Panasonic DP-MB545 / DP-MB537 / DP-MB536 / DA-FAP109 / DA-FAP110 Service Manual ▷ View online
121
DP-MB545/537/536 series
10.1.1. DTMF Single Tone Transmit Selection
Note:
After performing this check, do not forget to turn the setting off.
otherwise, dialing in DTMF signal will not work.
otherwise, dialing in DTMF signal will not work.
10.1.2. Button Code Table
122
DP-MB545/537/536 series
10.1.3. Print Test Pattern
1. NO.01
2. NO.06
3. NO.03
• These print test patterns are just image printing,
and different from actual ones.
• When it is required to judge the print quality,
compare with the printing of a nondefective machine.
123
DP-MB545/537/536 series
11 Service Mode
The programming functions are used to program the various features and functions of the machine, and to test the machine.
This facilitates communication between the user and the service man while programming the unit.
This facilitates communication between the user and the service man while programming the unit.
11.1. Programming and Lists
11.1.1. Operation
There are 2 basic categories of programming functions, the User Mode and the Service Mode. The Service Mode is further broken
down into the normal and special programs. The normal programs are those listed in the Operating Instructions and are available to
the user. The special programs are only those listed here and not displayed to the user. In both the User and Service Modes, there
are Set Functions and Test Functions. The Set Functions are used to program various features and functions, and the Test Func-
tions are used to test the various functions. The Set Functions are accessed by entering their code, changing the appropriate value,
then pressing the SET key. The Test Functions are accessed by entering their code and pressing the key listed on the menu. While
programming, to cancel any entry, press the STOP key.
Note:
down into the normal and special programs. The normal programs are those listed in the Operating Instructions and are available to
the user. The special programs are only those listed here and not displayed to the user. In both the User and Service Modes, there
are Set Functions and Test Functions. The Set Functions are used to program various features and functions, and the Test Func-
tions are used to test the various functions. The Set Functions are accessed by entering their code, changing the appropriate value,
then pressing the SET key. The Test Functions are accessed by entering their code and pressing the key listed on the menu. While
programming, to cancel any entry, press the STOP key.
Note:
When changing the set values on the service function table, they should not be set beyond the local regulation.
Follow the laws and regulations of your area.
Follow the laws and regulations of your area.
11.1.2. Operation Flow : LCD Panel model (MB536)
124
DP-MB545/537/536 series
11.1.3. Operation Flow: Touch Panel model (MB537/545)
Click on the first or last page to see other DP-MB545 / DP-MB537 / DP-MB536 / DA-FAP109 / DA-FAP110 service manuals if exist.