Panasonic TH-65VX300ER Service Manual ▷ View online
5
TH-65VX300ER
2.2.
About lead free solder (PbF)
Note: Lead is listed as (Pb) in the periodic table of elements.
In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder.
The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu).
That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.
In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder.
The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu).
That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.
This model uses Pb Free solder in it’s manufacture due to environmental conservation issues. For service and repair work, we’d
suggest the use of Pb free solder as well, although Pb solder may be used.
PCBs manufactured using lead free solder will have the PbF within a leaf Symbol PbF stamped on the back of PCB.
Caution
suggest the use of Pb free solder as well, although Pb solder may be used.
PCBs manufactured using lead free solder will have the PbF within a leaf Symbol PbF stamped on the back of PCB.
Caution
• Pb free solder has a higher melting point than standard solder. Typically the melting point is 50 ~ 70
°F (30~40 °C) higher. Please
use a high temperature soldering iron and set it to 700 ± 20
°F (370 ± 10 °C).
• Pb free solder will tend to splash when heated too high (about 1100
°F or 600 °C).
If you must use Pb solder, please completely remove all of the Pb free solder on the pins or solder area before applying Pb sol-
der. If this is not practical, be sure to heat the Pb free solder until it melts, before applying Pb solder.
der. If this is not practical, be sure to heat the Pb free solder until it melts, before applying Pb solder.
• After applying PbF solder to double layered boards, please check the component side for excess solder which may flow onto the
opposite side. (see figure below)
Suggested Pb free solder
There are several kinds of Pb free solder available for purchase. This product uses Sn+Ag+Cu (tin, silver, copper) solder. How-
ever, Sn+Cu (tin, copper), Sn+Zn+Bi (tin, zinc, bismuth) solder can also be used.
ever, Sn+Cu (tin, copper), Sn+Zn+Bi (tin, zinc, bismuth) solder can also be used.
6
TH-65VX300ER
3 Service Navigation
3.1.
Service Hint
Board Name
Function
Board Name
Function
A
Digital Signal Processor, Microcomputer
Audio Processor, Speaker Out Amplifier
Audio Processor, Speaker Out Amplifier
C1
Data drive (Right)
C2
Data drive (Centre)
DS
Slot Interface
C3
Data drive (Left)
D
Format Converter, Plasma AI Processor
Sub-Field Processor, Sync Processor
Sub-Field Processor, Sync Processor
S1
Power switch
V1
Remote receiver, LED-G, R
SC
Scan drive
V2
Key switch
SU
Scan out (Upper)
Non serviceable.
SU-Board should be exchanged for service.
Non serviceable.
SU-Board should be exchanged for service.
P (MAIN)
Power supply
SD
Scan out (Lower)
Non serviceable.
SD-Board should be exchanged for service.
Non serviceable.
SD-Board should be exchanged for service.
P (SUS)
Power supply
SS
Sustain drive
H3
Speaker terminal
SS2
Sustain out
HX
PC / RS-232C_Input terminal, 3D Signal out, Speaker
terminal (L)
terminal (L)
7
TH-65VX300ER
3.2.
Applicable signals
8
TH-65VX300ER
4 Specifications
Product Fiche
Energy efficiency class
D
Visible screen size (diagonal)
165 cm / 65 inches
On mode average power consumption 390 W
Annual energy consumption
Annual energy consumption
569 kWh/year
Energy consumption XYZ kWh per year, based on the power consumption of the television operating
4 hours per day for 365 days. The actual energy consumption will depend on how the television is used.
Energy consumption XYZ kWh per year, based on the power consumption of the television operating
4 hours per day for 365 days. The actual energy consumption will depend on how the television is used.
Standby power consumption
0.50 W
Off mode power consumption
0.30 W
Display resolution
1,920 (W)
× 1,080 (H)
Power Source
220 - 240 V AC, 50/60 Hz
Rated power consumption
450 W
Standby power consumption
Save off 0.8 W, Save on 0.5 W
Plasma Display panel
Drive method : AC type
65-inch, 16:9 aspect ratio
65-inch, 16:9 aspect ratio
Screen size
1,434 mm (W)
× 806 mm (H) × 1,645 mm (diagonal)
(No.of pixels)
2,073,600 (1,920 (W)
× 1,080 (H)) [5,760 × 1,080 dots]
Operating condition
Temperature
0
°C - 40 °C
Humidity
20 % - 80 %
Applicable signals
Scanning format
525 (480) / 60i 60p, 625 (575) / 50i 50p, 750 (720) / 60p 50p, 1125 (1080) /
60i 60p 50i 50p 24p 25p 30p 24sF, 1250 (1080) / 50i
60i 60p 50i 50p 24p 25p 30p 24sF, 1250 (1080) / 50i
PC signals
VGA, SVGA, XGA, SXGA
UXGA ..... (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
UXGA ..... (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Connection terminals
LAN
RJ45 10BASE-T/100BASE-TX, compatible with PJLink
TM
AV IN
HDMI 1-2
TYPE A Connector
× 2
COMPONENT / RGB IN
Y / G
RCA Pin jack
with sync 1.0 Vp-p (75-ohm)
P
B
/C
B
/B
RCA Pin jack
0.7 Vp-p (75-ohm)
P
R
/C
R
/R
RCA Pin jack
0.7 Vp-p (75-ohm)
AUDIO L-R RCA Pin jack
× 2
0.5 Vrms
PC IN
High-Density Mini D-sub 15 Pin
Y or G with sync 1.0 Vp-p (75-ohm)
Y or G without sync 0.7 Vp-p (75-ohm)
P
Y or G without sync 0.7 Vp-p (75-ohm)
P
B
/ C
B
/ B:0.7 Vp-p (75-ohm)
P
R
/ C
R
/ R:0.7 Vp-p (75-ohm)
HD / VD:1.0 - 5.0 Vp-p (high impedance)
VBS (use HD port)
with picture 1.0 Vp-p (high impedance)
without picture 0.3 Vp-p (high impedance)
without picture 0.3 Vp-p (high impedance)
AUDIO
Stereo mini jack (M3)
× 1
0.5 Vrms
SERIAL
External Control Terminal
D-sub 9 Pin
D-sub 9 Pin
RS-232C compatible
3D IR TRANSMITTER
for 3D IR TRANSMITTER
3D SHUTTER OUT M3 jack
3D SHUTTER OUT M3 jack
× 1
DC 8V OUT Centre plus, for EIAJ 4mm plug
EXT SP
8-ohm, 20 W [10 W + 10 W] (10 % THD)
Accessories Supplied
Remote Control Transmitter
N2QAYB000688
Batteries
R6 (UM3) Size
× 2
Clamper
TMME289
× 1
Ferrite core
J0KG00000014
× 2
Dimensions (W
× H × D)
1,554 mm
× 924 mm × 94 mm
Mass (weight)
main unit only
approx. 60.0 kg net
with speakers
approx. 66.0 kg
Notes:
• Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.
• This equipment complies with the EMC standards listed below.
• This equipment complies with the EMC standards listed below.
EN55022, EN55024, EN61000-3-2, EN61000-3-3.
• Product fiche: Based on (EU) No.1062/2010 ANNEX III
• ENERGY LABEL attached on the back cover is only for European countries.
• ENERGY LABEL attached on the back cover is only for European countries.
Click on the first or last page to see other TH-65VX300ER service manuals if exist.