man2) Service Manual ▷ View online
INF-19
SECTION 1 SERVICE INFORMATION
<MZ16K/MZ13K/MZ10K>
(3) The following items are added to the sub menu [STATUS].
1) Page 2
- VERTICAL TILT
Vertical angle
- HORIZONTAL TILT
Horizontal angle
2) Page 4
"LIGHT RUNTIME RESET" window appears when pressing the [ENTER button on the control panel or remote control.
Select [OK] on the "LIGHT RUNTIME RESET" window to reset the each operating mode.
INF-20
SECTION 1 SERVICE INFORMATION
<MZ16K/MZ13K/MZ10K>
3) Page 6
Indicates SDI signal information.
([---] is displayed if the information is not available)
- MODE
Mode (NO SIGNAL/SD-SDI/HD-SDI/3G-SDI)
- TRANSPORT
Conversion method (PROGRESSIVE/INTER-
LACED)
- PICTURE
Video system (PROGRASSIVE/INTERLACED)
- RATE
Rate information (23.98/24.00/25.00/29.97/30.00
/50.00/59.94/60.00)
- SAMPLING
Sampling information (4:2:2(YPBPR)/4:2:2(YCBCR)
/4:4:4(YPBPR)/4:4:4(YCBCR)/4:4:4(RGB)
/4:4:4:4(YPBPR+A)/4:4:4:4(RGB+A)/4:4:4(XYZ))
- BIT DEPTH
Bit depth (8bit/10bit/12bit)
4) Page 7
- DIGITAL LINK VERSION DIGITAL LINK firmware version
- FPGA VERSION
FPGA firmware version (FPGA1/FPGA2/FPGA3)
- CPLD VERSION
CPLD firmware version
- LD DRIVER VERSION
LD Driver firmware version (LD1/LD2)
- PWER VERSION
Power firmware version
- EMULATE
Emulate Setting status
-VERSION
Emulate version
5) Page 8
- MAIN VER.
Main CPU firmware version
- FPGA VER.
FPGA firmware control version (FPGA1/FPGA2/
FPGA3)
- BMP VER.
Bitmap data version
- ENG ~ CC
Version of the each font data
INF-21
SECTION 1 SERVICE INFORMATION
<MZ16K/MZ13K/MZ10K>
6) Page 9
- TEMP (℃)
Intake temp. (IN)/Exhaust temp. (OUT
LD1 temp.(LD1)/LD2 temp. (LD2)
PBS temp. (PBS)/LCD temp.(LCD)
- FAN MODE
Fan control mode (TYPE A ~ TYPE J)
- atm
Air pressure [hPa]
- LCD R
LCD B cooling fan status [rpm]
- LCD G
LCD R cooling fan status [rpm]
- LCD B
LCD G cooling fan status [rpm]
- PBS
PBS cooling fan status [rpm]
- RADIATOR1
Radiator1 cooling fan status [rpm]
- RADIATOR2
Radiator2 cooling fan status [rpm]
- PWR INTAKE
Power intake fan status [rpm]
- EXHAUST1
Exhaust1 fan status [rpm]
- EXHAUST2
Exhaust2 fan status [rpm]
- PUMP
Pump cooling motor status [rpm]
7) Page 10
Indicates the reading value of color sensor.
8) Page 11
Indicates the [On times]/[On time]/[Status] of each LD unit.
Lighting status (0: Off / 1: On)
(LD1-2 is not available for model PT-MZ10K)
INF-22
SECTION 1 SERVICE INFORMATION
<MZ16K/MZ13K/MZ10K>
8) Page 12 - 13
- LD1/LD2 ON /OFF history log
4. [TEST PATTERN] menu
• The following test patterns are added.
- Red pattern
- Green pattern
- Blue pattern
- Magenta pattern
- Yellow pattern
- Cyan pattern
- Flag pattern
- Flag pattern (Inverted)
- Convergence pattern
Click on the first or last page to see other PT-MZ16K / PT-MZ13K / PT-MZ10K (serv.man2) service manuals if exist.