Panasonic TH-50PH10BK / TH-50PH10BS / TH-50PH10EK / TH-50PH10ES (serv.man2) Service Manual ▷ View online
31. Remove the plasma panel section from the servicing stand
and lay on a flat surface such as a t with the plasma panel
surface facing downward.
surface facing downward.
32. Remove the stand blocks (left, right) fastening screws (x4
each) and remove the stand blocks (left, right).
33. Remove the Flexible Cable from the connectors (C10,
C11).
34. Remove the Flexible Cable from the connector (C20).
35. Remove the connectors (C21 and C22).
36. Disconnect the connectors (C32, C33, C35).
37. Disconnect the connector (SS34).
38. Remove 2 screws(G) and then remove the S1-Board Block.
39. Disconnect the connector (S34).
40. Remove 1 screw(H) and then remove the S1-Board.
41. Remove the Flexible Cable from the connectors (C20, C21,
C22).
42. Disconnect the Fan Relay Couplers.
43. Remove each 3 screws and then remove 2 Fan Blocks.
17
TH-50PH10BK / TH-50PH10BS / TH-50PH10EK / TH-50PH10ES
44. Remove 2 screws and then remove the S1-Board Block.
45. Remove 3 screws and then remove the AC-Inlet Block.
46. Remove 6 screws of the Escutcheon.
47. Pull the bottom of the Plasma Panel forward (arrow1).
48. Slide the Plasma Panel and then remove the Plasma Panel
(arrow2).
18
TH-50PH10BK / TH-50PH10BS / TH-50PH10EK / TH-50PH10ES
7 Location of Lead Wiring
7.1. Lead Wiring (1)
The lead wiring is dressed as shown in figure.
19
TH-50PH10BK / TH-50PH10BS / TH-50PH10EK / TH-50PH10ES
7.2. Lead Wiring (2)
The lead wiring is dressed as shown in figure.
20
TH-50PH10BK / TH-50PH10BS / TH-50PH10EK / TH-50PH10ES
Click on the first or last page to see other TH-50PH10BK / TH-50PH10BS / TH-50PH10EK / TH-50PH10ES (serv.man2) service manuals if exist.