Panasonic TH-42PY85PA / TH-42PZ85BA / TH-42PZ85EA Service Manual ▷ View online
17
6.5.
Local screen failure
Plasma display may have local area failure on the screen. Fig-1 is the possible defect P.C.B. for each local area.
Fig-1
18
7 Disassembly and Assembly Instructions
7.1.
Remove the Rear cover
1. See Service Hint (Section 3)
7.2.
Remove the Bottom panel
1. Remove the screws (
×9 ).
2. Remove the Bottom panel.
7.3.
Remove the Fan unit
1. Unlock the cable clampers to free the cable.
2. Remove the screws (
×3 ).
3. Remove the relay connectors and remove the Fan unit.
4. Remove the screw (
×1
) on the back side.
5. Remove the Fan.
7.4.
Remove the PB-Board
1. Unlock the cable clampers to free the cable.
2. Remove the screws (
×2 ).
3. Disconnect the connectors (PB8, PB33, PB35, PB36 and
PB37)
4. Remove the PB-Board.
5. Remove the screws (
×2 ).
6. Remove the PB-Board metal frame.
7. Remove the clampers (
×3 ).
19
8. Remove the barrier (PB).
7.5.
Remove the P-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the couplers (P2, P6, P7, P9, P11, P12 and
2. Disconnect the couplers (P2, P6, P7, P9, P11, P12 and
P25).
3. Remove the screws (
×6
) and remove the P-Board
unit.
4. Remove the clampers (
×2 ).
5. Remove the barrier (P).
6. Remove the screws (
×20
) on the back side.
7. Remove the screws (
×7 ).
8. Remove the molding props (
×13 ).
9. Remove the P-Board.
Note:
When assembling the P-Board, the position of each hole of
the insulation sheets (A and B) is set to the position of each
the insulation sheets (A and B) is set to the position of each
hole of the P-Board, then assemble them. (
marks indi-
cate setting positions.)
20
7.6.
Remove the Rear Terminal
cover
cover
1. Remove the screws (
×3 ,
×2 ).
2. Remove the Rear Terminal cover.
7.7.
Remove the Tuner unit
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (A1, A2, A3 , A5, A6, A7, A8,
2. Disconnect the connectors (A1, A2, A3 , A5, A6, A7, A8,
A11, A12, A51 and A52).
3. Remove the screws (
×4
) and remove the Tuner unit.
7.8.
Remove the A-Board
1. Remove the Tuner unit. (See section 7.7.)
2. Remove the 2 tabs and remove the CI cover.
2. Remove the 2 tabs and remove the CI cover.
3. Remove the screws (
×8
) and remove the A-Board.
Click on the first or last page to see other TH-42PY85PA / TH-42PZ85BA / TH-42PZ85EA service manuals if exist.