Panasonic DP-C262 / DP-C322 (serv.man2) Service Manual ▷ View online
89
APR 2005
Ver. 1.1
DP-C262/322
<Cleaning the Exit Roller>
(30) Remove 1 Screw (Y1).
(31) Remove the Exit Guide (227).
(31) Remove the Exit Guide (227).
(32) Clean the Exit Roller with a soft cloth, saturated
with isopropyl alcohol.
90
DP-C262/322
APR 2005
Ver. 1.1
2.2.7.
Lower Right Side Cover Unit
(1) Remove the Right Front Cover
.
(See sect. 2.2.5.)
(2) Remove the Right Rear Cover
.
(See sect. 2.2.5.)
(3) Remove the Sheet Bypass Tray Cover.
(See sect. 2.2.8.)
(4) Open the Lower Right Side Cover.
(See sect. 2.2.9.)
(5) Remove the Snap Ring. (See sect. 2.2.9.)
(6) Remove the Cover Stay. (See sect. 2.2.9.)
(7) Disconnect the Harness on the ADU PC Board
(6) Remove the Cover Stay. (See sect. 2.2.9.)
(7) Disconnect the Harness on the ADU PC Board
(CN406).
(8) Release the lock lever by pushing it in the
direction shown by the arrow.
(9) Remove the Lower Right Side Cover Unit by
pushing the lock lever in the direction shown by
the arrow.
the arrow.
Note:
When disassembling, exercise care not to damage
the Second Transfer Roller (STR).
the Second Transfer Roller (STR).
91
APR 2005
Ver. 1.1
DP-C262/322
<Cleaning the OHP Detection Reflector>
Clean the OHP Detection Reflector with a soft
cloth, saturated with isopropyl alcohol.
cloth, saturated with isopropyl alcohol.
Note:
When reinstalling the Lower Right Side Cover Unit,
pull the lock lever to the locked position in the
direction illustrated by the arrow.
pull the lock lever to the locked position in the
direction illustrated by the arrow.
(10) Remove 3 Screws (X5).
(11) Remove 2 Screws (Y24).
(12) Remove the Gear Assembly.
Note:
When reinstalling the Gear Assembly, make sure
that the convex part of the gear bracket and clutch
are properly positioned as illustrated.
that the convex part of the gear bracket and clutch
are properly positioned as illustrated.
92
DP-C262/322
APR 2005
Ver. 1.1
(13) Disconnect the Harness.
(14) Remove 1 Screw (Y24).
(15) Remove the Sensor Bracket (2825) Assembly.
(14) Remove 1 Screw (Y24).
(15) Remove the Sensor Bracket (2825) Assembly.
<Right Cover Open Sensor>
(16) Remove the Photo Sensor (1819).
(17) Remove 2 Screws (Y16).
(18) Remove Guide Bracket Assembly.
(18) Remove Guide Bracket Assembly.
(19) Remove the STR Unit (2535) as illustrated.
Click on the first or last page to see other DP-C262 / DP-C322 (serv.man2) service manuals if exist.