Panasonic PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man3) Service Manual / Other ▷ View online
SECTION 3 ADJUSTMENTS
<PT-DZ16K>
5. Select Microprocessor to update, and click [load] button.
6. Appoint the microcomputer software that took in a computer beforehand, and click [Open] button.
*Microcomputer software rewrite
of the network by serial terminal
connection is not possible.
connection is not possible.
ADJ - 13
7. When load of the microcomputer software is completed, a checkmark and path and a version are displayed.
* When do not do update in Microprocessor Software which did load, exclude a checkmark of Microprocessor
to fall under.
Without a mistake, click a [Update] button.
ADJ - 13
SECTION 3 ADJUSTMENTS
<PT-DZ16K>
8. Click [OK] button and start update.
9. If completion and a message are displayed, click [OK] button.
*Rewrite the same version of
software will be skipped.
While update it, Lamp1-4 indicator indicates as follows
*Main ⇒ Lamp indicator 1-4, flashing red in order.
*Sub ⇒ Lamp indicator 1-4 all lit red.
*Formatter ⇒ Power indicator lit green.
*Sub ⇒ Lamp indicator 1-4 all lit red.
*Formatter ⇒ Power indicator lit green.
Lamp indicator 1-4 all lit red.
ADJ - 14
10. Click [EXIT]button, and please be finished.
* Reboot Projector, and please confirm whether the version of the Microprocessor Software is updated definitely,
with sub menu " STATUS" of the main menu " PROJECTOR SETUP" .
with sub menu " STATUS" of the main menu " PROJECTOR SETUP" .
ADJ - 14
SECTION 3 ADJUSTMENTS
<PT-DZ16K>
8. Click [OK] button and start update.
9. If completion and a message are displayed, click [OK] button.
*Rewrite the same version of
software will be skipped.
While update it, Lamp1-4 indicator indicates as follows
*Main ⇒ Lamp indicator 1-4, flashing red in order.
*Sub ⇒ Lamp indicator 1-4 all lit red.
*Formatter ⇒ Power indicator lit green.
*Sub ⇒ Lamp indicator 1-4 all lit red.
*Formatter ⇒ Power indicator lit green.
Lamp indicator 1-4 all lit red.
ADJ - 14
10. Click [EXIT]button, and please be finished.
* Reboot Projector, and please confirm whether the version of the Microprocessor Software is updated definitely,
with sub menu " STATUS" of the main menu " PROJECTOR SETUP" .
with sub menu " STATUS" of the main menu " PROJECTOR SETUP" .
ADJ - 14
SECTION 3 ADJUSTMENTS
<PT-DZ16K>
8. Click [OK] button and start update.
9. If completion and a message are displayed, click [OK] button.
*Rewrite the same version of
software will be skipped.
While update it, Lamp1-4 indicator indicates as follows
*Main ⇒ Lamp indicator 1-4, flashing red in order.
*Sub ⇒ Lamp indicator 1-4 all lit red.
*Formatter ⇒ Power indicator lit green.
*Sub ⇒ Lamp indicator 1-4 all lit red.
*Formatter ⇒ Power indicator lit green.
Lamp indicator 1-4 all lit red.
ADJ - 14
10. Click [EXIT]button, and please be finished.
* Reboot Projector, and please confirm whether the version of the Microprocessor Software is updated definitely,
with sub menu " STATUS" of the main menu " PROJECTOR SETUP" .
with sub menu " STATUS" of the main menu " PROJECTOR SETUP" .
ADJ - 14