Panasonic TH-65VX300ER Service Manual ▷ View online
29
TH-65VX300ER
17. Remove the Fan-Duct Barrier (B).
18. Remove the flexible cables from the connectors (SU1,
SU2, SU3, SU4, SU5, SU11, SD1, SD2, SD3, SD4, SD5,
SD11).
SD11).
19. Disconnect the connectors (SD42, SD46, SU41).
20. Remove 5 screws ( ).
20. Remove 5 screws ( ).
21. Remove 4 screws ( ) and then remove SU-Board and
SD-Board.
22. Disconnect the connector (SC2).
23. Remove 9 screws and then remove SC-Board.
23. Remove 9 screws and then remove SC-Board.
24. Disconnect the connector (SS11).
25. Remove the flexible cables from the connectors (C33,
25. Remove the flexible cables from the connectors (C33,
SS64, SS65, SS66, SS69).
26. Remove 9 screws ( ).
30
TH-65VX300ER
27. Remove 3 screws ( ) and then remove SS-Board and
SS2-Board.
28. Disconnect the connectors (P51, P53, P55).
29. Remove 8 screws and then remove P(MAIN)-Board.
29. Remove 8 screws and then remove P(MAIN)-Board.
30. Remove 6 screws and then remove P(SUS)-Board.
31. Remove the flexible cables from the connectors (C10,
C20, C26, C36).
32. Remove the P Print Barrier (A, B), Duct Barrier (A) and
Barrier.
31
TH-65VX300ER
33. Remove 22 screws and then remove the Contact
Metal(top, left, right).
34. Remove 12 screws and then remove the Hanger Assy (L,
R).
35. Exchange the Plasma Display Panel.
32
TH-65VX300ER
10 Measurements and Adjustments
10.1. Adjustment
10.1.1. Vsus selection
Caution:
When Plasma panel or D-board is replaced, Vsus should be set to LOW or HIGH.
Procedure
1. Access the CAT mode.
Press and hold the Volume down / - button on the front panel of the unit and press the [RECALL] button on the remote con-
trol 3 times quickly within 2 second, this will place the unit into the CAT mode.
trol 3 times quickly within 2 second, this will place the unit into the CAT mode.
2. Select the IIC mode.
3. Go into item [VSUS] in the IIC mode by Up / Down buttons. LOW or HIGH will be displayed.
4. Press [OK] button to go to TEST stage.
3. Go into item [VSUS] in the IIC mode by Up / Down buttons. LOW or HIGH will be displayed.
4. Press [OK] button to go to TEST stage.
White pattern without On-Screen Display will be displayed during TEST and CONF stage. Press [RECALL] button to display
the On-Screen Display.
the On-Screen Display.
5. Press [0] button to set to LOW.
6. In LOW setting
6. In LOW setting
a. If no several dead pixel is visible remarkably in white pattern, press [RIGHT] button to go to CONF stage.
b. If the several dead pixels are visible remarkably in white pattern, Set to HIGH by press [8] button. Press [RIGHT] button to
b. If the several dead pixels are visible remarkably in white pattern, Set to HIGH by press [8] button. Press [RIGHT] button to
go to CONF stage if the symptom is improved.
7. Press [OK] button in CONF stage to store LOW or HIGH.
8. Exit Service Mode by pressing [Power] button.
8. Exit Service Mode by pressing [Power] button.
Click on the first or last page to see other TH-65VX300ER service manuals if exist.