Panasonic TH-103PF9UK / TH-103PF9EK Service Manual ▷ View online
9. Remove SU-Board.
6.17. Removal of SM-Board
1. Remove 2 screws and then remove the Fan Block (A).
2. Remove the flexible cables from the connectors (SM1,
SM2, SM3, SM4).
3. Disconnect the connectors (SM50, SM51, SM55, SM56).
4. Remove 8 screws.
5. Slide SM-Board to the left direction to remove SM-Board
5. Slide SM-Board to the left direction to remove SM-Board
from the connectors (SC43, SC46).
6. Remove SM-Board.
6.18. Removal of SD-Board
1. Remove 6 screws and then remove the Reinforcement
Angle (B).
21
TH-103PF9UK / TH-103PF9EK
2. Remove the flexible cables from the connectors (SD1, SD2,
SD3, SD4).
3. Disconnect the connectors (SD52, SD56).
4. Remove 9 screws.
5. Slide SD-Board to the bottom direction to remove SD-Board
5. Slide SD-Board to the bottom direction to remove SD-Board
from the connectors (SC47, SC48).
Take out so as not damage SD-Board.
Take out so as not damage SD-Board.
6. Remove SD-Board.
6.19. Removal of SC-Board
1. Remove SU-Board.
(Refer to Removal of SU-Board)
2. Remove SM-Board.
(Refer to Removal of SM-Board)
3. Remove SD-Board.
(Refer to Removal of SD-Board)
4. Disconnect the connectors (SC2, SC20, SC23, SC80,
SC81).
5. Remove 16 screws and then remove SC-Board.
6.20. Removal of SC2-Board
1. Disconnect the connectors (SC12, SC13, SC14, SC34,
SC80, SC81, SC82).
22
TH-103PF9UK / TH-103PF9EK
2. Remove 4 screws and then remove SC2-Board.
6.21. Removal of S1-Board
1. Remove the Customer Control Unit.
(Reference to Removal of the Side Angle (L), (R))
2. Remove 2 screws (R).
3. Remove 1 screw (S).
4. Disconnect a connector (S34) and then remove S1-Board.
3. Remove 1 screw (S).
4. Disconnect a connector (S34) and then remove S1-Board.
6.22. Removal of SS2-Board
1. Remove the Side Angle (L).
(Refer to Removal of the Side Angle (L))
2. Remove 6 screws and then remove the Reinforcement
Plaste (E).
3. Remove the flexible cables from the connectors (SS51,
SS52, SS53, SS54).
4. Disconnect the connectors (SS29, SS30, SS31, SS32).
5. Remove 6 screws and then remove SS2-Board.
5. Remove 6 screws and then remove SS2-Board.
23
TH-103PF9UK / TH-103PF9EK
6.23. Removal of SS3-Board
1. Remove the Side Angle (L).
(Refer to Removal of Side Angle (L))
2. Disconnect the relay connector of the Speaker Terminal (L).
3. Remove 6 screws and then remove the Reinforcement
3. Remove 6 screws and then remove the Reinforcement
Plate (F).
4. Remove the flexible cables from the connectors (SS59,
SS60, SS61, SS62).
5. Disconnect the connectors (SS36, SS37, SS38, SS39).
6. Remove 6 screws and then remove SS3-Board.
6. Remove 6 screws and then remove SS3-Board.
6.24. Removal of SS-Board
1. Remove the Side Angle (L).
(Refer to Removal of Side Angle (L))
2. Remove 4 screws and then remove the Fan Block (F), (G).
24
TH-103PF9UK / TH-103PF9EK
Click on the first or last page to see other TH-103PF9UK / TH-103PF9EK service manuals if exist.