Panasonic FA-S680 Service Manual ▷ View online
2-6
Cam
Cam sensor (PS4)
SV044
Stapler drive motor
Paper detecting sensor
Staple detecting sensor
(4) When the staple cartridge is empty, stapling is disabled and "Add staples" is
displayed.
Stapler swing motor (M4)
Stapler swing sensor (PS3)
Stapler
Bin
SV045
Initial position
Staple position
Stapler swing home sensor (PS2)
2-7
Mechanism
(5) When the stapler swing motor drives the stapler to the stapling position, but
the paper detecting sensor does not detect paper, the swing motor continues
to drive the stapler back to the home position.
(6) If the cam sensor does not return to it's home position with in a predetermined
time (ex. staple jam, too many copies, etc.) the stapler drive motor reverses
and an error display (E7-06) occurs.
Stapler safety switch (MS6)
Paper holder
Link
Bin
SV046
3-1
Maintenance
Section III Maintenance
Cleaning
Part name
Stapler
Staple position
Paper feed roller
(upper/lower)
(upper/lower)
Paper exit roller
Bin paper detecting sensor
Reed cam
Lubrication
Per 200,000
copies
copies
—
—
—
—
—
3.1 Maintenance areas
• The following areas should be cleaned at the prescribed interval.
Maintenance cycle
Replacement
Per 100,000
copies
copies
3-2
1
1
2
3
1
1
2
2
3
3.2 Disassembly/Assembly
(1) Replacement of the stapler assembly
1
Loosen the screws. (x2)
2
Remove the screws. (x2)
3
Remove the rear cover.
4
Remove the staple cartridge.
NOTE: Remove any staples from the
stapler if they remain after the
cartridge is removed.
1
Rear cover
SV001
SV002
1
Remove the screws. (x2)
2
Recline the stapler unit forward.
3
Disconnect the swing motor harness
connector.
2
Stapler unit
3
1
Disconnect the two (2) stapler harness
connectors and remove the stapler
harnesses from the LWS.
2
Remove the belt mounting screw. (x1)
3
Remove the stapler.
SV006
1
2
3
Click on the first or last page to see other FA-S680 service manuals if exist.