DOWNLOAD Panasonic TX-PR54Z11 / TX-PR54Z1M / TU-Z100R / SP-R54Z1 Service Manual ↓ Size: 26.96 MB | Pages: 127 in PDF or view online for FREE

33

1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (PB1, PB2, PB3, PB4, PB5

and PB6).

3. Remove the screws (

×4 

) and remove the PB-Board.

1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (GH10 and GH11).
3. Remove the screws (

×4 

) and remove the GH-Board.

4. Remove the screws (

×2 

) and remove the HDMI shield

metal.

1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (DA1, DA3, DA4, DA6, DA10,

DA30 and DA52).

3. Disconnect the flexible cables (DA11, DA20, DA31 and

DA32).

4. Remove the screws (

×7 

) and remove the DA-Board. 

5. Remove the screws (

×2 

)  and remove the Partition

DA-Board.

1. Remove the Bottom plate (L). (See section 8.2.5.)
2. Disconnect the connector (S1).
3. Remove the screws (

×2 

) and remove the S-Board.

1. Remove the Bottom plate (C). (See section 8.2.5.)
2. Disconnect the connector (KA1).
3. Remove the screws (

×2 

) and remove the KA-Board.

34

1. Remove the Bottom plate (C). (See section 8.2.5.)
2. Remove the screws (

×2 

) and remove the SG-Board

unit.

3. Remove the screw (

×1 ).

4. Remove the claws (

×2 ).

5. Disconnect the connector (SG52).
6. Remove the SG-Board from SG-Board bracket.

1. Remove the Bottom plate (C). (See section 8.2.5.)
2. Disconnect the connector (GL02).
3. Remove the screws (

×2 

) and remove the GL-Board.

1. Remove the Bottom plate (R). (See section 8.2.5.)
2. Disconnect the flexible cable (J1).
3. Disconnect the connector (J2).
4. Remove the claws (

×2 

) and remove the J-Board.

1. Disconnect the connectors (SPL and SPR).
2. Remove the screw (

×1 

) and remove the SP connector

edge cover (L, R).

35

1. Remove the screws (

×2 ).

2. Remove the Partition SU-Board.
3. Remove the flexible cables (SU1B, SU2B, SU3B, SU4B

and SU5B) connected to the SU-Board.

4. Remove the flexible cable (SU11-SD11) and the bridge

connector (SC41-SU41).

5. Remove the molding prop (

×1 ).

6. Remove the screws (

×2 

) and remove the SU-Board.

1. Remove the flexible cables (SD1B, SD2B, SD3B, SD4B

and SD5B) connected to the SD-Board.

2. Remove the flexible cable (SU11-SD11) and the bridge

connectors (SC42-SD42 and SC46-SD46).

3. Remove the molding prop (

×1 ).

4. Remove the screws (

×2 , 

×2 

) and remove the SD-

Board.

1. Remove the SU-Board and SD-Board. (See section

8.2.19 and 8.2.20.)

2. Unlock the cable clampers to free the cable.
3. Disconnect the connector (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (

×9 

) and remove the SC-Board.

36

1. Disconnect the bridge connector (SS21-SS22) and dis-

connect the flexible cable (SS58).

2. Disconnect the connectors (SS35 and SS36).
3. Remove the screws (

×5 

) and remove the SS2-Board. 

1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (SS11, SS12 and SS33).
3. Disconnect the flexible cables (SS53, SS55 and SS56).
4. Disconnect the bridge connector (SS21-SS22).
5. Remove the screws (

×8 

) and remove the SS-Board.

1. Unlock the cable clampers to free the cable.
2. Remove the DD-Heat-sink fastening screws (

×10 ).

3. Remove the DD-Heat-sink (

×5).

4. Disconnect the flexible cables (CB1, CB2, CB3, CB4 and

CB5).

5. Disconnect the flexible cable (C10).
6. Remove the screws (

×4 

) and remove the C1-Board.

1. Unlock the cable clampers to free the cable.
2. Remove the DD-Heat-sink fastening screws (

×10 ).

3. Remove the DD-Heat-sink (

×5).

4. Disconnect the flexible cables (CB6, CB7, CB8, CB9 and

CB10).

5. Disconnect the flexible cables (C20, C21, C22 and C26).
6. Remove the screws (

×4 

) and remove the C2-Board.