Panasonic TH-50PH10BK / TH-50PH10BS / TH-50PH10EK / TH-50PH10ES (serv.man2) Service Manual ▷ View online
6 Disassembly
· To disassemble P.C.B., wait for 1 minute after power was
off for discharge from electrolysis capacitors.
· and
marks indicate screw positions.
6.1. Removal of the Back Cover
1. Remove screws (×7
, ×4
, ×10
, x12
) and then
remove the Back Cover.
6.2. Removal the of HU-Board
1. Remove 4 screws (A) and then remove the HU Terminal
Block.
2. Remove 4 screws (B).
3. Remove 3 screws (C) and then remove HU-Board.
6.3. Removal of the Slot Block
1. Remove the HU Terminal Block.
(Reference to Removal of the HU-Board)
2. Remove the flexible cable from the connector (DS1).
3. Disconnect the connectors (DS2, DS4, DS6, DS7, DS8,
DS15).
4. Remove 4 screws and then remove the Slot-Block.
6.4. Removal of the DS-Board
1. Remove the HU Terminal Block.
(Reference to Removal of the HU- Board)
2. Remove the Slot Block.
(Reference to Removal of the Slot Block)
3. The Slot Block is turned inside out.
4. Remove 6 screws and then remove the Slot cover.
5. Remove 6 screws.
6. Remove the DS-Board.
9
TH-50PH10BK / TH-50PH10BS / TH-50PH10EK / TH-50PH10ES
6.5. Removal of the HX-Board
1. Remove the HU Terminal Block.
(Reference to Removal of the HU-Board)
2. Remove the Slot Block.
(Reference to Removal of the Slot Block)
3. Remove the DS-Board.
(Reference to Removal of the DS-Board)
4. Remove 2 screws and then remove the Slot Case.
5. Remove 4 Hexagonal-Head screws and 2 screws and then
remove the HX-Board.
6.6. Removal of the D-Board
1. Remove the Slot Block.
(Reference to Removal of the Slot Block)
2. Disconnect the connectors (D5, D25).
3. Remove the Flexible Cable from the connectors (D20, D31,
D32).
4. Remove 4 screws and then remove the D-Board.
6.7. Removal of the P-Board
1. Disconnect the connectors (P2, P6, P7, P9, P11, P12,
P25).
2. Remove 6 screws ( ) and then remove the P-Board Block.
6.8. Removal of the DN-Board
1. Remove the flexible cable from the connectors (DN1).
2. Disconnect the connectors (D6, D31, D33, D35).
3. Remove 4 screws and then remove the DN-Board.
10
TH-50PH10BK / TH-50PH10BS / TH-50PH10EK / TH-50PH10ES
6.9. Removal of the H3-Board (L,
R)
1. Remove each 1 screw and then remove the Speaker
Terminal Block (L, R).
2. Disconnect the connector (H37).
3. Remove 3 screws (F) and then remove the H3-Board.
6.10. Removal of the SU-Board and
the SD-Board
1. Remove the Speaker Terminal Block(R).
(Reference to Removal of the H3-Board (L, R))
2. Remove the Flexible cables (SU1, SU2, SU3, SU4,)
connected to the SU-Board and remove the connector
(SC45-SU45).
(SC45-SU45).
3. Remove 6 screws.
4. Slide the SU-Board to the left to disconnect from a
connector (SC41-SU41) on the SC-Board and remove the
SU-Board.
SU-Board.
5. Disconnect the connectors(SU45, SD46).
6. Slide the SU-Board and the SD-Board to the left, remove
the SU-Board and the SD-Board from the connectors
(SC41, SC42).
(SC41, SC42).
6.11. Removal of the SC-Board
1. Remove the SU-Board and SD-Board (Reference to
removal SU-Board and SD-Board).
2. Disconnect the connector (SC2).
3. Disconnect the flexible cable (SC20).
4. Remove 9 screws ( ) and then slide the SC-Board to the
right.
6.12. Removal of the SS2-Board and
the SS3-Board
1. Disconnect the connector (SS23).
2. Disconnect the Flexible Cable (SS52).
11
TH-50PH10BK / TH-50PH10BS / TH-50PH10EK / TH-50PH10ES
3. Disconnect the connector (SS24).
4. Disconnect the Flexible Cable (SS57).
5. Remove each 2 screws and then remove the SS2-Board
and the SS3-Board.
6.13. Removal of the SS-Board
1. Disconnect the connectors (SS11, SS12, SS21, SS22,
SS33, SS34, SS35).
2. Remove the Flexible Cable from the connectors (SS53,
SS54, SS55, SS56).
3. Remove 7 screws and then remove the SS-Board.
6.14. Removal of the stand blocks
1. Remove the plasma panel section from the servicing stand
and lay on a flat surface such as a table (covered) with the
plasma panel surface facing downward.
plasma panel surface facing downward.
2. Remove the stand blocks (left, right) fastening screws (x 4
each) and remove the stand blocks (left, right).
12
TH-50PH10BK / TH-50PH10BS / TH-50PH10EK / TH-50PH10ES
Click on the first or last page to see other TH-50PH10BK / TH-50PH10BS / TH-50PH10EK / TH-50PH10ES (serv.man2) service manuals if exist.