Panasonic PT-JX200FBU / PT-JX200FWU / PT-JX200FBE / PT-JX200FWE / PT-JX200FBK / PT-JX200FWK (serv.man2) Service Manual ▷ View online
9
PREFACE
< JX200F >
2. Specifications
2. 1. Specifications
The specifications of the projector are as follows.
Chapter 7 Appendix — Specifications
140 - ENGLISH
Specifications
The specifications of the projector are as follows.
Model No.
PT-JX200FBU/PT-JX200FWU
Power supply
120 V ~ (120 V alternating current), 50 Hz/60 Hz
Power consumption
240 W (2.3 A)
In standby mode (when [STANDBY MODE] is set to [ECO]): 0.4 W
In standby mode (when [STANDBY MODE] is set to [ECO]): 0.4 W
*1
In standby mode (when [STANDBY MODE] is set to [NETWORK]): 0.5 W
*2
In standby mode (when [STANDBY MODE] is set to [NORMAL] and the fans are stopping): 12 W
DLP chip
Size
14.0 mm (0.55") (aspect ratio 4:3)
Display system
1-unit DLP chip, DLP type
Number of pixels 786 432 pixels (1 024 x 768 dots)
Lens
Electric zoom
1.3 to 2.9:1
Electric focus
F = 2.0 to 2.7
f = 15.2 mm to 32.7 mm
Light source
Laser diode (Maximum output: 36 W x 2, Wavelength: 452 - 458 nm)
Light output
*3
2 000 lm (ANSI)
Contrast ratio
*3
1 000:1
Projected image size
0.76 m (30") to 5.08 m (200")
Screen aspect ratio
4:3
Projection method
[FRONT]/[REAR]
(On/off of vertical flip can be set with [VERTICAL FLIP])
Card slot
SD card slot
*4
x 1 (supports SDHC memory card)
Outer case
Molded plastic
Outer color
PT-JX200FBU: Black, PT-JX200FWU: White
Weight
4.6 k] (10.14 lbs.)
Noise level
*3
When [LIGHT POWER] is set to [NORMAL]: 33 dB
When [LIGHT POWER] is set to [ECO]: 30 dB
Operating
environment
Temperature
*5
0 °C (32 °F) to 40 °C (104 °F)
Humidity
10 % to 80 % (no condensation)
Remote
control
Power supply
DC 3 V (AAA/R03 or AAA/LR03 battery x 2)
Operating range Within approx. 7 m (22'11") (when operated directly in front of signal receiver)
Weight
Weight
63 ] (2.2 ozs.) (including batteries)
Dimensions
Width: 44 mm (1-23/32"), Height: 105 mm (4-1/8"), Depth: 20.5 mm (13/16")
*1 When the [SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to [ECO], the network function (both wireless LAN and wired LAN)
cannot be used in standby mode.
*2 When the [SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to [NETWORK], the network function while in standby mode is
restricted to the projector operations via wired LAN using the Wake on LAN function.
*3 Measurement, measuring conditions and method of notation all comply with ISO/IEC 21118:2012 international standards.
*4 Operations of the Panasonic SD memory card up to capacity of 2 GB and Panasonic SDHC memory card up to capacity of 32 GB are confirmed.
*5 The operating environment temperature should be between 0 °C (32 °F) and 35 °C (95 °F) when using the projector at elevations between 1 000 m
(3 281') and 2 700 m (8 858') above sea level.
When using the projector at elevations lower than 1 000 m (3 281') above sea level, and the operating environment temperature becomes 35 °C
(95 °F) or higher, the light output may be reduced to protect the projector. When using the projector at elevations between 1 000 m (3 281') and 2
700 m (8 858') above sea level, and the operating environment temperature becomes 30 °C (86 °F) or higher, the light output may be reduced to
protect the projector.
▪PT-JX200FBU/PT-JX200FWU
10
PREFACE
< JX200F >
Chapter 7 Appendix — Specifications
ENGLISH - 139
Specifications
The specifications of the projector are as follows.
Model No.
PT-JX200FBE/PT-JX200FWE
Power supply
100 V - 240 V ~ (100 V - 240 V alternating current), 50 Hz/60 Hz
Power consumption
240 W (2.7 A - 1.1 A)
In standby mode (when [STANDBY MODE] is set to [ECO]): 0.5 W
In standby mode (when [STANDBY MODE] is set to [ECO]): 0.5 W
*1
In standby mode (when [STANDBY MODE] is set to [NETWORK]): 0.7 W
*2
In standby mode (when [STANDBY MODE] is set to [NORMAL] and the fans are stopping): 12 W
DLP chip
Size
14.0 mm (0.55") (aspect ratio 4:3)
Display system
1-unit DLP chip, DLP type
Number of pixels 786 432 pixels (1 024 x 768 dots)
Lens
Electric zoom
1.3 to 2.9:1
Electric focus
F = 2.0 to 2.7
f = 15.2 mm to 32.7 mm
Light source
Laser diode (Maximum output: 36 W x 2, Wavelength: 452 - 458 nm)
Light output
*3
2 000 lm (ANSI)
Contrast ratio
*3
1 000:1
Projected image size
0.76 m (30") to 5.08 m (200")
Screen aspect ratio
4:3
Projection method
[FRONT]/[REAR]
(On/off of vertical flip can be set with [VERTICAL FLIP])
Card slot
SD card slot
*4
x 1 (supports SDHC memory card)
Outer case
Molded plastic
Outer color
PT-JX200FBE: Black, PT-JX200FWE: White
Weight
4.6 k] (10.14 lbs.)
Noise level
*3
When [LIGHT POWER] is set to [NORMAL]: 33 dB
When [LIGHT POWER] is set to [ECO]: 30 dB
Operating
environment
Temperature
*5
0 °C (32 °F) to 40 °C (104 °F)
Humidity
10 % to 80 % (no condensation)
Remote
control
Power supply
DC 3 V (AAA/R03 or AAA/LR03 battery x 2)
Operating range Within approx. 7 m (22'11") (when operated directly in front of signal receiver)
Weight
Weight
63 ] (2.2 ozs.) (including batteries)
Dimensions
Width: 44 mm (1-23/32"), Height: 105 mm (4-1/8"), Depth: 20.5 mm (13/16")
*1 When the [SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to [ECO], the network function (both wireless LAN and wired LAN)
cannot be used in standby mode.
*2 When the [SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to [NETWORK], the network function while in standby mode is
restricted to the projector operations via wired LAN using the Wake on LAN function.
*3 Measurement, measuring conditions and method of notation all comply with ISO/IEC 21118:2012 international standards.
*4 Operations of the Panasonic SD memory card up to capacity of 2 GB and Panasonic SDHC memory card up to capacity of 32 GB are confirmed.
*5 The operating environment temperature should be between 0 °C (32 °F) and 35 °C (95 °F) when using the projector at elevations between 1 000 m
(3 281') and 2 700 m (8 858') above sea level.
When using the projector at elevations lower than 1 000 m (3 281') above sea level, and the operating environment temperature becomes 35 °C
(95 °F) or higher, the light output may be reduced to protect the projector. When using the projector at elevations between 1 000 m (3 281') and 2
700 m (8 858') above sea level, and the operating environment temperature becomes 30 °C (86 °F) or higher, the light output may be reduced to
protect the projector.
▪PT-JX200FBE/PT-JX200FWE, PT-JX200FBK/PT-JX200FWK
11
PREFACE
< JX200F >
2. 2 Applicable scanning frequency/terminal/wireless LAN
Chapter 7 Appendix — Specifications
ENGLISH - 141
r
Applicable scanning frequency/terminal/wireless LAN
Model No.
PT-JX200FBU/PT-JX200FWU
Applicable
scanning
frequency
*1
HDMI signal
525 (480) /60p, 525 (480) /60i, 625 (576) /50p, 625 (576) /50i, 750 (720) /60p, 750 (720) /50p,
1125 (1080) /60p, 1125 (1080) /60i, 1125 (1080) /50p, 1125 (1080) /50i
640 x 480/60, 800 x 600/56, 800 x 600/60, 1024 x 768/60, 1280 x 1024/60,
640 x 480/60, 800 x 600/56, 800 x 600/60, 1024 x 768/60, 1280 x 1024/60,
1280 x 720/50, 1280 x 720/60, 1280 x 768/50, 1280 x 768/60,
1280 x 800/50, 1280 x 800/60, 1600 x 900/50, 1600 x 900/60
Terminal
<HDMI IN>
terminal
1 set, HDMI 19 pins, HDCP compatible
Audio signal: Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
<AUDIO OUT>
terminal
1 set, M3 stereo mini jack (monitor output, stereo compatible)
0 V [rms] to 2.0 V [rms] (variable), output impedance 2.2 kΩ or less
<LAN> terminal
1 set, RJ-45, for network connection, PJLink compatible, 10Base-T/100Base-TX
<DC OUT>
terminal
USB connector (type A) x 1, for power supply (DC 5 V, maximum 2 A)
Wireless
LAN
Compliance
standards
MIRRORING
mode
IEEE802.11b/g/n: 2.412 GHz - 2.462 GHz
IEEE802.11a/n: 5.180 GHz - 5.240 GHz
5.745 GHz - 5.805 GHz
M-DIRECT mode
IEEE802.11b/g/n: 2.412 GHz - 2.462 GHz
IEEE802.11a/n: 5.180 GHz - 5.240 GHz
5.745 GHz - 5.825 GHz
USER mode
IEEE802.11b/g/n: 2.412 GHz - 2.462 GHz
IEEE802.11a/n: 5.180 GHz - 5.240 GHz
5.260 GHz - 5.320 GHz
5.500 GHz - 5.700 GHz (except 5.600 GHz - 5.650 GHz)
5.745 GHz - 5.825 GHz
Modulation
DBPSK, DQPSK, CCK, BPSK, QPSK, 16QAM, 64QAM, MIMO
Transmission
speed
IEEE802.11b: Up to 11 Mbps
IEEE802.11g/a: Up to 54 Mbps
IEEE802.11n: Up to 300 Mbps
Wireless channel
MIRRORING
mode
IEEE802.11b/g/n: 1~11 channel
IEEE802.11a/n: 36 / 40 / 44 / 48 channel
149 / 153 / 157 / 161 channel
M-DIRECT mode
IEEE802.11b/g/n: 1~11 channel
IEEE802.11a/n: 36 / 40 / 44 / 48 channel
149 / 153 / 157 / 161 / 165 channel
USER mode
IEEE802.11b/g/n: 1~11 channel (Active scanning)
IEEE802.11a/n: 36 / 40 / 44 / 48 channel (Active scanning)
52 / 56 / 60 / 64 channel (Passive scanning)
100 / 104 / 108 / 112 / 116 / 132 / 136 / 140 channel (Passive scanning)
149 / 153 / 157 / 161 / 165 channel (Active scanning)
Communication
distance
Approx. 30 m (98'5") (depends on the usage environment)
Security
Infrastructure mode
WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES), WEP (128 bit/64 bit),
WPA-EAP/WPA2-EAP (PEAP [MS-CHAPv2/GTC], EAP-FAST [MS-CHAPv2/GTC],
EAP-TTLS [MD5/MS-CHAPv2])
*1 Refer to “List of compatible signals” on the operating instructions for details of the types of video signals that can be used with the projector.
Note
f
The model numbers of accessories, etc. are subject to change without prior notice.
▪PT-JX200FBU/PT-JX200FWU
12
PREFACE
< JX200F >
▪PT-JX200FBE/PT-JX200FWE, PT-JX200FBK/PT-JX200FWK
Chapter 7 Appendix — Specifications
140 - ENGLISH
r
Applicable scanning frequency/terminal/wireless LAN
Model No.
PT-JX200FBE/PT-JX200FWE/PT-JX200FBK/PT-JX200FWK
Applicable
scanning
frequency
*1
HDMI signal
525 (480) /60p, 525 (480) /60i, 625 (576) /50p, 625 (576) /50i, 750 (720) /60p, 750 (720) /50p,
1125 (1080) /60p, 1125 (1080) /60i, 1125 (1080) /50p, 1125 (1080) /50i
640 x 480/60, 800 x 600/56, 800 x 600/60, 1024 x 768/60, 1280 x 1024/60,
640 x 480/60, 800 x 600/56, 800 x 600/60, 1024 x 768/60, 1280 x 1024/60,
1280 x 720/50, 1280 x 720/60, 1280 x 768/50, 1280 x 768/60,
1280 x 800/50, 1280 x 800/60, 1600 x 900/50, 1600 x 900/60
Terminal
<HDMI IN>
terminal
1 set, HDMI 19 pins, HDCP compatible
Audio signal: Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
<AUDIO OUT>
terminal
1 set, M3 stereo mini jack (monitor output, stereo compatible)
0 V [rms] to 2.0 V [rms] (variable), output impedance 2.2 kΩ or less
<LAN> terminal
1 set, RJ-45, for network connection, PJLink compatible, 10Base-T/100Base-TX
<DC OUT>
terminal
USB connector (type A) x 1, for power supply (DC 5 V, maximum 2 A)
Wireless
LAN
Compliance
standards
MIRRORING
mode
IEEE802.11b/g/n: 2.412 GHz - 2.462 GHz
IEEE802.11a/n: 5.180 GHz - 5.240 GHz
M-DIRECT mode IEEE802.11b/g/n: 2.412 GHz - 2.472 GHz
IEEE802.11a/n: 5.180 GHz - 5.240 GHz
USER mode
IEEE802.11b/g/n: 2.412 GHz - 2.472 GHz
IEEE802.11a/n: 5.180 GHz - 5.240 GHz
Modulation
DBPSK, DQPSK, CCK, BPSK, QPSK, 16QAM, 64QAM, MIMO
Transmission
speed
IEEE802.11b: Up to 11 Mbps
IEEE802.11g/a: Up to 54 Mbps
IEEE802.11n: Up to 300 Mbps
Wireless channel
MIRRORING
mode
IEEE802.11b/g/n: 1~11 channel
IEEE802.11a/n: 36 / 40 / 44 / 48 channel
M-DIRECT mode IEEE802.11b/g/n: 1~13 channel
IEEE802.11a/n: 36 / 40 / 44 / 48 channel
USER mode
IEEE802.11b/g/n: 1~13 channel
IEEE802.11a/n: 36 / 40 / 44 / 48 channel
Communication
distance
Approx. 30 m (98'5") (depends on the usage environment)
Security
Infrastructure mode
WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES), WEP (128 bit/64 bit),
WPA-EAP/WPA2-EAP (PEAP [MS-CHAPv2/GTC], EAP-FAST [MS-CHAPv2/GTC],
EAP-TTLS [MD5/MS-CHAPv2])
*1 Refer to “List of compatible signals” on the operating instructions for details of the types of video signals that can be used with the projector.
Note
f
The model numbers of accessories, etc. are subject to change without prior notice.
Click on the first or last page to see other PT-JX200FBU / PT-JX200FWU / PT-JX200FBE / PT-JX200FWE / PT-JX200FBK / PT-JX200FWK (serv.man2) service manuals if exist.