DOWNLOAD Panasonic TH-65PB1E Service Manual ↓ Size: 10.53 MB | Pages: 127 in PDF or view online for FREE

25

TH-65PB1E

3. Turn over the HX-Board Block.
4. Disconnect the connectors (HX1).
5. Remove 2 Hexagonal-Head screws and 2 screw of HX-

Board and then remove HX-Board.

• Since a touch pen setup is come by [off] when A module is

exchanged, please set to [ON].

1. Remove the HX-Board Block.

(Refer to Removal of HX-Board)

2. Disconnect the connectors (A5, A11, A13, A16, A22,

A25).

3. Remove the flexible cables from the connectors (A1, A20,

A31, A32).

4. Remove 4 screws and then remove A-Board.

1. Disconnect the Fan Relay Connectors.
2. Remove the Clamper from the Fan Block (C).
3. Remove 7 screws and then remove the Fan Block (A),

(B), (C).

4. Remove each 1 screw and then remove the Fan from the

Fan Fixed Metal.

5. Remove each 4 SPONGE (FAN CORNER) from the Fan.

6. Reassemble the Fans in reverse order.

26

TH-65PB1E

7. Stick the Fan Sponges around the Fan.

The Fan Sponge is not re-usable.
Please use a new one when Fan exchange.

1. Disconnect the connectors (P9, P11, P16, P25, P34, P35,

P52, P54, P56).

2. Remove 8 screws and then remove P-Board (MAIN).

1. Disconnect the connectors (P2, P51, P53, P55).

2. Remove 6 screws and then remove P-Board (SUS).

1. Disconnect the connector (P9).
2. Remove 2 screws ( ) and then remove the AC Cord

Clamper A.

3. Remove 1 screw ( ) and then remove the AC Inlet Assy.

27

TH-65PB1E

1. Remove the Duct Barrier (B).

2. Remove the flexible cables from the connectors (SU1,

SU2, SU3, SU4, SU5, SU11, SD1, SD2, SD3, SD4, SD5,
SD11).

3. Disconnect the connectors (SU41, SD42, SD46).
4. Remove 5 screws ( ).

5. Remove 4 screws ( ) and then remove SU-Board and

SD-Board.

1. Remove the Duct Barrier (B).

(Refer to Removal of SU-Board and SD-Board)

2. Disconnect the connectors (SC2, SD42, SD46, SU41).
3. Remove the flexible cable from the connector (SC20).
4. Remove 9 screws ( ).
5. Remove 4 screws ( ) and then remove SC-Board.

28

TH-65PB1E

1. Remove 3 screws and then remove the HX Sub Metal.

2. Disconnect the connectors (A5, A11, A13, A16, A22,

A25).

3. Remove the flexible cables from the connectors (A1, A20,

A31, A32).

4. Remove 4 screws and then remove the A-Board Block.

5. Remove the Fan Block (C).

(Refer to remove of Fan Block).

6. Disconnect the connector (SS11).
7. Remove the flexible cables from the connectors (SS33,

SS64, SS65, SS66).

8. Remove 7 screws  ( ).

9. Remove 3 screws ( ) and then remove SS-Board.

1. Remove the SS-Board.

(Refer to remove of SS-Board).

2. Remove the flexible cable from the connector (SS69).
3. Remove 2 screws and then remove SS2-Board.

1. Remove 15 screws ( ).
2. Remove 6 screws ( ) and then remove Contact Metal

(bottom).

3. Remove the flexible cable from the connector (C10).
4. Remove 3 screws.