Panasonic TX-PR54Z11 / TX-PR54Z1M / TU-Z100R / SP-R54Z1 Service Manual ▷ View online
13
5.1.2.
Monitor mode
5.1.2.1.
How to access
1. Select [Monitor] in Service Mode of Tuner box.
2. Press [OK] button on the remote control.
2. Press [OK] button on the remote control.
5.1.2.2.
How to enter into Service Mode of the Display unit
While pressing [VOLUME ( - )] button of the Display unit, press [0] button of the remote control three times within 2 seconds.
Service mode of the Display unit sees section 5.2.
Service mode of the Display unit sees section 5.2.
14
5.1.2.3.
How to enter into Self-check of the Display unit
Self-check indication only:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the Display unit, press [OK] button on the remote control
for more than 3 seconds.
Self-check indication and forced to factory shipment setting:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the Display unit, press [MENU] button on the remote
control for more than 3 seconds.
Self-check of the Display unit sees section 6.1.2.
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the Display unit, press [OK] button on the remote control
for more than 3 seconds.
Self-check indication and forced to factory shipment setting:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the Display unit, press [MENU] button on the remote
control for more than 3 seconds.
Self-check of the Display unit sees section 6.1.2.
15
5.1.3.
Service tool mode
5.1.3.1.
How to access
1. Select [SRV-TOOL] in Service Mode.
2. Press [OK] button on the remote control.
2. Press [OK] button on the remote control.
5.1.3.2.
Display of SOS History
SOS History (Number of LED blinking) indication.
From left side; Last SOS, before Last, three occurrence before, 2nd occurrence after shipment, 1st occurrence after shipment.
This indication will be cleared by [Self-check indication and forced to factory shipment setting].
From left side; Last SOS, before Last, three occurrence before, 2nd occurrence after shipment, 1st occurrence after shipment.
This indication will be cleared by [Self-check indication and forced to factory shipment setting].
5.1.3.3.
POWER ON Time, On/Off
Note : To display Time, On/Off menu, highlight position, then press MUTE for 3sec.
Time : Cumulative power on time, indicated hour : minute by decimal
On/Off : Number of On/Off switching by decimal
Note : This indication will not be cleared by either of the self-checks or any other command.
Time : Cumulative power on time, indicated hour : minute by decimal
On/Off : Number of On/Off switching by decimal
Note : This indication will not be cleared by either of the self-checks or any other command.
5.1.3.4.
Exit
1. Disconnect the AC cord from wall outlet.
16
5.2.
Display unit
5.2.1.
How to enter into Service Mode
Service mode of display unit have 2 versions.
1. Separate mode: Normal mode (Connect the Display unit and Tuner Box).
Enter: Monitor mode (See section 5.1.2.).
2. Stand alone mode: WB-ADJ mode (Connect the Display unit and HDMI equipment (Ex. DIGA) with HDMI cable).
Tools: IR remote control (Recommended IR remote control 09’ PDP / LCD models).
Enter: While pressing [VOLUME (-)] button of the Display unit, press [0] button of the IR remote control 3 times within 2 sec-
onds.
Enter: While pressing [VOLUME (-)] button of the Display unit, press [0] button of the IR remote control 3 times within 2 sec-
onds.
5.2.1.1.
Key command
[1] button...Main items Selection in forward direction
[2] button...Main items Selection in reverse direction
[3] button...Sub items Selection in forward direction
[4] button...Sub items Selection in reverse direction
[RED] button...All Sub items Selection in forward direction
[GREEN] button...All Sub items Selection in reverse direction
[VOL] button...Value of sub items change in forward direction ( + ), in reverse direction ( - )
[2] button...Main items Selection in reverse direction
[3] button...Sub items Selection in forward direction
[4] button...Sub items Selection in reverse direction
[RED] button...All Sub items Selection in forward direction
[GREEN] button...All Sub items Selection in reverse direction
[VOL] button...Value of sub items change in forward direction ( + ), in reverse direction ( - )
Click on the first or last page to see other TX-PR54Z11 / TX-PR54Z1M / TU-Z100R / SP-R54Z1 service manuals if exist.