Panasonic PT-EZ580 / PT-EZ580L / PT-EZ580D / PT-EZ580LD / PT-EW640 / PT-EW640L / PT-EW640D / PT-EW640LD / PT-EX610 / PT-EX610L / PT-EX610D / PT-EX610LD (serv.man2) Service Manual ▷ View online
INF-9
SECTION 1 SERVICE INFORMATION
Chapter 4 Settings — Menu navigation
62 - ENGLISH
[DISPLAY LANGUAGE]
Details (x page 76)
[DISPLAY OPTION]
Sub-menu item
Factory default
Page
[COLOR ADJUSTMENT]
[OFF]
77
[COLOR CORRECTION]
[OFF]
77
[SCREEN SETTING]
―
78
[AUTO SIGNAL]
[OFF]
78
[AUTO SETUP]
―
78
[RGB IN]
―
79
[DVI-D IN]
―
80
[HDMI IN]
―
80
[DIGITAL LINK IN]
―
81
[DisplayPort IN]
―
81
[ON-SCREEN DISPLAY]
―
81
[CLOSED CAPTION SETTING]
―
83
[BACK COLOR]
[BLUE]
84
[STARTUP LOGO]
[DEFAULT LOGO]
84
[SHUTTER SETTING]
―
84
[P-TIMER]
―
85
[FREEZE]
―
86
[DIGITAL ZOOM]
[1.5]
86
[PROJECTOR SETUP]
Sub-menu item
Factory default
Page
[PROJECTOR ID]
[ALL]
88
[PROJECTION METHOD]
[FRONT/FLOOR]
88
[ECO MANAGEMENT]
―
89
[SCHEDULE]
[OFF]
90
[STARTUP INPUT SELECT]
[LAST USED]
92
[RS-232C]
―
92
[REMOTE2 MODE]
[DEFAULT]
94
[FUNCTION BUTTON]
―
94
[AUDIO SETTING]
―
94
[STATUS]
―
96
[DATE AND TIME]
―
97
[SAVE ALL USER DATA]
―
98
[LOAD ALL USER DATA]
―
98
[INITIALIZE]
―
98
[SERVICE PASSWORD]
―
99
[P IN P]
Details (x page 100)
[TEST PATTERN]
Details (x page 102)
[SIGNAL LIST]
Details (x page 103)
INF-10
SECTION 1 SERVICE INFORMATION
Chapter 4 Settings — Menu navigation
ENGLISH - 63
[SECURITY]
Sub-menu item
Factory default
Page
[SECURITY PASSWORD]
[OFF]
106
[SECURITY PASSWORD CHANGE]
―
106
[DISPLAY SETTING]
[OFF]
107
[TEXT CHANGE]
―
107
[MENU LOCK]
[OFF]
107
[MENU LOCK PASSWORD]
―
107
[CONTROL DEVICE SETUP]
―
108
[NETWORK]
Sub-menu item
Factory default
Page
[DIGITAL LINK MODE]
[AUTO]
109
[DIGITAL LINK SETUP]
―
109
[DIGITAL LINK STATUS]
―
110
[NETWORK SETUP]
―
110
[NETWORK CONTROL]
―
111
[NETWORK STATUS]
―
111
[DIGITAL INTERFACE BOX]
―
111
Note
f
Some items may not be adjusted or used for certain signal formats to be input to the projector.
The menu items that cannot be adjusted or used are shown in black characters, and they cannot be selected.
f
Sub-menu items and factory default settings vary depending on the selected input terminal.
INF-11
SECTION 1 SERVICE INFORMATION
3. Service Mode
This projector has Service Mode in addition to standard on-screen menus (User Mode).
This mode enables some menu settings for the service operation.
3. 1. Setting to Service Mode
1. Press the [MENU] button on the control panel of the projector or on the remote controller to display the main menu on the
screen.
2. Select a sub menu "service password" of the main menu "projector setup" and press the [ENTER] button.
3. Input the password "1565" by remote controller and press the [ENTER] button.
4. Press the [MENU] button. "SERVICE MODE" (MAIN MENU) will be displayed.
3. 2. Resetting to User Mode
1. Press the [MENU] button on the control panel of the projector or on the remote controller to display the main menu.
2. Select a sub menu "service password" of the main menu "projector setup" and press the [ENTER] button.
3. Input the password "0000" by remote controller and press the [ENTER] button.
4. Press the [MENU] button. "USER MODE" (MAIN MENU) will be displayed.
3. 3. Functions of Service Mode
* Function varies according to a version of the main microcomputer software.
3. 3. 1. EXTRA OPTION
"EXTRA OPTION" is added to the bottom of the main menu.
(;75$237231
6(/)&+(&.
6(/)&+(&.
)/,&.(5$'-867
6+877(523(1
21
21
21
32:(52))0(66$*(
&219(5*(1&(
02'(/
&/2*6(1625&$/,%5$5,21
:,1'2:('*(&$/,%5$7,21
6*0
&219(5*(1&(
02'(/
&/2*6(1625&$/,%5$5,21
:,1'2:('*(&$/,%5$7,21
6*0
0(186(/(&7
68%0(18
(17(5
1.
2.
3.
4.
5.
6.
7.
8.
2.
3.
4.
5.
6.
7.
8.
ȳȥȲȶȩȣȥȀȰȡȳȳȷȯȲȤ
ȩȮȰȵȴ
ȳȥȴ
ȥȮȴȥȲ
ȳȥȲȶȩȣȥȀȰȡȳȳȷȯȲȤ
ȳȥȲȶȩȣȥȀȭȯȤȥ
ȲȥȴȵȲȮ
ȭȥȮȵ
ȳȥȲȶȩȣȥȀȰȡȳȳȷȯȲȤ
ȩȮȰȵȴ
ȳȥȴ
ȥȮȴȥȲ
ȳȥȲȶȩȣȥȀȰȡȳȳȷȯȲȤ
ȵȳȥȲȀȭȯȤȥ
ȲȥȴȵȲȮ
ȭȥȮȵ
INF-12
SECTION 1 SERVICE INFORMATION
1. SELF CHECK
Self-diagnosing information Displays.
2. FLICKER ADJUST
• Perform the flicker adjustment
* Please refer to SECTION 3 (Adjustments) for the procedure. This adjustment should be performed after replacing the LCD
block or A-P.C. Board.
3. POWER OFF MESSAGE
• Setting of the shutter function with standby operation
- SHUTTER KEEP: When pushing the standby key while the shutter mode is on, the projector keeps the shutter mode on
and sets into standby mode.
- SHUTTER OPEN: When pushing the standby key while the shutter mode is on, the projector opens the shutter and displays
the "Power OFF confirmation message". (Default setting)
4. CONVERGENCE
• When the ingredient of each R/G/B color deviation, revise it electrically.
Specifically, please refer to chapter SECTION 3 (Adjustments)
5. MODEL
This setting is necessary when the A-P.C. Board is replaced with new one.
• If you can copy EEPROM data from old A-P.C. Board, this setting is unnecessary.
• This model setting is effective after power restart.
6. CLOG SENSOR CALIBRATION
• This is to calibrate the clog sensor circuit. This calibration is necessary when the [A]-P.C Board, EEPROM (IC1416) or
[M2]- P.C. Board is replaced.
• Refer to the chapter SECTION 3 (Adjustments) for the procedure.
7. WINDOW EDGE CALIBRATION (Factory use only)
• This is to setup the Window Edge Correction function On or Off.
- ON: Enable the Window Edge Correction (not memorized)
- OFF: Disable the Window Edge Correction function stop (Default setting)
8. SGM (Factory use only)
• To switch the LCD panel gamma characteristic
- ON: Enable the SGM function
- OFF: Disable the SGM function (Default setting)
(1) – MODEL: Model no. / S/N: Serial no.
(2) – MAIN: Main software version / NT: Network software
version
(3) – SUB: Sub software version / DIGITAL LINK: Digital
Link software version
(4) – Emulate setting • Version
(5) – Status of correction data in the memories
G-SAVED: Gamma correction data
U-SAVED: Color shading correction data
BG means no data saved
(6) – Intake air temperature check (Celsius/Fahrenheit)
(7) – Exhaust air temperature check (Celsius/Fahrenheit)
(8) – Air flow sensor check
(Sensor reading value/AD value/ Correction value)
(9) – LAMP check (Cumulative usage time/ON-OFF)
(10) – Fan check (1: normal /0:stop)
ȯȫȀȦȡȮȀȀȑȑȑȑȀȑȑȑȑ
ȬȣȤȈȲȉ
ȬȣȤȈȧȉ
ȬȣȤȈȢȉ
ȬȡȭȰȑ
ȬȡȭȰȒ
ȰȯȷȥȲ
ȥȸȵȡȳȴ
(11) –Angle sensor check (Horizontal angle/Vertical angle)
(12) – Pressure sensor check
(Air pressure value[hPa]/Sensor temperature)
(13) – Iris check
(14) – Shutter check (Opening and shutting number of times
[Failed number of times])
6(/)&+(&.
02'(/(=61$%
0$,117
68%',*,7$//,1.
(08/$7('()$8/7
2.*6$9('
2.86$9('
2.$,57(03
2.2877(03
2.$,5)/2:
2./$03+021
2.)$1
2.$1*/(6(1625+9
2.$706(1625
2.,5,6
2.6+877(5>@
* The word "OK" of Items (6) to (14) will be indicated in red
if the projector had shutdown due to abnormality last time.
(1)
(2)
(3)
(4)
(2)
(3)
(4)
(5)
(6)
(6)
(7)
(8)
(9)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
Click on the first or last page to see other PT-EZ580 / PT-EZ580L / PT-EZ580D / PT-EZ580LD / PT-EW640 / PT-EW640L / PT-EW640D / PT-EW640LD / PT-EX610 / PT-EX610L / PT-EX610D / PT-EX610LD (serv.man2) service manuals if exist.