Panasonic TH-42PY85PA / TH-42PZ85BA / TH-42PZ85EA Service Manual ▷ View online
21
7.9.
Remove the Side control unit
assy
assy
1. Disconnect the connectors (A52). (See section 7.7.)
2. Remove the screws (
×4
) and remove the Side control
unit assy.
7.10. Remove the GS-Board and the
Control button
1. Remove the Side control unit assy. (See section 7.9.)
2. Remove the screws (
×2 ).
3. Disconnect the connectors (GS52) and remove the GS-
Board.
4. Remove the screws (
×2 )
5. Remove the Side control mount metal from Side control
metal frame.
6. Remove the screws (
×2
) and remove the Side control
panel bottom and the Control button.
22
7.11. Remove the Side terminal unit
assy
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (GH11 and G51).
2. Disconnect the connectors (GH11 and G51).
3. Remove the screws (
×3
) and remove the Side termi-
nal unit assy.
7.12. Remove the G-Board and the
GH-board
1. Remove the Side terminal unit assy. (See section 7.11.)
2. Remove the screws (
×2
) from back side.
3. Remove the Side terminal shield.
4. Remove the screw (
×1
) and remove the Side terminal
panel bottom.
5. Remove the screws (
×2
) and remove the G-Board.
6. Remove the screws (
×2
) and remove the GH-Board.
7.13. Remove the SU-Board
1. Remove the flexible cables (SU1, SU2, SU3 and SU4)
connected to the SU-Board.
2. Remove the flexible cable (SU11-SD11) and the bridge
connector (SC41-SU41).
3. Remove the screws (
×2 ,
×2
) and remove the SU-
Board.
23
7.14. Remove the SD-Board
1. Remove the flexible cables (SD1, SD2, SD3 and SD4)
connected to the SD-Board.
2. Remove the flexible cable (SU11-SD11) and the bridge
connectors (SC42-SD42 and SC46-SD46).
3. Remove the screws (
×2 ,
×2
) and remove the SD-
Board.
7.15. Remove the SC-Board
1. Remove the SU-Board and SD-Board. (See section 7.13.
and 7.14.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connector (SC2).
4. Disconnect the flexible cable (SC20).
3. Disconnect the connector (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (
×8
) and remove the SC-Board.
7.16. Remove the SS-Board
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (SS11, SS12, SS33, SS34
2. Disconnect the connectors (SS11, SS12, SS33, SS34
and SS35).
3. Disconnect the flexible cables (SS61, SS63, SS64 and
SS66).
4. Remove the screws (
×6
) and remove the SS-Board.
7.17. Remove the Stand brackets
1. Remove the Plasma panel section from the servicing
stand and lay on a fiat surface such as a table (covered)
with the Plasma panel surface facing downward.
with the Plasma panel surface facing downward.
2. Remove the Stand brackets (L, R) fastening screws (
×4
each) and remove the Stand brackets (L, R).
24
7.18. Remove the D-Board
1. Remove the Tuner unit. (See section 7.7.)
2. Disconnect the connectors (D3, D5 and D25).
3. Disconnect the flexible cables (D20, D31, D32 and D33).
2. Disconnect the connectors (D3, D5 and D25).
3. Disconnect the flexible cables (D20, D31, D32 and D33).
4. Remove the screws (
×4
) and remove the D-Board.
7.19. Remove the C1-Board
1. Remove the Tuner unit. (See section 7.7.)
2. Remove the Side control unit assy. (See section 7.9.)
3. Remove the Stand bracket R. (See section 7.17.)
2. Remove the Side control unit assy. (See section 7.9.)
3. Remove the Stand bracket R. (See section 7.17.)
4. Remove the screws (
×3
) and Remove the Cabinet
mount metal.
5. Remove the DD-Heat-sink holder fastening screws
(
×16 ).
6. Remove the DD-Heat-sink (
×8).
7. Disconnect the flexible cables (CB1, CB2, CB3, CB4,
CB5, CB6, CB7 and CB8).
8. Disconnect the flexible cables (C10, C11 and C12).
9. Remove the screws (
×5
) and remove the C1-Board.
7.20. Remove the C2-Board
1. Remove the Tuner unit. (See section 7.7.)
2. Remove the Side terminal unit assy. (See section 7.11.)
3. Remove the stand bracket L. (See section 7.17.)
2. Remove the Side terminal unit assy. (See section 7.11.)
3. Remove the stand bracket L. (See section 7.17.)
4. Remove the screws (
×3
) and Remove the Cabinet
mount metal.
5. Remove the DD-Heat-sink holder fastening screws
(
×14 ).
6. Remove the DD-Heat-sink (
×7).
7. Disconnect the flexible cables (CB9, CB10, CB11, CB12,
CB13, CB14 and CB15).
8. Disconnect the flexible cables (C20 and C21).
9. Disconnect the connectors (C23 and C25).
9. Disconnect the connectors (C23 and C25).
10. Remove the screws (
×5
) and remove the C2-Board.
Click on the first or last page to see other TH-42PY85PA / TH-42PZ85BA / TH-42PZ85EA service manuals if exist.