Panasonic TH-65VX300ER Service Manual ▷ View online
25
TH-65VX300ER
2. Remove 6 screws ( ) and then remove Contact Metal
(bottom).
3. Remove the flexible cable from the connector (C10).
4. Remove 3 screws ( ).
5. Remove the flexible cables from the connectors (CB1,
4. Remove 3 screws ( ).
5. Remove the flexible cables from the connectors (CB1,
CB2, CB3) and then remove C1-Board.
9.17. Removal of C2-Board
1. Remove the Contact Metal (bottom).
(Refer to remove of C1-Board).
2. Remove the flexible cables from the connectors (C20,
C21, C26).
3. Remove 4 screws ( ).
4. Remove remove the flexible cables from the connectors
4. Remove remove the flexible cables from the connectors
(CB4, CB5, CB6, CB7, CB8, CB9) and then remove C2-
Board.
Board.
9.18. Removal of C3-Board
1. Remove the Fan Block (C).
(Refer to remove of Fan).
2. Remove 6 screws and then remove the Hanger Assy (L)
and the Stand Pole Bracket Assy (L).
1. Remove the Contact Metal (Bottom).
(Refer to remove of C1-Board).
2. Disconnect the connector (C35).
3. Remove the flexible cables from the connectors (C31,
3. Remove the flexible cables from the connectors (C31,
C33, C36).
4. Remove the flexible cables from the connectors (CB10,
CB11, CB12, CB13, CB14, CB15).
5. Remove 4 screws ( ) and then remove C3-Board.
9.19. Removal of S1-Board
1. Remove 2 screws (B) and then remove the S1-Board
Block.
2. Disconnect the connector (S34).
3. Remove 1 screw (C) and then remove S1-Board.
4. Remove the Switch Attachment from S1-Board.
3. Remove 1 screw (C) and then remove S1-Board.
4. Remove the Switch Attachment from S1-Board.
26
TH-65VX300ER
9.20. Removal of Front Glass, V, V1,
V2-Board and Cabinet Assy
1. Remove the S1-Board Block.
(Refer to Removal of S1-Board)
2. Disconnect the connectors (A11, A22).
3. Disconnect the Relay connectors (A33-V1).
4. Remove 18 screws ( ).
3. Disconnect the Relay connectors (A33-V1).
4. Remove 18 screws ( ).
5. Pull the bottom of the Cabinet Block forward and lift.
9.20.1. Removal of Front Glass
1. Remove 23 screws and then remove the Fixed Angle
(left, right, upper-rear, bottom-rear).
2. Remove the Front Glass.
Note: when fixing Glass Holder (upper-rear, bottom-
rear)
• When the glass holder is tightened in the screw, it does
so that the positioned front glass should not move.
• There must not be floatage in glass holder and the
screw.
• After insertion, glass holder tighten the screw in the rib in
the medial aspect in the cabinet.
Note: when Front Glass is exchanged
• Stick all Sponges on the Front-Glass.
• Attach them without uplift and peeling.
• As sticking them, avoid causing any space between the
• Attach them without uplift and peeling.
• As sticking them, avoid causing any space between the
Sponge and the joint part in each corner for a prevention
of dirt and dust.
of dirt and dust.
Note
• The sponges are parts which cannot be recycled. Please
use the new article when you exchange the Front Glass.
9.20.2. Removal of V1-Board and V2-Board
1. Remove 1 screws ( ).
2. Remove 1 screws ( ) and then remove V2-Board Fixing
2. Remove 1 screws ( ) and then remove V2-Board Fixing
Metal.
3. Remove 1 screw (D).
27
TH-65VX300ER
4. Remove 3 Hooks and then remove the Power Button and
Power Button Spring.
5. Disconnect the connector (V11) and then remove V1-
Board.
6. Disconnect the connector (V22) and then remove V2-
Board.
7. Remove 2 hooks and then remove the 5 Key Button from
V2-Board.
8. Remove each 2 screws (E) and then remove the V-Board
from the Emitter Fixing Spring.
9. Disconnect the connectors (v1).
9.20.3. Removal of Cabinet Assy
1. Remove the Front Glass.
(Refer to Removal of Front Glass)
2. Remove V1-Board and V2-Board.
(Refer to Removal of V1-Board and V2-Board)
3. Remove the LED Panel and Remote Sensor Panel and
then remove the Cabinet Assy.
9.21. Removal of Plasma Display
Panel
The C1,C2,C3 Boards are connected with the plasma dis-
play panel for the repair.
play panel for the repair.
1. Remove the S1-Board Block.
(Refer to Removal of S1-Board)
2. Disconnect the connectors (A11, A22).
3. Remove 18 screws.
3. Remove 18 screws.
4. Pull the bottom of the Cabinet Block forward and lift.
5. Disconnect the Fan Relay Connectors.
28
TH-65VX300ER
6. Remove 7 screws and then remove the Fan Block (A),
(B) and the Fan Block (C).
7. Disconnect the connectors (DS13, P9).
8. Remove the flexible cable from the connector (DS1).
9. Remove 4 screws and then remove the Slot Block.
8. Remove the flexible cable from the connector (DS1).
9. Remove 4 screws and then remove the Slot Block.
10. Disconnect the connectors (D25, C35).
11. Remove the flexible cable from the connectors (C21,
C31, D15, D20).
12. Remove 4 screws and then remove the D-Board.
13. Remove 3 screws and then remove the HX Sub Metal.
14. Disconnect the connectors (A16, A37).
15. Remove 4 screws ( ) and then remove the A-Board
15. Remove 4 screws ( ) and then remove the A-Board
Block.
16. Remove 2 screw and then remove the Speaker Terminal
Block.
Click on the first or last page to see other TH-65VX300ER service manuals if exist.