Panasonic TH-80LF50ER Service Manual ▷ View online
About lead free solder (PbF)
Note: Lead is listed as (Pb) in the periodic table of elements.
In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder.
The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu).
That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.
This model uses Pb Free solder in it’s manufacture due to environmental conservation issues. For service and repair work,
we’d suggest the use of Pb free solder as well, although Pb solder may be used.
PCBs manufactured using lead free solder will have the PbF within a leaf Symbol
stamped on the back of PCB.
Caution
Pb free solder has a higher melting point than standard solder. Typically the melting point is 50 ~ 70 °F (30~40°C)
higher. Please use a high temperature soldering iron and set it to 700 ± 20 °F (370 ± 10 °C).
higher. Please use a high temperature soldering iron and set it to 700 ± 20 °F (370 ± 10 °C).
Pb free solder will tend to splash when heated too high (about 1100 °F or 600 °C).
If you must use Pb solder, please completely remove all of the Pb free solder on the pins or solder area before
applying Pb solder. If this is not practical, be sure to heat the Pb free solder until it melts, before applying Pb solder.
If you must use Pb solder, please completely remove all of the Pb free solder on the pins or solder area before
applying Pb solder. If this is not practical, be sure to heat the Pb free solder until it melts, before applying Pb solder.
After applying PbF solder to double layered boards, please check the component side for excess solder which may
flow onto the opposite side. (see Fig.3)
flow onto the opposite side. (see Fig.3)
Suggested Pb free solder
There are several kinds of Pb free solder available for purchase. This product uses Sn+Ag+Cu (tin, silver, copper) solder.
However, Sn+Cu (tin, copper), Sn+Zn+Bi (tin, zinc, bismuth) solder can also be used. (see Fig.4)
However, Sn+Cu (tin, copper), Sn+Zn+Bi (tin, zinc, bismuth) solder can also be used. (see Fig.4)
Fig.3
Fig.4
5
Applicable Input Signals
*Mark: applicable input signal
Signal
name
Horizontal
frequency
(kHz)
Vertical
frequency
(Hz)
RGB IN
(Dot clock (MHz)
PC IN
(Dot clock (MHz)
DVI-D IN
(Dot clock (MHz)
HDMI
1 640x400@70Hz
31.46 70.07 * (25.17)
* (25.17)
2 640x480@60Hz
31.47 59.94 *
(25.18)
* (25.18)
* (25.18)
*
3 640x480@72Hz
37.86 72.81 * (31.5)
* (31.5)
4 640x480@75Hz
37.50 75.00 * (31.5)
* (31.5)
5 640x480@85Hz
43.27 85.01 * (36.0)
* (36.0)
6 800x600@56Hz
35.16 56.25 * (36.0)
* (36.0)
7 800x600@60Hz
37.88 60.32 *
(40.0)
* (40.0)
* (40.0)
*
8 800x600@72Hz
48.08 72.19 * (50.0)
* (50.0)
9 800x600@75Hz
46.88 75.00 * (49.5)
* (49.5)
10 800x600@85Hz
53.67
85.06
* (56.25)
* (56.25)
11 852x480@60Hz
31.47
59.94
*
(33.24)
*
12 1,024x768@50Hz
39.55
50.00
*
(51.89)
*
13 1,024x768@60Hz
48.36
60.00 *
(65.0)
* (65.0)
* (65.0)
*
14 1,024x768@70Hz
56.48
70.07
* (75.0)
* (75.0)
15 1,024x768@75Hz
60.02
75.03
* (78.75)
* (78.75)
16 1,024x768@85Hz
68.68
85.00
* (94.5)
* (94.5)
17 1,066x600@60Hz
37.64
59.94
*
(53.0)
*
18 1,152x864@60Hz
53.70
60.00
*
(81.62)
*
19 1,152x864@75Hz
67.50
75.00
* (108.0)
* (108.0)
20 1,280x768@60Hz
47.70
60.00
* (80.14)
* (80.14)
21 1,280x960@60Hz
60.00
60.00
* (108.0)
* (108.0)
22 1,280x960@85Hz
85.94
85.00
* (148.5)
* (148.5)
23 1,280x1,024@60Hz
63.98
60.02 * (108.0)
* (108.0)
* (108.0)
*
24 1,280x1,024@75Hz
79.98
75.02
* (135.0)
* (135.0)
25 1,280x1,024@85Hz
91.15
85.02
* (157.5) * 1
26 1,366x768@50Hz
39.55
50.00
*
(69.92)
*
27 1,366x768@60Hz
48.36
60.00 *
(86.71)
* (86.71)
* (87.44)
*
28 1,400x1,050@60Hz
65.22
60.00
*
(122.61)
*
29 1,600x1,200@60Hz
75.00
60.00 * (162.0)
* (162.0)
* (162.0)
*
30 1,920x1,080@60Hz
67.50
60.00 * (148.5)
* (148.5)
* (148.5)
*
31 1,920x1,200@60Hz
74.04
59.95
*
(154.0)
*
32 Macintosh 13‘‘ (640 x 480)
35.00
66.67
* (30.24)
* (30.24)
33 Macintosh 16‘‘ (832 x 624)
49.72
74.55
* (57.28)
* (57.28)
34 Macintosh 21‘‘ (1,152 x 870)
68.68
75.06
* (100.0)
* (100.0)
PC signals
6
*Mark:applicable input signal
*
1: Based on SMPTE 274M standard.
*
2: Based on SMPTE RP211 standard.
Signal
name
Horizontal
frequency
(kHz)
Vertical
frequency
(Hz)
Component IN
(Dot clock (MHz)
DVI_IN
(Dot clock (MHz)
HDMI
1
525(480)/60i
15.73
59.94
*(13.5)
*(27.0)
*
2
525(480)/60p
31.47
59.94
*(27.0)
*(27.0)
*
3
625(575)/50i
15.63
50.00
*(13.5)
4
625(576)/50i
15.63
50.00
*(27.0)
*
5
625(575)/50p
31.25
50.00
*(27.0)
6
625(576)/50p
31.25
50.00
*(27.0)
*
7
750(720)/60p
45.00
60.00
*(74.25)
*(74.25)
*
8
750(720)/50p
37.50
50.00
*(74.25)
*(74.25)
*
9
1.125(1.080)/60p 67.50
60.00
*(148.5)
*
1
*(148.5)
*
10 1.125(1.080)/60i 33.75
60.00
*(74.25)
*
1
*(74.25)
*
11 1.125(1.080)/50p 56.25
50.00
*(148.5)
*
1
*(148.5)
*
12 1.125(1.080)/50i 28.13
50.00
*(74.25)
*
1
*(74.25)
*
13 1.125(1.080)/24sF 27.00
48.00
*(74.25)
*
2
14 1.125(1.080)/30p 33.75
30.00
*(74.25)
*
1
*(74.25)
*
15 1.125(1.080)/25p 28.13
25.00
*(74.25)
*
1
*(74.25)
*
16 1.125(1.080)/24p 27.00
24.00
*(74.25)
*
1
*(74.25)
*
Signal
name
Horizontal
frequency
(kHz)
Vertical
frequency
(Hz)
1 NTSC
15.73 59.94
2 PAL
15.63 50.00
3 PAL60
15.73 59.94
4 SECAM
15.63 50.00
5 NTSC
4.43
15.73 59.94
6 PAL
N
15.63 50.00
7 PAL
M
15.73 59.94
Component signals
Video signals
(VIDEO)
7
Specifications
Power Source:
220-240V AC, 50/60 Hz
Power Consumption:
Power on:
Power on:
380W
Stand-by condition:
0.5W
Power off condition:
0.3W
LCD Display panel:
L5EDDYY00434
16:9 aspect ratio
Screen size:
Wight:
Height:
Diagonal:
1,771mm 996mm 2,032mm
(No. of pixels)
2,073.600 (1,920 (W) x 1,080 (H))
Operating Conditions:
Temperature: 0°C
÷
40°C
Humidity:
20%
÷
80%
Applicable signals:
Colour System:
NTSC, PAL, PAL60, SECAM, NTSC 4.43, PAL M, PAL N
Scanning Format:
525 (480) / 60i, 60p
625 (575) / 50i, 50p
750 (720) / 60p, 50p
1,125 (1,080) / 60i, 60p, 50i, 50p, 24p, 25p, 30p, 24sF
PC signals:
VGA, SVGA, XGA, SXGA, UXGA ....(compressed)
Horizontal scanning frequency 30 – 110 kHz
Vertical scanning frequency 48 – 120 Hz
Connection Terminals:
VIDEO IN
BNC
1.0 Vp-p (75
Ω
)
AUDIO L-R
RCA Pin jack x 2
0.5 Vrms
HDMI
Type A Connectors
COMPONENT/RGB IN:
G/Y
BNC
with sync 1.0 Vp-p (75
Ω
)
B/P
B
/C
B
BNC
0.7 Vp-p (75
Ω
)
R/P
R
/C
R
BNC
0.7 Vp-p (75
Ω
)
AUDIO L-R
RCA Pin jack x 2
0.5 Vrms
DVI-D IN
DVI-D 24 Pin x 2
Compliance with DVI Revision 1.0
Content Protection
Compatible with HDCP 1.1
AUDIO
Stereo mini jack (M3) x 1
0.5 Vrms (Shared with PC IN)
DVI-D OUT
DVI-D 24 Pin x 2
Compliance with DVI Revision 1.0
PC IN
High-Density Mini D-sub 15PIN G: with sync 1.0 Vp-p (75
Ω
)
: without sync 0.7 Vp-p (75
Ω
)
B: 0.7 Vp-p (75
Ω
)
R: 0.7 Vp-p (75
Ω
)
HD/VD: 1.0-5.0 Vp-p (hight impedance)
AUDIO
Stereo mini jack (M3) x 1
0.5 Vrms (Shared with DVI-D IN)
SERIAL IN
External Control Terminal
SERIAL OUT
D-sub 9 Pin x 2
RS-232C compatible
SLOT 2.0
Yes
AUDIO OUT L-R
RCA PIN JACK
x 2
(INPUT 1 kHz / 0 dB, 10 K
Ω
Load)
LAN
RJ45 10BASE-T/100BASE-TX, compatible with PJLink™
Accessories supplied :
Remote Control
2 x R6 (UM3) Batteries
Dimensions:
Width: Height: Depth:
1,848mm 1,073mm 89mm
Weight:
60.0 kg
Specifications are subject to change without notice.
Mass and dimensions shown are approximate.
8
Click on the first or last page to see other TH-80LF50ER service manuals if exist.