Panasonic FA-S680 Service Manual ▷ View online
3-3
Maintenance
Red
Black
1
2
3
3
4
4
SV008
1
1
2
(1) Replacement of the stapler assembly (continued)
1
Remove the screws. (x2)
2
Remove the stapler swing motor.
4
1
Remove the stapler harness from LWS
and the safety switch terminals.
(Note: When installing, the terminal of the
harness should be returned to the
position indicated in the figure)
2
Remove the spring.
3
Remove the E ring. (x2)
4
Carefully cut any ty-raps used and remove
the safety switch harness.
NOTE: The stapler assembly replacement
part does not include the safety
switch harness, the swing motor, and
the safety switch link assembly.
5
SV008
Stapler swing
motor
SV009
SV047
Re-assemble in reverse order.
NOTE: Before re-installing the staple
cartridge, you need to tap it on a
hard suface 2 to 3 times. (refer to
illustration)
6
3-4
(2) Jammed staple removal
1
Conduct the stapler assembly replacement
procedure 1, 2, 4.
Check and replace the cartridge if it is
blocked.
1
Keep the release lever pressed.
2
Slide the channel frame upwards and
remove any jammed staples.
3
Conduct the stapler assembly
replacement procedure 6.
SV004
SV005
1
Rotate the staple drive motor to obtain the
highest stapler position.
2
Clear the stapler of any foreign material
and jammed staples.
SV003
Check the anvil (base which forms the
staple).
2
1
3
1
2
1
2
4
Release
lever
Channel frame
3-5
Maintenance
(3) Cleaning of the Paper Feed Roller
1
2
1
Remove the screw and remove the
paper feed roller (upper), and clean it.
2
Clean the paper feed roller (lower)
SV012
1
1
2
(4) Cleaning of the Paper Exit Roller
1
Open the paper exit cover
2
Clean the paper exit roller
SV013
1
Paper Feed
roller (lower)
roller (lower)
Paper Feed
roller (upper)
roller (upper)
Paper exit
cover
cover
Paper
exit
roller
exit
roller
3-6
SV017
1
2
1
2
3
(5) Cleaning of the Bin Paper Detecting Sensor
1
Loosen the screw.
2
Remove the screw.
3
Remove the lower cover.
1
Remove the screw. (x1)
2
Remove the inner cover.
3
Clean the sensor LED.
SV016
SV017
(6) Lubrication of the Reed Cam
1
Open the paper exit cover.
2
Lubricate the inside of each pin.
(Molycoat type)
SV018
1
1
2
2
1
2
Lower
cover
Paper
exit
cover
exit
cover
Sensor
LED
Click on the first or last page to see other FA-S680 service manuals if exist.