DOWNLOAD Panasonic TX-PR65VT30 Service Manual ↓ Size: 8.74 MB | Pages: 127 in PDF or view online for FREE

29

To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.

1. Unlock the cable clampers to free the cable.
2. Disconnect the connector (P9).
3. Remove the screws (

×2 

) and remove the Inlet metal.

4. Remove the screw (

×1 

) and remove the AC inlet.

To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.

1. Unlock the cable clampers to free the cable
2. Disconnect the connectors (P52, P56, P58, P62 and

P64).

3. Disconnect the connectors (P6, P11, P34 and P35).
4. Remove the screws (

×5 

) and remove the P(MAIN)-

Board.

To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.

1. Unlock the cable clampers to free the cable
2. Disconnect the connectors (P59, P61 and P63)
3. Disconnect the connector (P2).
4. Remove the screws (

×4 

) and remove the P(SUS)-

Board.

To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.

1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (P51, P55, P57 and P60).
3. Disconnect the connector (P9).
4. Remove the screws (

×4 

) and remove the P(SUB)-

Board.

30

1. Remove the claw (

×1 ).

2. Remove the Side terminal cover.
3. Remove the claw (

×1 ).

4. Remove the Bottom terminal cover.
5. Remove the screw (

×1 ).

6. Remove the USB terminal cover and USB shield metal.

7. Remove the screws (

×2 ).

8. Remove the Bottom shield metal.
9. Remove the screw (

×1 ).

10. Remove the Side shield metal.

1. Remove the Terminal covers and the Shield metals. (See

section 9.6.)

2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (A1, A6, A8, A11, A12 and

A14).

4. Disconnect the flexible cables (A20, A31, A32 and A40).
5. Remove the screw (

×1 

) and remove the A-Board.

1. Disconnect the connector (C14).
2. Remove the claws (

×2 

) and remove the Side unit

assy.

3. Remove the screw (

×1 ).

4. Remove the Side unit mount metal.

31

1. Disconnect the flexible cables (SU1, SU2, SU3, SU4 and

SU5) connected to the SU-Board.

2. Disconnect the flexible cable (SU11-SD11) and the bridge

connector (SC41-SU41).

3. Remove the screws (

×3 , 

×2 

) and remove the SU-

Board.

1. Disconnect the flexible cables (SD1, SD2, SD3, SD4 and

SD5) connected to the SD-Board.

2. Disconnect the flexible cable (SU11-SD11) and the bridge

connectors (SC42-SD42 and SC46-SD46).

3. Remove the screws (

×3 , 

×2 

) and remove the SD-

Board.

1. Remove the SU-Board and SD-Board. (See section 9.9.

and 9.10.)

2. Disconnect the connector (SC2).
3. Disconnect the flexible cable (SC20).
4. Remove the screws (

×9 

) and remove the SC-Board.

THERMAL CONDUCTIVE SHEET between Plasma Dis-
play Panel and SC-board should not be removed when
replacing SC-board.

1. Disconnect the connector (SS11).
2. Disconnect the flexible cable (SS33).
3. Disconnect the flexible cables (SS64, SS65 and SS66).
4. Remove the screws (

×7 , 

×3 

) and remove the SS-

Board.

32

1. Remove the SS-Board. (See section 9.12.)
2. Disconnect the flexible cable (SS69).
3. Remove the screws (

×2 

) and remove the SS2-Board.

1. Unlock the cable clampers to free the cable.
2. Remove the screws (

×3 ).

3. Remove the Relay connector and remove the Fan.

1. Unlock the cable clampers to free the cable.
2. Remove the screws (

×4 , 

×6 

) and remove the SP

shield metal L.

3. Remove the screws (

×4 , 

×6 

) and remove the SP

shield metal R.

4. Disconnect the Relay connector.
5. Remove the screws (

×2 

 each) and remove the Speak-

ers (L, R).

1. Unlock the cable clampers to free the cable.
2. Disconnect the Relay connector.
3. Remove the screws (

×4 

) and remove the Woofer.